Weld Star Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG

Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG Features and Applications Rutile-cellulosic electrode with good weldability in all positions. Exceptional arc stability and reduced spatter for decreased cleaning time. Suitable for low open circuit voltage transformers (min. OCV 42V). Typical applications include assembly, workshop and repair welding of mild and low-alloyed steels. Re-drying not generally required. If necessary 100-110°C for 1 hour.    Typical Base Materials 235JR-S355JR, S235JO-S355JO, P195TR1-P265TR1, P195GH-P265GH, L245NB-L360NB, L245MB-L360MB, shipbuilding steels: A, B, D ASTM A 106 Gr. A, B; A 283 Gr. A, C; A 285 Gr. A, B, C; A 501 Gr. B; A 573 Gr. 58, 65; A 633 Gr. A, C; A 711 Gr. 1013 API 5 L Gr. B, X42, X52** Illustrative, not exhaustive list   Standards EN ISO 2560-A - E 42 0 RC 11 AWS A5.1 - E6013   Analysis of all-weld metal % (Typical) C% Si% Mn% P% S% 0.08 0.40 0.45 0.020 0.015   Mechanical Properties (Typical) Tensile Strength 535 MPa   Yield Strength 445 MPa   Elongation 24%   Impact Strength ≥50 J   Test Temperature 0ºC   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.   Welding Parameters Ømm Current (A) 2.50 mm 50-90 3.20 mm 80-130 4.00 mm 140-190   Polarity AC; DC (+)(-)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Supercast Ultima Cast Electrodes - 2KG

SUPER CAST ULTIMA AWS A 5.15 : ENi-C1  Excellent Weldability Easy Slag Removel Crack Resistant Excellent For Joining and Repairing of Grey Cast Iron Description Super Cast Ultima is a Nickel electrode for welding of grey cast iron, malleable iron, cast iron and for welding on fatigued cast parts. For rectification of castings. Super Cast ultima gives perfect welding results even at low amperage's. The arc is smooth and intensive, with low spatter, easy removal of slag. The weld is soft machinable, also in the fusion zone.  Typical weld metal Chemical composition (%) C Si Mn Ni Fe 1.00 0.50 .0.35 97.50 REM All weld metal mechanical properties(typical): Tensile strength N/mm2 Hardness HB  450  165 approx.  Welding guide. Clean welding area carefully and remove cast skin from base material. Low heat input during welding is required. On thicker material preheating up 150°C is recommended. Weld bead width is not to be lager than twice of electrode diameter, maximum length 10 times diameter,in a single pass. To reduce the tension the weld should be penned just after welding. Allow the work piece to cool slowly on completion of welding. Weld deposits are fully machinable.