Weld Star Weldstar A32 ER0S-B2 Low Alloy TIG Filler Wire 5KG

Features and Applications Low alloy copper coated wire with 1.25% Cr and 1% Mo content used for the welding of heat-resistant steels. Suitable for welding 0.9% Cr and 0.5% Mo steels. Designed for high temperature power generation applications. Recommended working temperatures of up to 550°C. Typically used on equipment for the chemical and ammonia synthesis process, heat exchangers, boilers, pipes, pressure vessels, petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials 13CrMo4-5, G17CrMo55, A387:2,11,12, A200: T11, T12, GS 25CrMo4, GS 18CrMo910, 10CrMo910, 10CrSiMoV7, 10CrV63, 12CrSiMo8** Illustrative, not exhaustive list   Standards EN ISO 21952-B - 1CM AWS A5.28 - ER 80S-B2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.55 0.60 <0.012 <0.015 <0.25             Cr% Ni% Mo% Al% V% Fx ppm 1.30 <0.20 0.50 <0.020 <0.010 <15

BÖHLER Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack

Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack Classifications EN ISO 18273-A AWS A5.10 S Al 5183 (AlMg4,5Mn0,7(A)) ER5183 Characteristics and typical fields of application TIG-rod for welding of AlMg alloys. The weld metal is resistant against sea water. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mm Base materials EN AW-5083 [AlMg4,5Mn0,7] AlMg4,5Mn 3.3547 EN AW-5086 [AlMg4] AlMg4Mn 3.3545 EN AW-5019 [AlMg5] AlMg5 3.3555 EN AW-6060 [AlMgSi] AlMgSi0,5 3.3206 EN AW-6005A [AlSiMg(A)] AlMgSi0,7 3.3210 EN AW-6082 [AlSi1MgMn] AlMgSi1 3.2315 EN AW-6061 [AlMg1SiCu] AlMg1SiCu 3.3211 EN AW-7020 [AlZn4,5Mg1] AlZn4,5Mg 3.4335 EN AC-51300 G-AlMg5 3.3561 EN AC-51400 G-AlMg5Si 3.3261 Typical analysis of TIG-rod (wt.-%) Al Mg Mn Cr Ti wt.-% bal. 4.3 – 5.2 0.6 – 1.0 0.05 – 0.25 < 0.15 Mechanical properties of all-weld metal Yield strength Rp0.2 Tensile strength Rm Elongation A (L0=5d0) MPa MPa % 125 275 17 Operating data Polarity: AC Shielding gases: (EN ISO 14175) I1 Marks: 3.3548 / AlMg4,5Mn ø mm 1.6 2.0 2.4 3.2 4.0 Approvals TÜV (02196), DB (61.132.03), CE

Weld Star Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium wire for welding aluminium alloys with a maximum 5% Magnesium. Features and Applications Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. AlMg5 is one of the most popular types of aluminium alloys. ER 5356 can also be used for welding components that need to be anodized. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in the construction of boats, bicycles, trucks, pressure vessels, storage tanks, railways and automotive industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; AlMgMn, AlZnMg1, G-AlMg3Si, G-AlMg5Si, G-AlMg10, AlMg1SiCu, AlMgSi0,7, AlZn4,5Mg1, AlSi1MgMn, AlSiMg(A), 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020, EN AC 51400, EN AC 51300, EN AC 51100, EN AW 5454* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5356 (AlMg5Cr(A)) AWS A5.10 - ER 5356   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     0.0401 0.1561 0.0014 0.1140 4.8277                   Cr% Zn% Ti% Be% Al%     0.1383 0.0048 0.0939 <0.0001 Rem.       Mechanical Properties Tensile Strength ≥235 MPa   Yield Strength ≥110 MPa   Elongation ≥17 %   Impact Strength ≥16 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium TIG Filler wire for welding aluminium alloys with a maximum 2% alloying elements. Including aluminium alloys containing up to 7% Si. Features and Applications: The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice for welders. ER 4043 is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Thicker sections should be preheated to (150°C) prior to welding. Typically used on many industrial manufacturing sectors, such as automotive, production of mobile equipment and shipbuilding etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, 3.3210, 3.2315, 3.3211, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AC 45000* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 4043 (AlSi5) AWS A5.10 - ER 4043   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     5.0198 0.1578 0.0124 0.0035 0.0051                   Zn% Ti% Be% Al%       0.0036 0.0177 <0.0001 Rem.         Mechanical Properties Tensile Strength ≥120 MPa   Yield Strength ≥40 MPa   Elongation ≥8 %   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

ESAB Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG

Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG Exaton 25.10.4.L is designed for gas shielded arc welding of superduplex stainless steels, such as UNS S32750 (e.g. SAF™ 2507), UNS S32760 and UNS S31803 / S32205 (e.g. SAF™ 2205). It combines high strength with excellent ductility. Exaton 25.10.4.L can also be used for joining UNS S32750 and S32760 to carbon steel or low-alloy steels. Exaton 25.10.4.L can also be used for welding duplex stainless steels when the highest possible corrosion resistance is required. The grade is characterized by excellent resistance to stress corrosion cracking in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. Its corrosion resistance is equal to UNS S31254 (e.g. Alleima® 254SMO™) in most applications.

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG

Product Overview The Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG is a high-strength aluminium filler metal designed for TIG welding of aluminium-magnesium alloys. Manufactured to deliver reliable weld quality and consistent mechanical performance, ER5556 filler wire is widely used in fabrication where higher weld strength and good corrosion resistance are required. This filler wire contains approximately 5% magnesium with manganese additions, providing strong weld deposits with excellent toughness and resistance to corrosion, particularly in marine and outdoor environments. Supplied in a convenient 2.5 kg pack of TIG rods, it is suitable for both workshop fabrication and production welding applications.   Typical Base Materials 5xxx alloys, such as AlMg4.5Mn, AlMg5, AlMg5Mn, AlMg2.7Mn, AlMgSi1* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5556 (AlMg5Mn1Ti) / Al5556A (AlMg5Mn) AWS A5.10 - ER 5556 / ER 5556A

Weld Star Weldstar ER1070 Al99.7 Aluminium TIG Filler Wire 2.5KG

Features and Applications High purity aluminium wire for welding pure aluminium. Highly resistant to weathering and chemical attack. Good resistance to atmospheric conditions in a wide range of corrosive media, particular alkaline environments. ER 1070 wire offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be pre-heated to (150°C) prior to welding. Typically used on applications for chemistry, electronics, construction and food industries etc.

Weld Star Weldstar ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 2.5KG

Features and Applications Aluminium wire designed to meet the tensile strength requirements of high magnesium alloys. Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. Ideal for applications demanding high fracture toughness and impact. Not recommended for elevated temperature applications. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in shipyards, automotive, railway, tanks and marine component fabrication etc

TP Weld Tables TIG Storage Tube Filler Rod Divider

TEC Products Custom Made(In-House) Divider For TIG Filler Rod Storage Tubes 50MM Comes In Options Of 2Way, 3Way & 4Way Splits The Perfect Solution To Keep Your Different Sized Filler Rod Organized    Designed For Use With The Blue Demon TIG Storage Tubes (Will fit other makes with a 50mm diameter)

Blue Demon Welding Products Blue Demon TIG Filler Rod Storage Holder

Blue Demon 36" TIG Rod Storage Tubes Keep your TIG filler rods organised, protected and easy to identify with Blue Demon 36" TIG Rod Storage Tubes. Designed to safely store 36-inch (914mm) TIG welding rods, these durable storage tubes help protect filler metals from moisture, dirt and contamination, ensuring they remain in optimum condition for high-quality welding applications. Manufactured from robust, impact-resistant plastic, Blue Demon storage tubes are ideal for workshop, fabrication and site use. The secure push-fit cap helps keep rods clean and dry during storage and transport, while the clear labelling area allows welders to easily identify filler rod types and grades, reducing the risk of material mix-ups. Suitable for storing a wide range of TIG filler materials, including stainless steel, mild steel, aluminium, nickel alloys and other specialist welding rods, these storage tubes are an essential accessory for maintaining an organised welding workspace. Features & Benefits Designed for storing 36" (914mm) TIG filler rods. Protects welding rods from moisture, dust and contamination. Durable, impact-resistant plastic construction. Secure push-fit end cap keeps contents safe during storage and transport. Clear labelling area for quick identification of filler rod type and grade. Helps prevent material mix-ups and cross-contamination. Ideal for workshop, fabrication, maintenance and site use. Suitable for stainless steel, mild steel, aluminium and specialist TIG filler rods. Lightweight and easy to carry. Ideal Applications TIG welding workshops Fabrication and manufacturing Pipe welding Stainless steel fabrication Aluminium welding Maintenance and repair Mobile welding engineers Whether you're storing fresh filler rods or transporting them between jobs, Blue Demon 36" TIG Rod Storage Tubes provide a simple and effective solution for protecting valuable TIG consumables and keeping your welding equipment organised ***These Come Complete With The Extension Piece For Use With UK Metric Length 1000mm(39")Filler Rod*** Order with our custom Tec Products filler wire tube divider to hold multiple thickness rods, click here for more information. 

BÖHLER Bohler Union 5356 ALMG5 Aluminium Tig Filler Rod 2.5KG

Böhler Union ALMG5(5356) Aluminium Magnesium TIG Filler Rods 5KG TIG welding rod for AlMg alloys containing up to 5 % Mg. High Strength: 5356 wire has relatively high tensile strength, making it suitable for applications where strength is a primary concern, such as in boat and shipbuilding, aerospace, and structural welding. Good Corrosion Resistance: This alloy offers good resistance to corrosion, which is vital for applications exposed to harsh environments, like marine or outdoor structures. Weldability: 5356 wire is known for its ease of use and smooth arc characteristics, making it suitable for both beginner and experienced welders. Low Melting Point: It has a lower melting point compared to some other aluminum alloys, which can help reduce the risk of burn-through or warping when welding thin aluminum materials. Anodizing Compatibility: 5356 aluminum is compatible with anodizing, which is a surface treatment process often used in various applications. Versatility: It can be used to weld various aluminum alloys, including 5052, 5083, 5086, 5154, and 6061. Spec: AWS A5.10 ER5356 Rod Diameter: 1.6mm, 2.4mm, 3.2mm Approvals: TÜV (2198.), DB (61.132.01)

BÖHLER Bohler Union 4043 ALSi5 Aluminium TIG Filler Rod 2.5KG

Bohler 4043 Aluminium TIG Filler Rod containing 5% silicon. Filler Rod for GTAW of Al alloys containing up to 2% of alloying elements and for aluminium alloys containing up to 7% Si. Very fluid weld pool. Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.  

BÖHLER Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE