ESAB Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG

Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG Exaton 25.10.4.L is designed for gas shielded arc welding of superduplex stainless steels, such as UNS S32750 (e.g. SAF™ 2507), UNS S32760 and UNS S31803 / S32205 (e.g. SAF™ 2205). It combines high strength with excellent ductility. Exaton 25.10.4.L can also be used for joining UNS S32750 and S32760 to carbon steel or low-alloy steels. Exaton 25.10.4.L can also be used for welding duplex stainless steels when the highest possible corrosion resistance is required. The grade is characterized by excellent resistance to stress corrosion cracking in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. Its corrosion resistance is equal to UNS S31254 (e.g. Alleima® 254SMO™) in most applications.

Weld Star Weldstar Alloy 59 NiCrMo-13 TIG Filler Wire 5KG

Features and Applications Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. Versatile alloy with excellent wet corrosion resistance for the most demanding applications. The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s. Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 276, Alloy 686** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6059 - NiCr23Mo16 AWS A5.14 - ER NiCrMo-13   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max  max max max   0.010 0.50 1.50  0.020 0.005 0.08                 Ni% Co% Al% Cr% Mo%     56.00 max 0.10 22.00 15.00     min 0.30 0.40 24.00 16.50       Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Alloy C276 NiCrMo-4 TIG Filler Wire 5KG

Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4 AWS A5.14 - ER NiCrMo-4   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max max max max   0.05 0.80 0.70 0.030 0.010 0.75                 Cu% Ni% Co% Ti% Al%     max 93.00 max 2.00 max     0.20 min 1.00 3.50 1.00       Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 82 NiCr-3 TIG Filler Wire 5KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 625 NiCrMo-3 TIG Filler Wire 5KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni% Co% Al% Ti% Cr% Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER80S-Ni1 Low Temp Mild Steel TIG Filler Wire 5KG

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.09 0.70 1.20 <0.150 <0.150 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 1.00 <0.15 <0.200 <0.030 <0.50   Mechanical Properties (Typical) Tensile Strength 600 MPa   Yield Strength 480 MPa   Elongation 26%   Impact Strength 100 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER410 Stainless Steel TIG Filler Wire 5KG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG Features and Applications Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion. ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure. Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many  engineering purposes. Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Typically used on applications for heat furnaces and turbine part production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 13 AWS A5.9 - ER 410   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.015 0.55 0.48 0.004 0.028                   Ni% Cr% Mo% Cu%       0.37 12.90 0.08 0.15         Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥250 MPa   Elongation ≥15 %

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER347 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant presence of niobium, that provides resistance to intergranular chromium carbide precipitation, thus increasing the resistance to intergranular corrosion. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for welding and overlay of chromium-nickel stainless steel base metals of similar composition, stabilised either by Nb or Ti (e.g. types 321 and 347). Typically used on applications for the chemical industry, particularly at high temperatures (e.g. equipment intermittently heated within a temperature range varying from 400°C to 800°C). Including applications such as firewalls, pressure vessels, food processing, dairy, oil and textile industries etc.    Typical Base Materials All 300 series austenitic stainless steel, particularly 321 and 347 (stabilised)* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 19 9 Nb Si AWS A5.9 - ER 347Si

Weld Star Weldstar ER316L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. The presence of molybdenum provides creep resistance in a halide atmosphere. Ideal for joining and surfacing of stainless steels of similar composition (CrNi and CrNiMo steels/cast steels). Including low-carbon molybdenum-bearing austenitic alloys. Typically used in the food processing, dairy and chemical industries etc.    Typical Base Materials All 300 series austenitic stainless steel, mainly low-carbon molybdenum-bearing* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 19 12 3 L AWS A5.9 - ER 316L

Weld Star Weldstar ER317L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire used for welding alloys of a similar chemical composition. Ideal for severely corrosive environments where crevice and pitting corrosion are of concern. Low carbon content reduces the possibilities of intergranular carbide precipitation. Not suitable for structural service above 400°C or for cryogenic applications. Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance. Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.    Typical Base Materials Stainless CrNiMo steels e.g. 317L or similar** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 15 3 L AWS A5.9 - ER 317 / 317L   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.43 0.45 <0.030 <0.030                   Ni% Cr% Mo% Cu%       13.60 18.82 3.55 <0.75         Mechanical Properties Tensile Strength ≥480 MPa   Yield Strength ≥300 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER312 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire originally designed to weld cast alloys of similar composition. It gives a two-phase weld deposit with substantial percentages of ferrite in austenite matrix. Ideal for welding dissimilar metals such as carbon steel to stainless steel, particularly those grades high in nickel. Due to its high ferrite level, ER 312 is very adapted to heterogeneous welding, especially when one of the components is fully austenitic. Good corrosion oxidation resistance at high temperature due to its high content of Cr. Service temperatures should be below 420°C to prevent formation of secondary brittle phases. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc.    Typical Base Materials Mild and low alloy steels, stainless steel of similar composition, Buffer layers, armor plate, 409, 304, difficult to weld steels such as:, 25CrMo4, 42CrMo4, 50CrMo4, 42MnV7, 1.7218, 1.7225, 1.7228, 1.7223, AISI: 4130, 4140, 4150, C45, C60, tool steel repairs etc* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 29 9 AWS A5.9 - ER 312

Weld Star Weldstar ER310 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire most often used to weld base metals of similar composition. Excellent resistance to oxidation, especially at high working temperatures (lower than 1000°C) due to its high Cr content. Fully austenitic and therefore sensitive to hot cracking. Ideal for welding and overlay of stainless steels of similar chemical composition including dissimilar welding. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc.    Typical Base Materials 300 series austenitic stainless steel for welding (e.g. AISI 310, 304); mild and carbon steels for overlay works* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 20 AWS A5.9 - ER 310

Weld Star Weldstar ER309L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Good performance under carburising atmospheres. High temperature oxidation and corrosion resistance. ER 309L can be used to weld dissimilar steels and buffer layers. Ideal for joining and overlay of stainless steels of similar composition, such as AISI 309 castings, and for joining of 3Cr12. Typically used on applications in industrial furnaces and boiler parts, annealing chambers, heat exchangers, fused salt treatment installations etc.    Typical Base Materials All 300 series austenitic stainless steel, 3Cr12, mild steels (cladding)* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 23 12 L AWS A5.9 - ER 309L

Weld Star Weldstar ER308L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Offers good corrosion resistance in nitric acid environments. Good mechanical properties at sub-zero temperatures down to -197ºC. Typically used on applications where a good atmospheric corrosion resistance in urban and rural medias is expected, pipes/tubes, boiler engineering, food processing and chemical industries etc.

Weld Star Weldstar ER307Si Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER120S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.110 0.70 1.90 <0.015 <0.015 <0.25 0.50               Ni% Mo% Al% V% Ti% Zr%   2.50 0.50 <0.010 <0.030 0.08 <0.050     Mechanical Properties (Typical) Tensile Strength 1040 MPa   Yield Strength 960 MPa   Elongation 16%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER100S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications NiCrMo fine-grained steels for low temperature high strength applications. Extreme crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub-zero temperatures down to -50°C. Typically used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3NiCrMo AWS A5.28 - ER 100S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.08 0.75 1.40 <0.015 <0.015 <0.25 0.55               Ni% Mo% Al% V% Ti% Zr%   0.60 0.25 <0.020 <0.020 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 730 MPa   Yield Strength 640 MPa   Elongation 20%   Impact Strength 50 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG

Product Overview The Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG is a high-strength aluminium filler metal designed for TIG welding of aluminium-magnesium alloys. Manufactured to deliver reliable weld quality and consistent mechanical performance, ER5556 filler wire is widely used in fabrication where higher weld strength and good corrosion resistance are required. This filler wire contains approximately 5% magnesium with manganese additions, providing strong weld deposits with excellent toughness and resistance to corrosion, particularly in marine and outdoor environments. Supplied in a convenient 2.5 kg pack of TIG rods, it is suitable for both workshop fabrication and production welding applications.   Typical Base Materials 5xxx alloys, such as AlMg4.5Mn, AlMg5, AlMg5Mn, AlMg2.7Mn, AlMgSi1* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5556 (AlMg5Mn1Ti) / Al5556A (AlMg5Mn) AWS A5.10 - ER 5556 / ER 5556A

Weld Star Weldstar ER1070 Al99.7 Aluminium TIG Filler Wire 2.5KG

Features and Applications High purity aluminium wire for welding pure aluminium. Highly resistant to weathering and chemical attack. Good resistance to atmospheric conditions in a wide range of corrosive media, particular alkaline environments. ER 1070 wire offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be pre-heated to (150°C) prior to welding. Typically used on applications for chemistry, electronics, construction and food industries etc.

Weld Star Weldstar ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 2.5KG

Features and Applications Aluminium wire designed to meet the tensile strength requirements of high magnesium alloys. Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. Ideal for applications demanding high fracture toughness and impact. Not recommended for elevated temperature applications. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in shipyards, automotive, railway, tanks and marine component fabrication etc

TP Weld Tables TIG Storage Tube Filler Rod Divider

TEC Products Custom Made(In-House) Divider For TIG Filler Rod Storage Tubes 50MM Comes In Options Of 2Way, 3Way & 4Way Splits The Perfect Solution To Keep Your Different Sized Filler Rod Organized    Designed For Use With The Blue Demon TIG Storage Tubes (Will fit other makes with a 50mm diameter)

BÖHLER Bohler Thermanit 308L TIG Filler Wire 5KG Pack

Bohler Thermanit E308L TIG Filler Wire 5KG Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion-resistant similar to matching low-carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. High toughness at subzero temperatures as low as –196 °C (–321 °F). For joning and surfacing applications with matching and similar – stabilized and non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels/cast steel grades. For joining and surfacing work on cryogenic matching / similar austenitic CrNi(N) steels / cast steel grades.ClassificationsAWS A5.9: ER308LEN ISO 14343-B: SS308LEN ISO 14343-A: W 19 9 L

Blue Demon Welding Products Blue Demon TIG Filler Rod Storage Holder

Blue Demon 36" TIG Rod Storage Tubes Keep your TIG filler rods organised, protected and easy to identify with Blue Demon 36" TIG Rod Storage Tubes. Designed to safely store 36-inch (914mm) TIG welding rods, these durable storage tubes help protect filler metals from moisture, dirt and contamination, ensuring they remain in optimum condition for high-quality welding applications. Manufactured from robust, impact-resistant plastic, Blue Demon storage tubes are ideal for workshop, fabrication and site use. The secure push-fit cap helps keep rods clean and dry during storage and transport, while the clear labelling area allows welders to easily identify filler rod types and grades, reducing the risk of material mix-ups. Suitable for storing a wide range of TIG filler materials, including stainless steel, mild steel, aluminium, nickel alloys and other specialist welding rods, these storage tubes are an essential accessory for maintaining an organised welding workspace. Features & Benefits Designed for storing 36" (914mm) TIG filler rods. Protects welding rods from moisture, dust and contamination. Durable, impact-resistant plastic construction. Secure push-fit end cap keeps contents safe during storage and transport. Clear labelling area for quick identification of filler rod type and grade. Helps prevent material mix-ups and cross-contamination. Ideal for workshop, fabrication, maintenance and site use. Suitable for stainless steel, mild steel, aluminium and specialist TIG filler rods. Lightweight and easy to carry. Ideal Applications TIG welding workshops Fabrication and manufacturing Pipe welding Stainless steel fabrication Aluminium welding Maintenance and repair Mobile welding engineers Whether you're storing fresh filler rods or transporting them between jobs, Blue Demon 36" TIG Rod Storage Tubes provide a simple and effective solution for protecting valuable TIG consumables and keeping your welding equipment organised ***These Come Complete With The Extension Piece For Use With UK Metric Length 1000mm(39")Filler Rod*** Order with our custom Tec Products filler wire tube divider to hold multiple thickness rods, click here for more information. 

SIF No.985 Silicone Copper TIG Brazing Rods

A high-quality copper TIG rod for full fusion welding of deoxidised copper sheet. The deposit is easy flowing and the finished weld is free from copper oxide inclusions. Commonly used in TIG welding for fabrication and repairs of copper pipes, tanks, buzz-bars, etc Used in a variety of coppersmith applications. Also provides good electrical conductivity so is often used in machinery construction and conductor manufacture.  Materials To Be Welded SifSilCopper 985 delivers a viscous weld pool and is typically best used on oxygen-free copper types. A pre-heat may be required on material thicknesses over 50mm (to a maximum of 50°C)

SIF No. 968 Silicon Copper TIG Brazing Rods

A copper rod, containing 3% silicon and 1% manganese used for fusion welding materials of similar composition, copper alloys (brass) and for TIG brazing steels. It is also suitable for surfacing steel and dissimilar metal applications. Excellent performance on galvanized steel and provides good corrosion-resistance. Suitable for use in the ship building/offshore industries as well as the heating and ventilation industries for corrosion resistance, and tubular product fabrication. Can also be used for sculpture repair.  popularly used in TIG for brazing steel and cast iron to copper, brass and bronze. 

SIF No.44 Nickel Aluminium Bronze TIG Brazing Rods

Nickel aluminium bronze for AB2 material and marine/corrosive applications and can be used for the assembly of cupro-aluminium materials of similar composition. Applications: ship propellers, parts for turbines, bearings, valves, sifters, pumps, pipe systems, apparatus engineering, containers. Overlay welding on steel and aluminium bronze including multicomponent alloys

SIF No.32 Aluminium Bronze TIG Brazing Rods

This is a 90/10 aluminium bronze rod suitable for welding materials of a similar composition. br / It is used for surfacing and dissimilar metal joints br / Also TIG brazing on ferrous and dissimilar metals. Suitable for use in ship-building, offshore power generation, and the repair and maintenance process industry. An excellent alloy for building up or over-lapping for wearresistance and corrosion-resistance. 

BÖHLER Bohler Mild Steel TIG Filler Rod EMK 6 - 5KG

Bohler EMK 6 Mild Steel TIG Filler Rod - 5KG ER70S-6 Mild Steel Filler Rod GTAW rod with high silicon content. The welding rod is suited for joints in boiler and vessel fabrication as well as in structural steel engineering. Böhler EMK 6 can be used in sour gas applications (HIC-Test acc. to NACE TM-02-84). Test values for SSC-test are available too. Spec: AWS A5.18 ER70S-6 Rod Diameter: 1.6mm, 2.0mm, 2.4mm, 3.2mm Approvals: TÜV (09717.), LTSS, SEPROZ, CE  

BÖHLER Bohler Union 5356 ALMG5 Aluminium Tig Filler Rod 2.5KG

Böhler Union ALMG5(5356) Aluminium Magnesium TIG Filler Rods 5KG TIG welding rod for AlMg alloys containing up to 5 % Mg. High Strength: 5356 wire has relatively high tensile strength, making it suitable for applications where strength is a primary concern, such as in boat and shipbuilding, aerospace, and structural welding. Good Corrosion Resistance: This alloy offers good resistance to corrosion, which is vital for applications exposed to harsh environments, like marine or outdoor structures. Weldability: 5356 wire is known for its ease of use and smooth arc characteristics, making it suitable for both beginner and experienced welders. Low Melting Point: It has a lower melting point compared to some other aluminum alloys, which can help reduce the risk of burn-through or warping when welding thin aluminum materials. Anodizing Compatibility: 5356 aluminum is compatible with anodizing, which is a surface treatment process often used in various applications. Versatility: It can be used to weld various aluminum alloys, including 5052, 5083, 5086, 5154, and 6061. Spec: AWS A5.10 ER5356 Rod Diameter: 1.6mm, 2.4mm, 3.2mm Approvals: TÜV (2198.), DB (61.132.01)

BÖHLER Bohler Union 4043 ALSi5 Aluminium TIG Filler Rod 2.5KG

Bohler 4043 Aluminium TIG Filler Rod containing 5% silicon. Filler Rod for GTAW of Al alloys containing up to 2% of alloying elements and for aluminium alloys containing up to 7% Si. Very fluid weld pool. Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.  

BÖHLER Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE