ESAB MW2000 Welding Overalls Flame Resistant

The ESAB MW2000 Flame Resistant Welding Overalls are professional protective workwear designed specifically for welding, fabrication and associated industrial applications where protection against heat, flame and welding hazards is required. Designed with the demands of professional welders in mind, the MW2000 provides full-body coverage while maintaining the comfort and freedom of movement required for everyday workshop use. The flame-resistant construction helps protect the wearer against brief contact with flame, heat and welding-related hazards, while the overall design helps reduce exposed areas compared with separate jacket and trouser combinations. Practical pockets provide convenient storage for everyday workplace essentials, while the durable construction makes the MW2000 well suited to fabrication shops, engineering facilities, maintenance departments and other demanding industrial environments. Backed by the trusted ESAB name, the MW2000 is an excellent choice for professional welders looking for dependable protective clothing designed around the requirements of welding and fabrication. Key Features Genuine ESAB MW2000 welding overalls Flame-resistant protective workwear Designed specifically for welding and fabrication Full-body overall design Helps protect against heat and brief contact with flame Protection against welding-related hazards Durable construction for professional use Designed to provide good freedom of movement Practical storage pockets Suitable for extended workshop use Ideal for welders, fabricators and maintenance professionals Safety Standards & Specification Codes The MW2000 range is designed as protective clothing for welding and associated industrial applications. EN ISO 11611 – Protective clothing for use in welding and allied processes. EN ISO 11612 – Protective clothing providing protection against heat and flame. Always refer to the certification and garment label supplied with the product for the exact class and performance levels applicable to the specific MW2000 garment. Typical Applications Ideal for: MIG/MAG welding TIG welding MMA/Stick welding General fabrication Engineering Metalworking Maintenance and repair Industrial welding environments Specification Brand: ESABModel: MW2000Product Type: Welding Overalls / CoverallsProtection: Flame ResistantStandards: EN ISO 11611 & EN ISO 11612Application: Welding, Fabrication & Industrial Work The ESAB MW2000 Flame Resistant Welding Overalls provide professional welders and fabricators with a practical combination of protection, durability and everyday working comfort. Please Note: Welding PPE should always be selected according to the welding process, workplace risk assessment and level of heat, flame, spatter and other hazards present.

Portwest FV06 Composite Nubuck Mid Boot S7L LG FO SR SC

The Portwest FV06 Composite Nubuck Mid Boot is a premium safety boot designed to provide a high level of protection, durability and comfort for demanding professional and industrial working environments. Featuring a durable nubuck leather upper and composite safety protection, the FV06 provides an excellent option for workers looking for robust safety footwear without relying on a traditional steel toe cap. The S7L safety classification provides comprehensive workplace protection, including resistance to water penetration and absorption, making these boots particularly well suited to demanding indoor and outdoor working conditions. Additional LG, FO, SR and SC ratings provide further protection for workers operating on ladders, slippery surfaces and in environments where resistance to fuel oil and additional scuff protection are beneficial. Ideal for engineering, fabrication, construction, maintenance and general industrial applications, the Portwest FV06 combines modern safety technology with a comfortable mid-cut design suitable for everyday professional use. Key Features Premium Portwest FV06 safety boot Durable nubuck leather upper Composite safety toe cap Non-metallic penetration-resistant midsole S7L rated safety footwear Waterproof construction for demanding conditions LG – Ladder Grip for improved performance when working on ladders FO – Fuel Oil Resistant outsole SR – Slip Resistant outsole SC – Scuff Cap protection Mid-cut design for additional ankle support Suitable for demanding indoor and outdoor environments Ideal for extended professional use Safety Standards & Specification Codes S7L – S3-level protective features combined with enhanced water resistance requirements and a non-metallic penetration-resistant insert tested with a 4.5mm nail. LG – Ladder Grip: outsole construction designed to provide improved security when standing on ladder rungs. FO – Fuel Oil Resistance: outsole resistant to fuel oil. SR – Slip Resistance: additional slip-resistance testing for workplace surfaces. SC – Scuff Cap: additional abrasion resistance over the toe area to help protect the footwear during kneeling and demanding work. Standard: EN ISO 20345:2022 Typical Applications Ideal for: Welding and fabrication Engineering Construction and site work Manufacturing Maintenance Warehousing and logistics Utilities Outdoor industrial work General workshop applications Specification Brand: PortwestModel: FV06Product Type: Composite Mid Safety BootUpper: Nubuck LeatherToe Cap: CompositeMidsole: Non-Metallic Penetration ResistantSafety Rating: S7L LG FO SR SCStandard: EN ISO 20345:2022Application: Professional & Industrial Safety Footwear The Portwest FV06 Composite Nubuck Mid Boot is an excellent choice for professionals requiring waterproof, metal-free safety footwear with excellent slip resistance and comprehensive workplace protection.

Portwest Wraparound Safety Glasses - Smoke PR01

The Portwest PR01 Wraparound Safety Glasses with Smoke Lenses provide lightweight and comfortable eye protection for professional, industrial and general workplace applications. Featuring a smoke-tinted lens, these safety glasses are particularly suited to working in bright conditions where protection from glare and sunlight is beneficial. The wraparound design provides excellent coverage around the eyes while maintaining a wide field of vision. The lightweight construction makes the PR01 comfortable for prolonged periods of wear, while the close-fitting wraparound profile provides additional side protection without the need for separate side shields. Ideal for construction, engineering, fabrication, maintenance and outdoor work, these Portwest safety glasses provide a practical combination of eye protection, comfort and sun-glare reduction. Key Features Genuine Portwest PR01 safety glasses Smoke-tinted lens Wraparound design for excellent eye coverage Helps reduce glare in bright working conditions Lightweight and comfortable construction Wide field of vision Integrated side protection Suitable for prolonged periods of wear Ideal for indoor and outdoor industrial applications Suitable for professional workplace use Standards & Specification Codes EN 166 – Personal eye protectionEN 172 – Solar protection filters for industrial useLens Marking: 5-3.1Optical Class: 1 – Suitable for continuous useMechanical Strength: F – Low-energy impact protection Specification Brand: PortwestModel: PR01Product Type: Wraparound Safety GlassesLens Colour: SmokeLens Type: Tinted / Solar ProtectionStyle: WraparoundStandards: EN 166, EN 172Application: Workplace & Industrial Eye Protection Typical Applications Ideal for engineering, fabrication, construction, maintenance, manufacturing, site work and general outdoor industrial applications, particularly where bright light or glare is present. The Portwest PR01 Smoke Wraparound Safety Glasses provide an economical and comfortable solution for everyday workplace eye protection while offering the added benefit of a smoke lens for brighter working conditions. Please Note: Always ensure the lens shade and protection rating are appropriate for the specific workplace hazard. These glasses are not intended to replace specialist welding eye protection.

Portwest Amber Wraparound Safety Glasses PR01

The Portwest PR01 Amber Wraparound Safety Glasses provide lightweight and comfortable eye protection for a wide range of professional, workshop and industrial applications. Featuring an amber-tinted lens, these safety glasses are particularly useful in lower-light working environments where enhanced visual contrast can help improve visibility. The wraparound design provides excellent coverage around the eyes while maintaining a wide and unrestricted field of vision. Their lightweight construction makes the PR01 glasses comfortable for extended periods of wear, making them an excellent everyday choice for engineering, fabrication, maintenance, warehousing and general workshop duties. The close-fitting wraparound style also provides additional side coverage without the need for bulky separate side shields, combining practical protection with a comfortable, streamlined design. Key Features Genuine Portwest PR01 safety glasses Amber-tinted lenses Wraparound design for excellent eye coverage Helps improve contrast in suitable low-light conditions Wide field of vision Lightweight and comfortable construction Integrated side coverage Suitable for extended periods of wear Ideal for professional and industrial applications Practical everyday workplace eye protection Typical Applications Ideal for: Engineering and fabrication Manufacturing Maintenance Warehousing Assembly work Workshops Construction General industrial applications Specification Brand: PortwestModel: PR01Product Type: Wraparound Safety GlassesLens Colour: AmberStyle: WraparoundApplication: Workplace Eye Protection EN ISO 16321:2022 UL1.2 CT 1 (Amber) The Portwest PR01 Amber Wraparound Safety Glasses are a practical choice for workers requiring lightweight eye protection, good coverage and enhanced contrast in suitable working conditions. Please Note: Always ensure the safety glasses provide the appropriate level of protection for the specific hazards and working environment.

Portwest PG66 Ultra Safe Anti-Scratch/Anti-Fog Vented Goggles

The Portwest PG66 Ultra Safe Vented Goggles are designed to provide dependable eye protection while maintaining excellent visibility and wearer comfort in demanding workplace environments. Featuring anti-scratch and anti-fog lens treatments, the PG66 helps maintain a clear field of vision during extended periods of use. The vented design encourages airflow around the goggles, further helping to reduce the build-up of condensation in changing working conditions. The wrap-around goggle design provides increased coverage around the eye area, while the adjustable head strap helps achieve a secure and comfortable fit. They are particularly useful for tasks where conventional safety spectacles may not provide sufficient coverage. Ideal for engineering, fabrication, manufacturing, maintenance and general workshop applications, the Portwest PG66 Ultra Safe Goggles provide a practical combination of protection, visibility and comfort. Key Features Genuine Portwest PG66 Ultra Safe safety goggles Anti-fog lens treatment for improved visibility Anti-scratch coating for increased lens durability Vented design promotes airflow Helps reduce lens misting during use Wide eye-area coverage Adjustable head strap for a secure fit Comfortable design for extended periods of wear Suitable for professional and industrial environments Ideal for workshop, engineering and maintenance applications Typical Applications Ideal for: Engineering and fabrication Grinding and metalworking Manufacturing Maintenance Construction Workshop environments General industrial applications Specification Brand: PortwestModel: PG66Range: Ultra SafeProduct Type: Safety GogglesLens Features: Anti-Scratch & Anti-FogVentilation: VentedApplication: Workplace Eye Protection The Portwest PG66 Ultra Safe Vented Goggles are an excellent choice for professionals looking for comfortable eye protection with anti-fog performance, durable lenses and increased eye coverage. Please Note: Always select eye protection appropriate to the specific workplace hazard and required protection level.

Portwest EP02 Ear Plug Dispenser With 500 Pairs of Ear Plugs

The Portwest EP02 Ear Plug Dispenser provides a convenient and economical way to make disposable hearing protection readily available throughout the workplace. Supplied complete with 500 pairs of ear plugs, it is ideal for busy workshops, factories, fabrication shops and other high-noise working environments. The practical dispenser allows workers and visitors to quickly access individual ear plugs when required, helping businesses maintain an organised supply of hearing protection in areas where noise exposure is a concern. With 500 pairs included, the EP02 is particularly well suited to larger workplaces or high-traffic areas where disposable ear plugs are used regularly. The dispenser can be positioned at a convenient access point, making it easy for employees to obtain hearing protection before entering designated noise areas. An excellent choice for welding and fabrication shops, engineering facilities, manufacturing plants and general industrial environments requiring an easily accessible bulk supply of ear protection. Key Features Genuine Portwest EP02 ear plug dispenser Supplied with 500 pairs of ear plugs Convenient bulk hearing protection solution Provides quick and easy access to disposable ear plugs Ideal for positioning near designated high-noise areas Helps keep workplace PPE organised and readily available Suitable for employees, contractors and visitors Ideal for busy industrial and manufacturing environments Cost-effective solution for workplaces with multiple users Suitable for professional and industrial applications Typical Applications Ideal for: Welding and fabrication workshops Engineering facilities Manufacturing plants Factories Metalworking environments Construction and maintenance Production areas Other high-noise workplaces Specification Brand: PortwestModel: EP02Product Type: Ear Plug DispenserContents: 500 Pairs of Ear PlugsApplication: Workplace Hearing ProtectionSuitable For: Industrial & Professional Use The Portwest EP02 Ear Plug Dispenser is an ideal solution for businesses looking to provide a large, easily accessible supply of disposable hearing protection for employees and visitors. Please Note: Hearing protection should always be selected according to workplace noise levels and the level of attenuation required for the application.

Portwest PW78 HV Extreme Ear Defenders With Neckband

The Portwest PW78 HV Extreme Ear Defenders with Neckband provide dependable hearing protection for workers operating in high-noise industrial and workplace environments. Featuring a practical behind-the-neck band design, the PW78 offers an alternative to traditional over-the-head ear defenders and is particularly useful when other head-worn PPE is required. The design helps provide a secure and comfortable fit while keeping the top of the head unobstructed. Part of Portwest's professional hearing protection range, these ear defenders feature high-visibility styling for increased visibility in busy working environments. Comfortable ear cushions help provide a good seal around the ears while improving wearer comfort during extended periods of use. Ideal for welding and fabrication shops, engineering, construction, manufacturing and other noisy working environments where reliable hearing protection is required. Key Features Professional Portwest hearing protection Behind-the-neck / neckband design Leaves the top of the head unobstructed Ideal when used alongside compatible head-worn PPE High-visibility design Comfortable cushioned ear cups Designed for use in high-noise working environments Suitable for extended periods of wear Ideal for professional and industrial applications Portwest model PW78 Typical Applications Ideal for use within: Welding and fabrication Engineering workshops Manufacturing Construction Metalworking Maintenance Industrial environments Other high-noise workplaces Specification Brand: PortwestModel: PW78Range: HV ExtremeProduct Type: Ear Defenders / Hearing ProtectionBand Type: Neckband / Behind-the-NeckApplication: Workplace & Industrial Hearing Protection The Portwest PW78 HV Extreme Ear Defenders are a practical choice where effective hearing protection is required alongside the flexibility of a neckband design. Please Note: Hearing protection should always be selected according to the measured workplace noise level and the required level of attenuation.

Kemper Profimaster Pre-Filter Mats 10 Pack

The Kemper ProfiMaster Pre-Filter Mats 1090033 are genuine replacement pre-filters designed for use with compatible Kemper ProfiMaster welding fume extraction units. The pre-filter mat forms an important part of the filtration system, helping to capture larger particles before they reach the main filter. Regular replacement can help maintain effective airflow and filtration performance while reducing unnecessary loading of the main filter. Supplied as a convenient pack of 10, these replacement mats are ideal for workshops carrying out routine maintenance on their Kemper welding fume extraction equipment. Using the correct replacement filtration components helps ensure your fume extraction system continues to operate efficiently, making these pre-filter mats an essential maintenance item for fabrication shops, welding workshops and engineering environments. Key Features Genuine Kemper replacement pre-filter mats Designed for compatible ProfiMaster fume extraction units Helps capture larger particles before the main filter Helps reduce loading on the main filtration system Supports effective airflow and extraction performance Ideal for routine fume extractor maintenance Quick and straightforward replacement Supplied as a pack of 10 Kemper part number 1090033 Typical Applications Ideal for routine servicing and maintenance of compatible Kemper ProfiMaster welding fume extraction systems used within welding workshops, fabrication shops, engineering facilities and industrial environments. Specification Brand: KemperRange: ProfiMasterProduct Type: Pre-Filter MatPart Number: 1090033Pack Quantity: 10Application: Welding Fume Extraction Filtration & Maintenance Please Note: Check your Kemper fume extraction unit model and existing filter specification before ordering to ensure compatibility.

ESAB Autrodur 56 G M Hardfacing MIG Wire 1.0MM 15KG

ESAB Autrodur 56 G M Hardfacing MIG Wire 1.0mm 15kg The ESAB Autrodur 56 G M Hardfacing MIG Wire is a high-quality solid wire designed for hardfacing and wear-resistant applications where components are subjected to demanding service conditions. Supplied in 1.0mm diameter on a 15kg spool, Autrodur 56 G M provides an efficient solution for building up and hardfacing steel components using the MIG/MAG welding process. It is particularly suited to the repair and maintenance of parts where increased resistance to abrasive wear is required. Ideal for professional repair, maintenance, engineering and fabrication environments, this ESAB hardfacing wire can help extend the service life of worn components, reducing the need for frequent replacement of expensive parts. Key Features Premium ESAB hardfacing MIG/MAG wire Autrodur 56 G M grade 1.0mm wire diameter Supplied on a 15kg spool Designed for producing hard, wear-resistant deposits Excellent choice for components exposed to abrasive wear Suitable for repair, maintenance and component rebuilding Helps extend the working life of worn steel components Ideal for professional engineering and industrial applications Consistent ESAB quality and welding performance Typical Applications Suitable for hardfacing and rebuilding a variety of wear-prone steel components, particularly within maintenance, repair, agricultural, engineering and heavy industrial environments. Typical applications can include wear plates, edges, rollers and other components subjected to abrasive service conditions, subject to the suitability of the base material and required finished properties. Specification Brand: ESABProduct Range: AutrodurGrade: 56 G MProduct Type: Hardfacing MIG/MAG WireWire Diameter: 1.0mmSpool Weight: 15kgProcess: MIG/MAG Hardfacing For best results, the correct welding parameters, shielding gas and preparation should be selected according to the base material and required hardfacing properties.

Giove 500 Pipe Roller Set 500kg 230V

The Automa GIOVE Welding Pipe Roller system is supplied with a powered roller and an idle roller, suitable for the powered rolling of pipes and tubes up to 500KG.  Made by welding positioner specialist Automa in Italy, these 230v welding positioners enhance productivity when welding items such as pipe, shafts, wheels, elbows and other cylindrical workpieces.  The pipe sits on the rollers and the powered roller will turn it at a constant speed to aid welding the join.  The system is supplied on a slotted aluminium base, allowing the rollers to be positioned to suit the diameter of pipe being turned. Capable of securing a workpiece diameter between 20 – 500mm, the roller drive has a DC electric motor to turn the workpiece. The integrated gearbox ensures smooth operation. Other features include a continuously adjustable speed range of 80 – 1700 mm/min, making it suitable for both MIG and TIG applications.  The pipe roller has an aluminium base and the wheels are polyurethane coated.   Product Features Drive type: DCTravel speed: 80 – 1700 mm/min (Approx 0.17 to 3.6 RPM)Connection voltage: 230 V or 110V (Depending on Model Chosen)Phase: Single

Jasic Procut 1200 CNC Plasma Table C/W Jasic EVO 45A Plasma Cutter

Jasic Procut 1200 CNC Plasma Table C/W Jasic EVO 45A Plasma Cutter   The PRO-CUT 1200 is a cost effective space saving solution for CNC precision quality cutting demands, suitable for light fabrication workshops and educational centres.  Designed with simplicity and usability in mind, the PRO-CUT 1200 is easy to install and operate, meaning the operator can achieve high quality cuts right away. 

TIG Aesthetics 4.5/5" Silicone Purge Plugs

TIG Aesthetics By Ticon 4.5/5" Silicone Purge Plugs TIG Aesthetics by Ticon – 4.5/5" Silicone Purge Plugs Precision Engineered for Clean, Consistent Weld Purging The TIG Aesthetics by Ticon 4.5/5" Silicone Purge Plugs are a premium solution for weld purging applications, specifically designed for use in stainless steel and titanium TIG welding. Manufactured from high-quality, high-temperature silicone, these plugs provide a reliable, airtight seal inside pipework and tubing during purging operations, ensuring optimal shielding gas coverage and oxygen displacement. Built to fit 4.5/5"  pipe and tube, these reusable silicone plugs are ideal for fabricators and welders demanding consistently clean, oxide-free welds—especially critical in food-grade, aerospace, pharmaceutical, and high-purity process industries. Key Features: High-Temperature Resistant Silicone – Withstands elevated temperatures without warping or degrading, making it perfect for prolonged TIG welding operations. Flexible & Durable Construction – Conforms to slight pipe variations while maintaining a secure fit, ideal for repeated use. Optimized Gas Sealing – Creates a tight seal to maintain positive pressure and effective shielding during back purging. Reusable & Cost-Efficient – Easily cleaned and long-lasting, offering excellent value over time compared to single-use alternatives. Color-Coded for Quick Sizing – Allows for fast identification of sizes in workshop environments. Technical Specifications: Size Compatibility: 4.5/5" OD Pipe  Material: High-grade silicone (food-safe and chemical resistant) Temperature Resistance: Up to approx. 315°C (600°F) Reusability: Multiple weld cycles with proper care Seal Type: Friction-fit, gas-tight seal Recommended Use: With inert gases such as Argon for TIG purging Applications: Stainless steel and titanium TIG welding Pipe and tube fabrication Food-grade and pharmaceutical installations Aerospace and high-purity systems Any application requiring weld oxide prevention on the ID Why Choose TIG Aesthetics by Ticon Purge Plugs?   Trusted by top fabricators around the world, these silicone purge plugs offer a high-performance, reusable solution for back purging operations. Designed for precision and built for durability, they help achieve flawless internal welds, saving time on post-weld cleaning and ensuring compliance with even the most stringent weld standards. Replacement purge plugs for the TIG Aesthetics sets  Come as a pack of 2 plugs with diffusers 

Jasic Procut 1200 CNC Plasma Table C/W Jasic EVO 80A Plasma Cutter

Jasic Procut 1200 CNC Plasma Table C/W Jasic EVO 80A Plasma Cutter   The PRO-CUT 1200 is a cost effective space saving solution for CNC precision quality cutting demands, suitable for light fabrication workshops and educational centres.  Designed with simplicity and usability in mind, the PRO-CUT 1200 is easy to install and operate, meaning the operator can achieve high quality cuts right away. 

Jasic Procut 1200 CNC Plasma Table C/W Jasic 100A Plasma Cutter

The PRO-CUT 1200 is a cost effective space saving solution for CNC precision quality cutting demands, suitable for light fabrication workshops and educational centres.  Designed with simplicity and usability in mind, the PRO-CUT 1200 is easy to install and operate, meaning the operator can achieve high quality cuts right away.   

Kemppi Master M 355G Pulse Watercooled MIG Welder 350A 415V

Kemppi Master M 355G Pulse Water-Cooled MIG Welder – 350A, 415V The Kemppi Master M 355G Pulse is a premium-grade MIG/MAG welding power source engineered for demanding industrial environments where precision, control, and productivity are paramount. Featuring advanced pulsed welding capabilities, a robust water-cooled design, and intuitive control systems, this 350 A, 415 V unit delivers superior arc performance across a wide range of materials and thicknesses. Built on Kemppi’s Master platform — renowned for durability, versatility, and performance — the Master M 355G Pulse is ideal for heavy fabrication, structural welding, shipbuilding, automotive production, pressure vessel work, and other high-output welding operations. Pulsed MIG for Precision & ControlThe pulsed MIG function of the Master M 355G enables welders to precisely control heat input, reduce spatter, and achieve superior bead aesthetics, particularly on thin or heat-sensitive materials. Pulsing allows rapid transitions between peak and background currents, resulting in stable arcs and smooth metal transfer across a wide range of applications — from mild steel and stainless steel to aluminium alloys. Water-Cooled Capability for Continuous PerformanceEquipped with an efficient water-cooling system, the Master M 355G is designed to maintain optimal operating temperatures during long, high-duty-cycle welding. This cooling architecture enhances performance and extends component life under heavy industrial use — a crucial advantage over air-cooled units in production environments where welding cycles are frequent and uninterrupted. Synergic Control for Effortless SetupKemppi’s synergic control technology automatically adjusts voltage and wire feed parameters based on the selected consumable, material type, and thickness. This simplifies setup, reduces guesswork, and delivers consistent results — so operators spend less time configuring machines and more time welding. Industrial Strength & FlexibilityWith a powerful 350 A output and rugged build quality, the Master M 355G Pulse handles thick-plate welding while still offering refined control on thinner sections. Its modular design and multiple interface options — including remote control panels and advanced MIG guns — help integrate the unit seamlessly into production workflows. Key Features: 350 A output, 415 V three-phase supply for heavy-duty industrial welding Pulsed MIG technology for reduced spatter and precise heat control Water-cooled system for extended duty cycles and component longevity Synergic control for automatic parameter optimisation Superior arc stability with excellent bead quality Supports steel, stainless steel, and aluminium welding Advanced control interfaces & remote options Rugged industrial construction for continuous production use Ideal For: Heavy fabrication and structural steelwork Automotive, shipbuilding, and transportation manufacturing Pressure vessel and structural component welding High-volume production environments require precise control Kit Includes: Kemppi Master M 355G MIG Welder Kemppi Master M Water Cooler Kemppi Flexlite GXe 305W5 - 5m Water-cooled MIG welding torch The Kemppi Master M 355G Pulse combines cutting-edge welding technology with industrial workload durability — offering a high-productivity solution for professional welders and fabrication specialists who demand consistent performance and precision.

Starparts Gas Nut 3/8" BSP Left Hand Thread

Gas Nut – 3/8″ BSP Left Hand Thread This precision‑made 3/8″ BSP left hand thread gas nut is a reliable and essential component for welding gas delivery systems that require left‑handed connections. Designed for secure sealing and robust performance, it ensures gas‑tight joints between regulators, hoses and fittings in professional welding environments. Key Features & Benefits 3/8″ BSP left hand thread — standard left‑handed thread for applications that require reverse threading Precision machined — ensures accurate fit and reliable gas‑tight sealing Durable construction — engineered to withstand workshop conditions and repeated use Versatile use — ideal for TIG, MIG and gas‑shielded welding applications Applications Perfect for gas system installations or repairs where a left‑hand threaded gas connection is specified, such as on certain regulators, valves and welding equipment. Compatibility Fits gas fittings, regulators, valves and accessories with a 3/8″ BSP left hand threaded port, ensuring a secure and leak‑free connection.

Norton Abrasives Norton Rapid Blend Grey Unified Disc 115MM (4-1.2")

Norton Rapid Blend Grey Unified Disc – 115 mm (4-1/2") The Norton Rapid Blend Grey Unified Disc is designed for efficient surface conditioning, blending and finishing across a wide range of metalworking applications. Combining consistent performance with excellent control, this disc is ideal for achieving uniform surface finishes while maintaining the integrity of the workpiece. Key Features & Benefits Grey medium-grade disc for controlled blending and finishing Delivers a consistent, uniform surface finish Minimises material removal while smoothing welds and edges Reduced loading for longer disc life and reliable performance Applications Weld blending and edge breaking Surface preparation prior to painting or coating Removal of light oxidation, discolouration and surface imperfections Cleaning and finishing of metal surfaces Material Suitability Stainless steel Mild and carbon steel Aluminium and non-ferrous metals Design & Performance Manufactured using Norton’s high-quality non-woven abrasive technology, the Rapid Blend Unified Disc conforms easily to the work surface, allowing smooth operation and excellent control. The disc runs cool, reducing heat build-up and helping to prevent surface discolouration—particularly important when working on stainless steel. Dimensions Diameter: 115 mm (4-1/2") Mounting: Unified disc format for quick and secure attachment Machine Compatibility Suitable for use on standard angle grinders

Rhodius Vision Cool See Through Flap Disc 115MM(4-1/2")

Zircon Flap Disc – VISION COOL The RHODIUS VISION COOL zircon flap disc sets new standards in grinding performance and visibility. Its innovative three cut-out design creates a transparent effect during rotation, allowing continuous monitoring of the grinding process without interrupting work. Key Benefits Clear, unobstructed view of the workpiece while grinding Precise and controlled material removal Cool grinding action that significantly reduces heat discolouration Machine Compatibility Designed for use on freehand angle grinders across all performance classes. Material Suitability Specifically engineered for demanding applications on: Stainless steel (e.g. V2A, 1.4301) Carbon and structural steels (St37, S235JR, 1.0037) Cast steels The VISION COOL delivers consistently aggressive stock removal combined with an exceptionally long service life. Design & Manufacturing Manufactured in accordance with EN 13743 and safety-tested to oSa standards, this flap disc features: A durable fibreglass backing pad for high contact pressure High-quality zirconium abrasive grain for superior cutting performance Iron- and sulphur-free construction, suitable for stainless steel applications Conical 10° flap arrangement for improved ergonomics and easier handling Performance & Quality As part of the RHODIUS TOPline range, the VISION COOL represents the highest level of quality and performance in its class. Applications The special top-size coating ensures cooler grinding, minimising thermal stress and reducing tarnish colours—particularly important when working on stainless steel or painted surfaces. This results in less rework and higher productivity. The unique cut-out design allows users to clearly see how much material is being removed, improving precision and control throughout the grinding process. Dimensions & Grits Available diameters: 115 mm 125 mm Available FEPA grit sizes:   40 60 80

Starparts MB501 Style MIG Torch Shroud

MB501 Style MIG Torch Shroud The MB501 Style MIG Torch Shroud is a durable, high-quality consumable designed to protect the MIG torch and ensure optimal shielding gas coverage during welding. Manufactured from robust, heat-resistant materials, this shroud helps maintain consistent arc performance and reduces spatter, improving overall weld quality. Compatible with MB501 style MIG torches, it is ideal for professional fabricators, maintenance technicians, and workshop use. The shroud’s design ensures a secure fit and long-lasting performance, even under demanding welding conditions. Key Features: Precision-engineered shroud for MB501 style MIG torches Protects the torch and ensures consistent gas coverage Improves arc stability and reduces spatter Durable, heat-resistant construction for long service life Suitable for industrial, workshop, and fabrication applications Typical Applications: MIG Welding | Fabrication | Maintenance | Workshop Use | Industrial Welding Type: MIG Torch Shroud Compatibility: MB501 Style MIG Torches

Starparts WP20 Rigid Head Water Cooled Replacement TIG Torch Body

WP20 Rigid Head Water-Cooled Replacement TIG Torch Body The Starparts WP20 Rigid Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a rigid head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20 Rigid Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20? Designed for welders who demand high performance and flexibility, the WP20 delivers control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

Starparts WP20FX Flexi Head Water Cooled Replacement TIG Torch Body

WP20FX Flexi Head Water-Cooled Replacement TIG Torch Body The Starparts WP20FX Flexi Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a flexible head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Flexible Head – Adjusts effortlessly for improved torch positioning in confined or awkward areas. Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20FX Flexi Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20FX? Designed for welders who demand high performance and flexibility, the WP20FX delivers precise control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

Abicor Binzel FEX PRO Portable Fume Extraction Unit 110/230V Auto Voltage

Abicor Binzel FEX PRO Portable Fume Extractor – Dual Voltage 110/230V Product Overview: The FEX PRO by Abicor Binzel is a compact and powerful portable welding fume extractor designed to improve workplace air quality in a wide range of welding environments. With dual-voltage capability (110V/230V), the FEX PRO provides flexibility across sites, workshops, or mobile operations. It’s ideal for use with fume extraction torches and compatible nozzle setups for efficient source-capture ventilation. Key Features: Dual Voltage Operation (110V / 230V): Easily switch between standard site power (110V) and mains (230V) with plug-and-play adaptability. Ideal for contractors, workshops, and on-site jobs with varied power supply. Compact & Mobile Design: Lightweight with integrated handles for easy transport between job sites or work areas. Stable base and optional trolley for added mobility. High-Efficiency Filtration System: Multi-stage filter setup including: Pre-filter for coarse particles Main filter for fine dust HEPA-class final filter (H13) for welding fumes and sub-micron particles Filter monitoring and alert indicators included. Quiet and Efficient Operation: Designed for noise-sensitive environments. Maintains high airflow while operating at lower decibels than larger systems. Torch Integration Capable: Compatible with Abicor Binzel fume extraction torches such as the xFume® MIG and external capture devices like the fishtail nozzle (LS854000). Technical Specifications: SpecificationValue Input Voltage Dual: 110V / 230V, 50–60 Hz Power Rating ~1.1 – 1.5 kW Max Airflow Up to ~260 m³/h Vacuum Pressure ~20,000 Pa Filtration Efficiency ≥ 99.95% (HEPA H13 standard) Filter Type Multi-stage (Pre + Main + HEPA) Noise Level ~70–72 dB(A) Dimensions Approx. 600 x 400 x 800 mm Weight ~35–40 kg Hose Diameter Compatibility Typically 50 mm Applications: MIG/MAG, TIG, and Stick welding environments Use in confined spaces, site welding jobs, or mobile setups Ideal for stainless steel, galvanized steel, aluminum, and mild steel Supports compliance with fume safety regulations in small- to medium-scale operations   What’s Included:   FEX PRO Portable Unit – Dual Voltage Integrated filter pack Power cable with voltage selector/adapters Operating manual

Abicor Binzel Fishtail Fume Extraction Nozzle With Magnetic Stand

Abicor Binzel Fishtail Fume Extraction Nozzle with Magnetic Stand Part Number: LS854000 Product Overview: The Fishtail Fume Extraction Nozzle by Abicor Binzel is a high-efficiency external extraction accessory designed for use in welding environments where direct torch-integrated extraction isn't feasible. Featuring a wide fishtail-shaped intake and a powerful magnetic base, this nozzle offers optimal capture of welding fumes while maintaining flexibility and ease of use on ferrous surfaces. Key Features: Fishtail Design: The broad, flat intake design increases the capture area, enabling efficient extraction over a wide welding zone. Ideal for covering longer weld seams or areas with variable torch angles. Magnetic Stand Base: Strong magnet allows secure positioning on steel workpieces, tables, or fixtures. Adjustable nozzle positioning for optimal fume capture, even in overhead or vertical welding setups. Flexible Hose Connection: Connects to standard fume extraction units via hose adapters (typically 45 mm or 50 mm ID). Compatible with the xFume® Advanced, FES-200, or similar portable extraction systems. Durable Construction: Made from heat- and spark-resistant materials to withstand harsh industrial environments. Suitable for both light and heavy-duty welding tasks. Technical Specifications: SpecificationValue Nozzle Width ~200–250 mm (fishtail opening) Hose Connection Diameter Typically 50 mm (check unit fit) Material Metal nozzle + industrial magnet Mounting Magnetic base (adjustable angle) Weight ~1.5–2.0 kg Operating Temp Heat-resistant up to 200–250°C Applications: MIG/MAG and TIG welding on steel and stainless steel Workshop and fabrication bay setups with fixed extraction units Ideal for situations where torch-integrated fume extraction isn't suitable Repetitive or production-line welding on large components   Compatibility: Works with: Abicor Binzel xFume® Advanced FES-200 Most industrial extraction units with 45–50 mm inlet ports

Abicor Binzel Xfume Advanced Extractor 230V Package

Abicor Binzel xFume® Advanced Extraction Package – 230V Part Number: 601.0192.1 Product Overview: The Abicor Binzel xFume Advanced is a high-efficiency fume extraction system designed specifically for welding applications. This 230V unit is ideal for workshops, fabrication shops, and industrial environments where welding fume management is a priority. It integrates seamlessly with fume extraction MIG torches and other compatible systems to ensure the health and safety of welding operators. Key Features: High-Performance Extraction: The xFume Advanced uses a powerful turbine motor to deliver high airflow and static pressure, ensuring effective extraction directly at the source. Suitable for capturing welding fumes from manual welding processes, especially MIG/MAG and TIG. 3-Stage Filtration System: Includes a pre-filter, main filter, and activated carbon filter, offering up to 99.95% efficiency on particles down to 0.3 microns. HEPA-grade filtration ensures compliance with occupational safety regulations (such as W3 classification for stainless steel welding). Automatic Start/Stop: Optional signal integration with welding torches allows the unit to activate automatically when welding begins, conserving energy and prolonging filter life. Compact & Mobile: Rugged housing with castor wheels for mobility. Compact footprint ideal for use in tight workshop environments. Low Operating Noise: Operates quietly compared to comparable high-capacity systems, improving operator comfort. Technical Specifications: SpecificationValue Input Voltage 230V / 1-phase / 50–60 Hz Power Consumption Approx. 1.1 – 1.5 kW Max Airflow ~260 m³/h (varies by setup) Max Vacuum ~20,000 Pa Filtration Efficiency ≥ 99.95% (HEPA class H13) Noise Level ~70 dB(A) Filter Cleaning Manual or semi-automatic Dimensions (LxWxH) Approx. 600 x 400 x 900 mm Weight Approx. 35–40 kg Applications: Light to medium-duty welding fume extraction Stainless steel, aluminum, and mild steel MIG/MAG welding Ideal for workshops seeking a portable yet powerful extraction solution Designed for use with fume extraction MIG torches such as the xFume® MIG or FES-200 torch systems Included in the Package: xFume Advanced Extraction Unit – 230V (Part No. 601.0192.1) 2 x Pre-installed filter cartridges Automatic start-stop lead 1.5mtr Power cable and mobility kit (wheels and handle) User manual and setup instructions dust collection bags    

Weltek Navitek Navitek Airkos/Airkem Replacement HD 6 Cell Lithium Battery

Airkos / Airkem 6-Cell Lithium-Ion Battery (Heavy Duty) Extended Runtime Battery for Airkos & Airkem Powered Respiratory Systems The Airkos / Airkem 6-Cell Lithium-Ion Battery (Heavy Duty) is a high-capacity power source designed to deliver extended operating time for Airkos and Airkem PAPR (Powered Air Purifying Respirator) systems. Ideal for long shifts, high-demand environments, or users requiring increased airflow settings, this heavy-duty battery ensures continuous respiratory protection without the need for mid-shift charging or battery swaps. Manufactured to the highest safety and performance standards, this battery is the perfect upgrade or replacement for professionals working in demanding industrial settings. Key Features Extended Runtime Performance Provides up to 12 hours of continuous operation under standard conditions—ideal for double shifts, extended welding tasks, or high particulate environments where filters create greater airflow resistance. High-Capacity Lithium-Ion Technology Utilising advanced 6-cell lithium-ion technology, this battery delivers reliable, stable power output with excellent energy density and minimal weight increase compared to standard versions. Compatible with Airkos & Airkem Systems Fully compatible with all Airkos and Airkem blower units and charging stations. Can be used as a direct upgrade from the standard 4-cell battery without the need for additional hardware. Fast Recharge Capability Despite its larger capacity, the 6-cell battery can be recharged in approximately 6–8 hours using the official Airkos / Airkem charger—ideal for overnight charging between shifts. Built-In Safety Protections Features internal circuitry for overcharge, over-discharge, over-temperature, and short-circuit protection. Ensures safe, consistent performance in high-risk work environments. Durable & Lightweight Design Encased in a robust, impact-resistant housing that withstands workshop abuse, this battery remains lightweight and comfortable for all-day wear when belt-mounted with the blower unit. Technical Specifications Battery Type: Lithium-ion (Li-ion) Cell Configuration: 6-cell Voltage: 14.8V Capacity: Approx. 4.4Ah – 5.2Ah (model-dependent) Runtime: Up to 12 hours (usage dependent) Charging Time: 6–8 hours (with genuine charger) Weight: Approx. 600–700g Compatibility: Airkos & Airkem PAPR systems (standard and high-performance configurations) Certifications: CE marked, EN-approved for use with compatible PPE systems Applications Extended-shift industrial welding Metal grinding and cutting operations High-dust or high-filtration environments Cleanrooms and pharmaceutical processing Food industry and chemical handling Anywhere longer battery life is critical for uninterrupted respiratory protection Why Choose the 6-Cell Heavy Duty Battery? If you need maximum uptime, minimal interruption, and consistent performance from your powered air respirator system, this heavy-duty 6-cell battery is the perfect solution. It’s a popular choice for high-risk industries where safety and endurance can’t be compromised. Order Now for Immediate Dispatch In stock and ready for same-day shipping. Bulk orders and full respiratory system packages available. Contact our team for trade pricing or to discuss your Airkos / Airkem system requirements.

Weltek Navitek Navitek Airkos/Airkem Replacement Battery Charger

Airkos / Airkem Blower Unit Charger Genuine Charging Solution for Airkos & Airkem PAPR Systems The Airkos / Airkem Blower Unit Charger is the official charging device designed specifically for use with Airkos and Airkem powered air purifying respirators (PAPR). Engineered for safety, reliability, and ease of use, it ensures that your respiratory system is always ready for the next shift. This intelligent charger provides consistent and efficient recharging for standard and extended-run lithium-ion batteries used in Airkos and Airkem blower units, making it an essential component of your respiratory protection system. Key Features Fast, Intelligent Charging Automatically detects battery condition and delivers the correct charge rate to ensure fast and safe recharging. Typically charges a standard 4-cell battery within 3–4 hours. LED Charging Status Indicators Equipped with clear LED indicators to show real-time charging status—charging, fully charged, or fault detection—so users can quickly confirm battery readiness. Safe and Efficient Operation Built-in safety protections guard against overcharging, overheating, short circuits, and voltage irregularities. Designed to prolong battery lifespan and ensure user safety. Compact and Rugged Design The charger’s compact footprint makes it ideal for benchtop use, storage lockers, or mobile setups. Its durable construction is suitable for workshop, laboratory, and industrial environments. Universal Compatibility Works with both standard and high-capacity Airkos / Airkem lithium-ion batteries. Designed to integrate seamlessly into your existing respiratory PPE setup. Plug-and-Play Connection Tool-free operation allows users to dock and undock batteries quickly, reducing downtime during shift changes or recharging cycles. Technical Specifications Input Voltage: 100–240V AC (universal) Output: 16.8V DC (typical for 4-cell Li-ion) Charging Time: Standard Battery: Approx. 3–4 hours Extended Battery: Approx. 6–8 hours Indicators: LED charging status lights Compatibility: Airkos PAPR blower units Airkem PAPR blower units Both standard and extended battery variants Safety Features: Overcharge protection Thermal monitoring Short-circuit protection Automatic charge cut-off Applications Welding, grinding, and cutting operations Pharmaceutical and cleanroom environments Food production facilities Hazardous material handling Any workplace using Airkos or Airkem powered respiratory systems Why Choose the Genuine Airkos / Airkem Charger? This OEM charger is the only solution recommended by the manufacturer for safe and effective charging of Airkos and Airkem batteries. Using non-genuine alternatives can compromise battery life, unit performance, and user safety. In Stock and Ready to Ship   Maintain productivity and safety by ensuring you have enough chargers on-site for shift rotation. Available for individual purchase or bulk orders. Contact us for trade pricing or system packages.

Weltek Navitek Navitek Airkos/Airkem Replacement 4 Cell Lithium-Ion Standard Battery

  Airkos / Airkem 4-Cell Lithium-Ion Battery (Standard) Reliable Power Supply for Airkos and Airkem Powered Air Respirators The Airkos / Airkem 4-Cell Lithium-Ion Battery (Standard) is a high-performance rechargeable power unit designed specifically for use with Airkos and Airkem powered air purifying respirators (PAPR systems). Engineered for consistent runtime and long service life, this standard battery ensures your respiratory protection system operates safely and effectively across a full work shift. Key Features High-Capacity Lithium-Ion Power This 4-cell lithium-ion battery provides a stable and long-lasting power source, offering excellent energy density and minimal performance drop-off over time. Optimised for Full-Shift Operation Designed to deliver up to 8 hours of continuous runtime under standard operating conditions (actual runtime may vary based on filter type, airflow settings, and environment). Compact & Lightweight Design Despite its robust performance, the battery remains compact and low in weight, ensuring user comfort is not compromised when worn on a belt or integrated into a PAPR system. Quick & Easy Replacement Features a secure, tool-free connection system allowing fast battery replacement or swap-outs in the field. Compatible with all standard Airkos and Airkem charger bases. Rechargeable & Reusable Long service life with excellent recharge cycle stability. Can be recharged hundreds of times without significant degradation in capacity. Built-In Safety Features Includes protection against overcharging, deep discharge, overheating, and short-circuiting—ensuring safe, worry-free operation in industrial and hazardous environments. Technical Specifications Battery Type: Lithium-ion (Li-ion) Cell Configuration: 4-cell Voltage: 14.8V Capacity: Approx. 2.6Ah – 3.4Ah (depending on model variant) Runtime: Up to 8 hours (standard operating conditions) Recharge Time: Approx. 3–4 hours with compatible charger Weight: Approx. 400–500g Compatibility: For use with Airkos and Airkem PAPR systems (standard configuration) Applications Welding and grinding environments Chemical and pharmaceutical facilities Laboratories and cleanrooms Food processing plants Any workplace using Airkos or Airkem powered air respiratory protection systems Why Choose This Battery? As the standard power unit for Airkos and Airkem PAPR systems, this 4-cell lithium-ion battery offers dependable performance, user comfort, and enhanced safety. It is the ideal solution for maintaining uninterrupted respiratory protection across your workday.  

G-Tech Gas Equipment Gtech Lightweight Welding & Cutting Set In Case

Starparts G-Tech Lightweight Welding & Cutting Set Compact, Professional Oxy/Acetylene Kit for Welding, Cutting & Maintenance Work The Starparts G-Tech Lightweight Welding & Cutting Set offers a versatile and portable solution for professional gas welding and cutting applications, particularly suited for light-to-medium duty fabrication, repair, and maintenance tasks. Designed with user comfort and mobility in mind, this set features a lightweight handle, mixer, and cutting attachment, making it ideal for extended use without operator fatigue—perfect for workshop use or on-site tasks. Equipped with precision 2-gauge oxygen and acetylene regulators, reliable in-line flashback arrestors, and 6mm twin hoses with 1/4" check valves, the system ensures safe and consistent gas delivery. The set also includes a range of nozzles to cover both welding and cutting operations, along with essential accessories—all housed in a compact, organised kit. Kit Contents:

ESAB T2000 TIG Gauntlet Gloves

ESAB T2000 TIG Welding Gloves Precision Handling and Premium Protection for Professional TIG Welders The ESAB T2000 TIG Gloves are purpose-built for high-precision TIG welding applications, where dexterity, comfort, and sensitivity are critical. Engineered with professional welders in mind, these gloves offer exceptional feel and fingertip control, making them ideal for intricate welds on thin materials, stainless steel, or non-ferrous metals. Crafted from high-grade goatskin leather, the T2000 gloves provide a soft, supple feel while maintaining excellent resistance to heat, abrasion, and general wear. Goatskin is known for its fine grain and natural flexibility, which enhances the welder's tactile feedback—essential for maintaining steady torch control during long or delicate welds. The glove interior features a lightweight, unlined design to maximise touch sensitivity, allowing precise manipulation of filler wire and torch controls. The ergonomic cut and straight-thumb design promote comfort during extended welding sessions, while Kevlar® stitching ensures durability under high-heat conditions. Key Features: Premium Goatskin Leather: Soft and flexible for superior fingertip control and dexterity Unlined Interior: Enhances feel and control, perfect for fine TIG work Long Cuff Design: Provides additional forearm protection from radiant heat and spatter Ergonomic Fit: Tailored cut for reduced hand fatigue and improved torch handling Kevlar® Thread Stitching: High-temperature resistance for extended glove life Lightweight Construction: Ideal for extended wear without compromising performance Applications: TIG welding (DC and AC) Precision welding of stainless steel, aluminum, and exotic alloys Pipe and tube welding Automotive, aerospace, and stainless fabrication work Specifications: Material: Premium goatskin outer Lining: Unlined for maximum tactile sensitivity Stitching: Kevlar® thread for enhanced durability Compliance: EN 12477 (Type B), EN 388, EN 407 Sizes Available: Commonly sizes M–XL (availability may vary) The ESAB T2000 TIG Gloves are an excellent choice for welders who need reliable protection without sacrificing precision. Whether you’re on a production line or executing fine TIG work in the field, these gloves help you maintain control, comfort, and confidence.

3M Speedglas G5-03E Auto-Darkening Helmet

3M™ Speedglas™ G5-03 E Welding Helmet Advanced Eye Protection Meets Adaptive Comfort and Control The 3M™ Speedglas™ G5-03 E Welding Helmet represents the latest evolution in welding headgear, designed to meet the demanding needs of professional welders working in high-amperage and precision environments. This premium-grade helmet combines 3M’s renowned optical clarity with intelligent, user-focused innovations to deliver top-tier protection, comfort, and adaptability. At the heart of the G5-03 E is the True-View 1/1/1/1 optical class auto-darkening filter (ADF), offering exceptional clarity before, during, and after welding. The E model features a large, curved front viewing area for an enhanced field of vision and a natural, colour-balanced view—reducing eye strain and improving accuracy in tasks that require detailed control. The helmet is designed for heavy-duty welding applications such as MIG, MAG, TIG, and stick welding, and it is especially well-suited to high-amperage or long-duration jobs. With a dark shade range of 5, 8–14, along with grinding and tack welding modes, the G5-03 E allows welders to fine-tune their visibility and protection to the task at hand.  

Jasic LS-20000F Laser Welder c/w Dual Wire Feeder

LS-20000F Laser Welder c/w Dual Wire Feeder The Jasic LS-20000F Laser Welder is designed to redefine efficiency and precision in professional welding applications. With a welding speed up to 10x faster than traditional manual TIG welding, it significantly reduces project time while ensuring exceptional weld quality. The cutting-edge technology minimises spatter, porosity, and distortion, requiring little to no post-weld cleaning or rework, making it an indispensable tool for high-demand environments. Engineered for cost efficiency, the LS-20000F eliminates the need for extensive welding expertise, helping companies reduce reliance on highly experienced welders. Its robust pump source offers a remarkable lifespan of over 100,000 hours, ensuring nearly zero maintenance requirements and long-term reliability. Featuring an innovative industrial design, the LS-20000F offers ergonomic flexibility and ease of use, complete with a colour touchscreen control panel for intuitive operation and comprehensive job parameter settings. Its compact footprint enhances mobility and versatility, making it suitable for a wide range of industrial applications. Powered by a CW laser with over 40% electro-optical conversion efficiency, it outperforms traditional solid YAG lasers with 10x the energy efficiency, providing both eco-friendliness and cost savings. Backed by a 2-year warranty, the Jasic LS-20000F Laser Welder guarantees quality assurance and dependable performance for your welding needs.

Mild Steel MIG Wire ER70S-6 SG2 3GSi1 Pallet Of 72 15KG Boxes

HARD CORE SG2 (G3Si1) – Premium Mild Steel MIG Welding Wire HARD CORE SG2 is a high-quality copper-coated solid wire designed for single pass or multi-pass MIG/MAG welding of unalloyed and low-alloyed carbon-manganese steels. It delivers excellent mechanical properties even in sub-zero environments, ensuring consistent performance across a wide range of structural and industrial applications. Key Features Versatile Performance: Suitable for single and multipass welds on a wide variety of carbon-manganese steels. Sub-Zero Toughness: Maintains mechanical properties down to -40°C, making it ideal for demanding environments. Precision Layer Wound: Engineered for smooth and stable wire feeding for superior weld quality. Industrial Applications: Commonly used in boiler fabrication, shipbuilding, automotive, bridges, rail, machinery, and structural steel projects. Reliable Raw Material Source: Produced using premium virgin raw materials for consistent quality and performance. Standards & Classifications EN/ISO Standard: ISO 14341-A AWS Standard: A5.18 EN/ISO Classification: G 42 3 C1 / G 42 4 M21 3Si1 AWS Classification: ER70S-6 Typical Applications Compatible with a wide range of base materials including: Steels: S185, S235, S275, S355 (Grades A, B, D), AH32 to DH36, L210–L360, P235T1–P275T2, etc. Pipes & Tubes: L210, L240, L290, L360, L415MB, X42, X46, X52, X60, etc. Plates & Structures: P235NH, P265GH, S275J2W, S355NL, S420ML, and more (List includes illustrative, not exhaustive, grades) Welding Parameters Wire DiameterVoltage (V)Current (A) 0.8 mm 18–22 V 60–180 A 1.0 mm 18–32 V 80–300 A 1.2 mm 18–34 V 120–380 A Polarity: DC (+) Shielding Gases: EN ISO 14175 – C1, M21 Welding Positions: PA, PB, PC, PD, PE, PF, PG (all positional) Mechanical Properties (Typical) With C1 Gas: Tensile Strength: 540 N/mm² Yield Strength: 440 N/mm² Elongation: 30% Impact Strength: 70 J @ -30°C With M21 Gas: Tensile Strength: 580 N/mm² Yield Strength: 460 N/mm² Elongation: 26% Impact Strength: 90 J @ -40°C Typical Chemical Composition (%)   CSiMnPSCuCrNiMoAlVZr+Ti 0.08 0.95 1.45 ≤0.025 ≤0.025 ≤0.35 ≤0.15 ≤0.15 ≤0.15 ≤0.020 ≤0.030 ≤0.15

ESAB OK GoldRox E6013 Mild Steel Stick Welding Electrodes

ESAB OK GoldRox E6013 Mild Steel Electrodes – Reliable Performance, Clean Results The ESAB OK GoldRox E6013 is a premium-quality rutile-coated electrode designed for MMA (stick) welding on mild steel. It delivers consistent, clean welds with minimal spatter and superior usability, even on low open circuit voltage (OCV) machines. Whether you're welding on-site, in a fabrication shop, or tackling maintenance and repair tasks, GoldRox offers the versatility and reliability professionals demand. Key Features Excellent Arc Striking and Re-Ignition Smooth and dependable arc initiation, even with lower OCV machines such as smaller inverters or older transformers. This ensures fewer false starts and improved weld continuity. Stable Arc with Minimal Spatter Produces a steady arc that’s easy to control, reducing spatter and helping achieve a smooth weld bead with a clean finish — ideal for projects where appearance matters. Self-Releasing Slag The rutile covering allows for excellent slag detachability, often peeling off on its own. This reduces post-weld cleaning time, increases productivity, and improves weld quality. All-Position Welding Engineered for reliable performance in all positions — flat, horizontal, vertical, and overhead — giving you flexibility across a range of welding jobs and environments. Rutile Coating (E6013 Classification) The rutile-based flux coating enhances arc stability and bead appearance, while also reducing the likelihood of porosity and defects, making it a forgiving rod for newer welders but trusted by professionals. Operates on AC and DC Offers outstanding performance on both alternating current (AC) and direct current (DC±), making it compatible with virtually all welding power sources. Applications General fabrication and structural steelwork Sheet metal welding and thin material fabrication Maintenance and repair operations Light to medium construction work Agricultural and domestic welding projects DIY and home welding use Technical Details   Classification: SFA/AWS A5.1 E6013 Alloy Type: Carbon manganese Coating Type: Rutile Current Range: AC or DC± Typical Rod Diameters: 2.5mm, 3.2mm, 4.0mm Typical Operating Parameters: 2.5mm: 60–90 A 3.2mm: 90–130 A 4.0mm: 130–180 A Reposition Rate: ~0.7kg/h

Non Woven Scotch Roll 100MM x 10Mtrs

Non Woven Scotch Roll 100MM x 10Mtrs  Abracs Non-Woven Rolls provide consistent surface preparation. Ideal for cleaning a wide range of applications and specially designed to resist loading, prolonging product life. Tightly woven for consistent action without compromising durability. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas. Available in 3 different levels of coarseness for different applications. Coarse is Green In Colour Medium is Maroon In Colour Fine Is Grey In Colour

Weld Star Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel

Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 0.60 mm 50-100 15-20 0.80 mm 60-200 18-24 1.00 mm 80-300 18-28    Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Box Qty 0.60 mm 0.80 mm 1.00 mm 1 Kg 1 Kg 1 Kg D100 D100 D100 20 20 20 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

ArcStar 200 HBM Petrol Welder Generator Site Ready Package

  The ArcStar 200 HBM Petrol Welder is a high-performance, portable welding machine designed for professional welders who need reliability and power on the go. With its robust petrol engine and 200A welding output, this welder is perfect for outdoor and remote welding applications, delivering consistent and stable arc performance. Key Features: ✅ Powerful 200A Output: Delivers smooth and stable welding performance for a variety of applications.✅ Petrol Engine Driven: Provides independence from mains power, making it ideal for on-site and remote locations.✅ Dual Functionality: Acts as both a welder and a generator, offering added versatility on the job.✅ Durable & Portable: Built with a rugged frame and handles for easy transportation in tough environments.✅ Multi-Process Capability: Suitable for MMA (Stick) welding and compatible with a range of electrodes. Specifications: Model: ArcStar 200 HBM Welding Output: 200A Power Source: Petrol Engine Processes: MMA (Stick) Welding Portability: Compact and easy to transport The ArcStar 200 HBM Petrol Welder is the ideal solution for mobile welders, construction sites, and maintenance teams who need a reliable welding power source wherever they go.

Rigid 461 Straight Pipe Welding Vice 200MM 40220

RIDGID Pipe Welding Vices are made of durable, performance-proven material and designed to resist strain, heat and warpage during tacking. They have machined swivel nuts and pins, which together with special chain screws, give smooth and trouble-free assemby of the vice onto pipe. Capacity: 15-200mm (1/2-8in).Weight: 7.0kg.

Cibo FMCM Combi FPTX Flap Wheel 120 x 110MM x M14 Thread

Cibo FMCM Combi FPTX Flap Wheel 120 x 110MM x M14 Thread  120mm diameter and 110mm wide the combination flap brushes remove light damage and scratches and leave a fine satin finish Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm FMCM 80 leaves is the ideal wheel for blending a 240 grit satin finish

Cibo FMCMC Combi Ceramic Interleaved PTX Flap Wheel 120x110MM xM14 Thread

Unofficially re-named ‘The Ginger Ninja’ our new 60 grit ceramic cloth wheels have a surprisingly high durability and cut rate. Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal and even light scale removal on stainless steel to create a consistent grain finish. Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM. Use with Finimaster Pro machine or M14 driven satin polishing machines. Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm Cibo’s Ceramic Combi Grinding Wheels: The development of the ceramic combi wheel has created the first grinding wheel that combines an aggressive ceramic linen with a soft tex. This provides a wheel that has two functions.  Press hard and you have an aggressive wheel with a high grinding capacity.  Grind with less pressure and you can easily create a fine smooth finish with this wheel. Combining these two properties allows you to grind starting with a 2B finish through to a polished finish 220 in one go.  Furthermore, grinding with this wheel generates a much lower temperature due to the ceramic linen.  This also makes it possible to machine very thin plates without risking deformation caused by the generation of excessive heat. Applications: – Brush thin (curved) plates. – Clean up surfaces to be welded. – Remove damage or machine markings and refinish in one go. – Completely remove mill scale (cold rolled) and brush to industrial finish 220 in one go. – Prepare surfaces for paints and coatings.

Cibo FMTA Tex Cut + Polish PTX Flap Wheel 100x100x19MM Keyway

Tex flap brushes remove light damage and scratches and leave a fine satin finish FMTA Cut & Polish leaves is the ideal wheel for blending a 240 grit satin finish.CP brushes uses the high strength 3M CP material and therefore have a much longer product life than the standard tex wheels Use with Finimaster Basic machine or satin polishing machines with a 19mm keyway mounting

Starparts Argon & Inert Welding Gas Black 6MM (1/4") Hose Per Metre

The Argon & Inert Welding Gas Black 6mm (1/4") Hose is designed for carrying compatible shielding gases used in professional MIG and TIG welding applications. Featuring a 6mm (1/4") internal bore, this black gas hose is ideal for creating replacement gas lines, extending existing installations or producing custom-length welding gas hose assemblies. Suitable for argon and compatible inert shielding gases, it is a useful workshop essential for welding equipment, gas regulators, flowmeters and other compatible gas supply installations. The hose is sold and priced per metre, allowing you to order the length required for your particular installation while minimising unnecessary waste. Key Features Suitable for argon and compatible inert welding gases 6mm (1/4") internal bore Black gas hose Ideal for MIG and TIG welding applications Suitable for replacement and custom gas hose assemblies Useful for workshop and fabrication gas installations Order the length required for your application Sold per metre Typical Applications Ideal for use with compatible: MIG welding equipment TIG welding equipment Argon shielding gas systems Inert gas supply lines Welding regulators and flowmeters Workshop gas installations Specification Product Type: Welding Gas HoseSuitable Gas: Argon & Compatible Inert GasesColour: BlackBore Size: 6mm (1/4")Sold As: Per MetreTypical Application: MIG & TIG Welding Ordering Information This product is sold per metre. Simply select the quantity required to order your desired length. For example, a quantity of 5 = 5 metres of hose. Please Note: Always ensure the hose is suitable for the specific gas, pressure, fittings and equipment being used. Popular alternative to the clear nylon brainded gas hose 

Starparts Short Backcap For WP17,18 & 26 TIG Torches

The 57Y04 Short Backcap is a replacement TIG torch component designed for use with WP17, WP18 and WP26 TIG torches. Its compact design significantly reduces the overall length at the rear of the torch, making it particularly useful when TIG welding in confined or restricted spaces. The backcap works with the torch collet assembly to help secure the tungsten electrode firmly in position while also helping seal the rear of the torch head. Compared with a standard long backcap, the short design provides improved torch access when working around pipework, inside fabricated assemblies or in other areas where space behind the TIG torch is limited. Because of its compact dimensions, a shortened tungsten electrode will normally be required when using a short backcap. An inexpensive and useful spare for any TIG welding setup, the 57Y04 is ideal for professional welders, fabricators, maintenance engineers and general workshop use.  

Lessman Stainless Steel 125MM x 22.2MM Pipeline Twist Knot Wire Brush

Lessman Stainless Steel Pipeline Twist Knot Wire Brush – 125mm x 22.2mm The Lessman Stainless Steel Pipeline Twist Knot Wire Brush is a high-performance industrial brush designed for aggressive cleaning, deburring, and surface preparation of pipes, tubes, and other cylindrical surfaces. Its twist knot construction provides maximum stiffness and durability, making it ideal for heavy-duty metalworking and pipeline maintenance. Measuring 125mm in diameter with a 22.2mm bore, this brush fits most standard bench grinders and hand-held rotary tools. The stainless steel bristles resist corrosion and wear, delivering long-lasting performance even in demanding workshop or fabrication environments. Engineered for efficiency and safety, the Lessman twist knot wire brush is perfect for removing rust, scale, paint, and weld spatter, while maintaining the integrity of the workpiece. Key Features: 125mm diameter x 22.2mm bore – suitable for standard grinders and rotary tools Twist knot wire design – aggressive and durable for heavy-duty cleaning Stainless steel bristles – corrosion-resistant and long-lasting Ideal for pipe and tube cleaning – deburring, weld cleaning, and surface preparation High-quality construction – maintains performance in industrial and workshop environments Applications: Cleaning and deburring pipelines and tubular components Removal of rust, scale, paint, and welding residues Surface preparation before coating or welding Industrial, fabrication, and maintenance workshops This Lessmann Pipeline Brush has the following specification: Wire: Stainless SteelNumber of Knots: 40Diameter: 125mmWidth: 6mmBore: 22.2mmMax. Speed: 15,000/bpm

Lessman Steel 178MM x 22.2MM Pipeline Twist Knot Wire Wheel

Lessmann Pipeline Brushes are specially developed for professional use on U and V-welds in the pipeline industry. These high-quality Lessmann brushes have a long lifetime and are quiet when running. They are especially narrow and therefore they are the perfect tool for cleaning all welds at tube connections. This Lessmann Pipeline Brush has the following specification: Wire: SteelNumber of Knots: 48Diameter: 178mmWidth: 6mmBore: 22.2mmMax. Speed: 12,500/bpm

Cibo Actirox Steel 115MM (4-1/2") Ceramic Fibre Disc

The Cibo Actirox Steel 115mm (4-1/2") Ceramic Fibre Disc is a high-performance abrasive designed for aggressive grinding, weld removal and rapid stock removal on steel. Featuring advanced ceramic abrasive grain, the Actirox fibre disc provides a powerful cutting action for demanding metalworking applications. The ceramic grain is designed to continually expose fresh cutting edges during use, helping maintain a fast and consistent cut throughout the working life of the disc. The 115mm (4-1/2") diameter makes it ideal for use with compatible angle grinders, providing excellent control when grinding welds, preparing edges and removing excess material from fabricated steel components. For professional fabrication and engineering environments where productivity is important, the Cibo Actirox offers an effective alternative to conventional grinding abrasives, combining high material removal rates with excellent cutting performance. Key Features Genuine Cibo Actirox abrasive Specifically designed for steel High-performance ceramic abrasive grain 115mm (4-1/2") diameter Aggressive stock removal Excellent weld grinding performance Fast and consistent cutting action Ideal for demanding fabrication work Suitable for edge preparation and deburring Excellent for professional engineering and metalworking Available in various grit sizes where applicable Typical Applications Ideal for: Grinding steel Weld seam removal Weld dressing and blending Heavy stock removal Edge preparation Deburring fabricated components Removing excess weld material Surface preparation General fabrication Engineering and metalworking Specification Brand: CiboRange: ActiroxProduct Type: Ceramic Fibre DiscDiameter: 115mm (4-1/2")Abrasive Grain: CeramicPrimary Material: SteelApplication: Grinding & Stock RemovalMachine Type: Compatible Angle GrinderAvailable Grits: Various, depending on selected option Why Choose a Ceramic Fibre Disc? Ceramic abrasive grain is particularly suited to demanding metal grinding because it maintains an aggressive cutting action as the abrasive wears. This can provide faster material removal and improved productivity compared with conventional abrasive grains in suitable applications. The fibre-backed construction provides the support required for controlled, aggressive grinding when used with a suitable backing pad. The Cibo Actirox Steel 115mm Ceramic Fibre Disc is an excellent choice for professional fabricators looking for a fast-cutting abrasive for weld removal, steel grinding and heavy-duty stock removal. Please Note: Fibre discs must be used with a suitable backing pad. Always ensure the disc, backing pad and angle grinder are compatible and that the maximum permitted operating speed is not exceeded.

Starparts Hard Core HC300 & HC400 M8 MIG Contact Tip

Hard Core HC300 & HC400 M8 MIG Contact Tip The Hard Core HC300 & HC400 M8 MIG Contact Tip is a high-quality replacement consumable designed to deliver reliable current transfer, smooth wire feeding and consistent welding performance. Precision-manufactured for compatibility with Hard Core HC300 and HC400 MIG welding torches, this M8 threaded contact tip ensures excellent electrical conductivity and helps maintain a stable, consistent welding arc. Manufactured from premium copper alloy for superior conductivity and wear resistance, the contact tip is engineered to withstand the demands of professional fabrication, manufacturing and industrial welding applications. Its precision-machined bore promotes accurate wire alignment, reducing friction and helping to minimise wire feeding issues for improved weld quality and increased productivity. Regular replacement of contact tips is essential for maintaining optimum torch performance, reducing downtime and extending the life of other welding consumables. Features & Benefits High-quality replacement M8 MIG contact tip. Designed for Hard Core HC300 and HC400 MIG welding torches. Provides excellent electrical conductivity for consistent arc performance. Precision-machined bore for smooth and accurate wire feeding. Manufactured from premium copper alloy for durability and long service life. Helps reduce wire feed interruptions and improve weld quality. Quick and easy to replace during routine torch maintenance. Ideal for fabrication, manufacturing, maintenance and industrial welding applications. Ideal Applications MIG/MAG welding General fabrication Structural steelwork Manufacturing Maintenance and repair Production welding Engineering workshops Keep your welding torch performing at its best with the Hard Core HC300 & HC400 M8 MIG Contact Tip, delivering dependable current transfer, smooth wire feeding and consistent welding results for professional applications.  

Hypertherm Powermax 125 Plasma Cutter With 7.6Mtr Hand Torch

Hypertherm’s Powermax 125 plasma system delivers maximum power and performance to provide thick metal cuts. Able to make short work of the toughest of cutting and gouging applications, this plasma unit offers a 100% duty cycle, a 25mm (1”) mechanised pierce capability, and fast gouging metal removal. The Powermax 125 provides the latest technological innovation, such as the Smart Sense function, which automatically adjusts gas pressure. The Duramax torches are available in various styles, operators can select the ideal tool for the job. Options include hand cutting or gouging, portable automation, X-Y table and robotic cutting or gouging.

Weld Star Weldstar ER316L Stainless Steel MIG Wire 5KG 200MM Reel

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. The presence of molybdenum provides creep resistance in a halide atmosphere. ER 316LSi is slightly magnetic and offers good corrosion resistance. Ideal for welding low-carbon molybdenum-bearing austenitic alloys, including joining and surfacing of stainless steels type 316, 316L and 316Ti. High temperature resistance up to 400°C. Precision layer wound for superior wire feeding characteristics. Typically used on applications where good corrosion resistance is required, such as in acid media a/o in chlorinated solutions, hot water tanks, architectural and roofing, food processing and chemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials All 300 series austenitic stainless steel, particularly 316 and 316L* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 12 3 L Si AWS A5.9 - ER 316LSi  

Starparts Gtech Propane Regulator Single Stage Plugged 25Bar

Starparts Gtech Propane Regulator – Single Stage Plugged 25 Bar The Starparts Gtech Propane Regulator is a high-quality, single-stage regulator designed to provide consistent and safe gas delivery for propane-based welding, cutting, and heating applications. Engineered for durability and reliability, it ensures stable pressure and efficient gas flow under demanding conditions. With a 25 Bar pressure rating and a robust, plugged design, this regulator is suitable for a wide range of industrial and workshop equipment. Its durable construction ensures long-term performance and safe operation, making it ideal for professional users requiring precision gas control. Key Features: Single-stage propane gas regulator 25 Bar maximum pressure for consistent gas delivery Robust plugged design for reliable operation Durable construction for long-lasting use Suitable for welding, cutting, and heating applications Typical Applications: Propane Gas Welding | Oxy-Fuel Cutting | Heating | Industrial Workshop Use   Brand: Starparts Type: Propane Gas Regulator Model: Gtech Single Stage Plugged 25 Bar

Tecna 2KvA Handheld Spot Welder C/W Timer 230V

Hand Operated Spot Gun 2 kVA Key Features • Lightweight professional spot gun for car body repair • Synchronous built-in electronic timer with SCR from 2 to 65 cycles • Compensation circuit starts the timer only when there is a proper passage of current which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets • All transformer are coated with F class insulation material that does not dry out and become brittle • Tests are made using 4000V • Force adjustment with scale in daN • Additional arm couplings to provide larger opening between arms • Supplied complete with 125mm arms • Large choice of arms and electrodes

Right Lines 6 Piece Welders Magnet Set

Right Lines Magnetic Set The welding magnets replace a third hand, help with simple, precise attachment and positioning, make welding work particularly convenient and clean. Contains 2 x 90 ° & 45° magnets with a lifting capacity weight of 11.KG 2 x 135° - 120° - 105° magnets with a lifting capacity weight of 11.KG 2 x 90° - 45° - 135° magnets with a lifting capacity weight of 4 KG This kit includes six powerful magnets that are perfect for your daily work needs. The magnets have a strong suction that allows you to work hands-free, making it fast, safe, and easy to clean. The angled design of the magnets can hold the blade and tube at 45°, 90°, 105°, 120° and 135° angles. The compact and small appearance of the magnets makes them easy to hold and store. These magnets are suitable for welding, marking, bracing, and positioning in pipe installation, among other scenarios.  

Weldturn NHTR-1000 Pipe Rotators

Weldturn NHTR-1000 Pipe Rotators 1-Tonne Conventional Pipe Rotator for Precision Welding Applications The Weldturn NHTR-1000 is a robust and compact set of conventional pipe rotators designed to rotate cylindrical workpieces—such as pipes, tanks, or pressure vessels—during fabrication and welding. With a load capacity of 1,000 kg (1 tonne), it offers smooth, consistent rotation and is ideal for light to medium-duty applications in workshops, fabrication shops, and on-site environments. This unit is part of Weldturn's reliable NHTR series, engineered for durability, safety, and ease of use in demanding industrial settings. Key Features 1-Tonne Load Capacity Capable of handling workpieces up to 1,000 kg in total weight (combined load across drive and idler units), making it ideal for small to medium-sized pipework and vessel sections. Conventional Wheel Adjustment Manual wheel spacing adjustment allows the operator to accommodate various pipe diameters quickly and securely. Suitable for a wide range of cylindrical components. Rubber-Tyred Wheels High-quality rubber-coated drive and idler wheels provide excellent grip, shock absorption, and reduced risk of surface damage to the workpiece during rotation. Variable Speed Control Equipped with a variable frequency drive (VFD) to offer adjustable rotation speed, ensuring optimal control during welding, surfacing, or inspection tasks. Durable Steel Construction Built from heavy-duty steel with a powder-coated finish for enhanced corrosion resistance and long service life, even in harsh working environments. Remote Pendant Control (Optional) Optional wired pendant control available for easy operator access to start/stop and speed adjustments, ensuring better process control and operator safety. Technical Specifications Model: NHTR-1000 Load Capacity: 1,000 kg (500 kg per unit) Pipe Diameter Range: Typically 100–1,000 mm* Wheel Type: Rubber-coated rollers Speed Range: Variable (VFD controlled) Power Supply: 230V or 400V, 50/60Hz (depending on configuration) Control Method: Manual controls; optional remote pendant Construction: Powder-coated steel frame Drive Unit: 1 × powered rotator Idler Unit: 1 × free-rotating support Weight (Set): Approx. 100–150 kg *Specifications may vary depending on configuration and manufacturer options. Applications Pipe and pressure vessel fabrication Tank welding and assembly Cladding and hardfacing Non-destructive testing (NDT) Rotary welding automation systems Why Choose the Weldturn NHTR-1000? Whether you're looking to improve weld consistency, reduce operator fatigue, or enhance safety during fabrication, the NHTR-1000 delivers exceptional performance in a compact, cost-effective footprint. It’s a trusted solution for workshops handling light-to-mid weight rotating applications. In Stock & Available for Immediate Delivery Supplied as a full set (1× drive + 1× idler). Optional accessories and remote controls available. For custom setups, automation packages, or bulk orders, contact our technical sales team. Technical Specification Turning Capacity – 1000kg Load Capacity – 1000kg Diameter Range – 020-700mm Control – Foot Pedal Height – 390mm Width – 470mm Length – 520mm Rotational Speed:  200 – 1500 mm/min

Rotabroach SITEH3ro Ultimate Metric Kit 15 Pieces

The SITEH3RO Ultimate Kit is the ideal solution for all common handheld metalworking projects, including; taps, step reamers, car reamers and step drills in a range of common sizes.    Designed with our specialist SITEH3RO coating, these tools are tested to provide 75% better life than uncoated tools due to a reduction in heat generation during cutting. Includes: 3 Step Drills (4-12mm, 4-20mm, 4-30mm), 3 Step Reamers (8-16mm, 14-22mm, 20-28mm), 4 Taps (M6, M8, M10, M12), 3 Car Reamers (14mm, 18mm, 22mm) and 2 SITEH3RO Holders (1/2" and 3/4").   Key Features:  Make NEW HOLES with Step Drills & Step Reamers. EXPAND HOLES with Step Drills and Step & Car Reamers. ALIGN HOLES with Car Reamers. 75% Longer life with SITEH3RO coating.   Kit Includes: 3 Step Drills 4-12mm / 4-20mm /4-30mm3 Step Reamers 8-16mm / 14-22mm /20-28mm3 Taps M6, M8 , M10 & M124 Car Reamers 14mm / 18mm &22mm3 Holders 1/2" & 3/4" 2

Rotabroach SITEH3RO 3/4" Drive Impact Wrench Adaptor

Turn your impact wrench into a multipurpose metalworking machine with SITEH3RO™; our holders are designed for use with the specialist SiteH3ro range of cutting tools, allowing your handheld tool to use step drills, step reamers, car reamers and taps. Features Allows the use of our entire SITEH3RO™ cutting tools range with any suitable impact wrench.Suitable for use with 3/4" impact wrenches (holder dependent). Fits Impact Wrench Drive -  Size - 3/4"

Weld Star Weldstar A32 ER0S-B2 Low Alloy TIG Filler Wire 5KG

Features and Applications Low alloy copper coated wire with 1.25% Cr and 1% Mo content used for the welding of heat-resistant steels. Suitable for welding 0.9% Cr and 0.5% Mo steels. Designed for high temperature power generation applications. Recommended working temperatures of up to 550°C. Typically used on equipment for the chemical and ammonia synthesis process, heat exchangers, boilers, pipes, pressure vessels, petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials 13CrMo4-5, G17CrMo55, A387:2,11,12, A200: T11, T12, GS 25CrMo4, GS 18CrMo910, 10CrMo910, 10CrSiMoV7, 10CrV63, 12CrSiMo8** Illustrative, not exhaustive list   Standards EN ISO 21952-B - 1CM AWS A5.28 - ER 80S-B2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.55 0.60 <0.012 <0.015 <0.25             Cr% Ni% Mo% Al% V% Fx ppm 1.30 <0.20 0.50 <0.020 <0.010 <15

Starparts Gas Hose Tail 3/8" BSP Nut To 1/4" Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 1/4″ Hosetail This high‑quality gas hose tail adaptor provides a secure connection from a 3/8″ BSP female threaded gas fitting to a 1/4″ hosetail — ideal for welding gas systems requiring step‑down connections. Precision machined for reliable sealing and durability, it’s a versatile and essential component for professional gas‑shielded welding setups. Key Features & Benefits 3/8″ BSP nut to 1/4″ hosetail — standard sizing for smooth transition between threaded fittings and hose Leak‑resistant connection — precision threads and hosetail profile ensure tight sealing Rugged construction — built to withstand workshop environments and repeated use Multi‑application — suitable for TIG, MIG, plasma and general gas delivery systems Applications Used to connect gas hoses to regulators, gas mixers, welding machines or other components where a 3/8″ BSP female thread must interface with a 1/4″ flexible hose. Ideal for routing gas lines in tight spaces or where hose reductions are needed. Compatibility Fits welding gas systems and accessories that use standard 3/8″ BSP threaded gas ports and 1/4″ internal diameter gas hose.

Starparts Gas Hose Tail 3/8" BSP Nut To 3/8" BSP Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 3/8″ BSP Hosetail This robust 3/8″ BSP nut to 3/8″ BSP hosetail gas hose tail provides a secure and reliable connection between gas hoses and fittings in welding and gas delivery systems. Precision‑manufactured for tight sealing and long‑lasting performance, it’s an essential component for professional TIG, MIG and gas welding setups. Key Features & Benefits 3/8″ BSP nut to 3/8″ BSP hosetail — standard sizing for compatibility with most welding gas hoses and fittings Secure fit — precision machining ensures a tight, leak‑resistant connection Durable construction — built to withstand workshop conditions and repeated use Versatile application — ideal for connecting regulators, gas lines and welding equipment Applications Perfect for linking gas hoses to regulators, gas mixers, welding machines or other gas system components where a 3/8″ BSP connection and hosetail fitting are required.   Compatibility Suitable for use in TIG, MIG and other gas‑shielded welding applications that utilise 3/8″ BSP threaded connections and flexible gas hoses

Starparts Gas Nut 3/8" BSP Right Hand Thread

Gas Nut – 3/8″ BSP Right Hand Thread Ensure a secure and leak-free connection in your welding gas delivery system with this high-quality 3/8″ BSP right hand thread gas nut. Precision machined for consistent fitment and durability, it’s an essential consumable for any TIG, MIG or gas welding setup. Key Features & Benefits Standard 3/8″ BSP right hand thread – compatible with a wide range of regulators, hoses and fittings Precision machined – ensures reliable, tight sealing to prevent gas leaks Durable construction – designed to withstand workshop environments and repeated assembly Versatile use – suitable for TIG, MIG and other gas-shielded welding applications Applications Used to secure and seal gas line connections on welding machines, regulators, gas hoses and accessories where a 3/8″ BSP right hand thread is required. Compatibility Fits any 3/8″ BSP right hand threaded gas port or fitting commonly found on welding equipment and gas system components.

Starparts Propane Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Propane Gas Hose 10mm (3/8") is a robust gas hose designed for use with compatible oxy-propane cutting, heating and brazing equipment in professional workshop, fabrication and industrial environments. Featuring a 10mm (3/8") bore, the hose is supplied complete with check valves and 3/8" fittings, providing a convenient solution for replacing worn or damaged hoses or setting up compatible oxy-fuel equipment. The incorporated check valves help prevent reverse gas flow within the system, providing an important additional safety feature. The larger 10mm bore is particularly suited to applications requiring increased gas flow, subject to the requirements of the torch and associated equipment. Suitable for regular professional use, this propane hose is an excellent choice for fabrication shops, engineering companies, maintenance departments and other environments using propane-fuelled cutting and heating equipment. Key Features Designed for propane gas applications 10mm (3/8") bore Supplied complete with 3/8" fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-propane equipment Ideal for cutting, heating and brazing applications Suitable for professional workshop and industrial use Robust construction for regular use Typical Applications Ideal for oxy-propane cutting, pre-heating, brazing, fabrication, engineering, maintenance and repair applications where a 10mm bore propane hose is required. Specification Product Type: Propane Gas HoseGas: PropaneBore Size: 10mm (3/8")Fitting Size: 3/8"Check Valves: IncludedApplication: Cutting, Heating & Brazing Please Note: Always ensure the hose, fittings, check valves and associated gas safety equipment are compatible with the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings

The Acetylene Gas Hose 6mm (1/4") Bore is designed for use with compatible oxy-fuel welding, cutting, brazing and heating equipment, providing a reliable connection between your acetylene gas equipment and torch setup. Featuring a 6mm (1/4") internal bore, the hose is supplied complete with check valves and 1/4" fittings, providing a convenient ready-to-use solution for replacing worn hoses or setting up compatible gas welding and cutting equipment. The incorporated check valves provide an additional safety feature by helping to prevent reverse gas flow within the system. Its robust construction makes this hose suitable for regular use in professional workshops, fabrication environments, maintenance departments and engineering applications. Key Features Designed for acetylene gas applications 6mm (1/4") bore Complete with 1/4" fittings Supplied with check valves Check valves help prevent reverse gas flow Suitable for compatible oxy-fuel equipment Ideal for welding, cutting, brazing and heating applications Suitable for professional workshop and fabrication use Convenient replacement for worn or damaged acetylene hoses Typical Applications Suitable for use with compatible equipment for: Oxy-acetylene welding Gas cutting Brazing Heating Fabrication and engineering Maintenance and repair work Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 6mm (1/4")Fitting Size: 1/4"Check Valves: IncludedApplication: Oxy-Fuel Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings and safety devices are compatible with your gas equipment and operating pressures before use. Cutting & Welding Hose• All rubber hose manufactured & tested in accordance with ISO 3821: 2010• All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Fitted Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Acetylene Gas Hose 10mm (3/8") is a heavy-duty gas hose designed for use with compatible oxy-acetylene welding, cutting, brazing and heating equipment in professional workshop and industrial environments. Featuring a 10mm (3/8") bore, this hose is supplied complete with check valves and 3/8" BSP fittings, providing a convenient solution for replacing existing hoses or setting up compatible oxy-fuel equipment. The fitted check valves help prevent reverse gas flow, adding an important safety feature to the gas supply system. The larger 10mm bore makes this hose particularly suitable for applications requiring a higher gas flow, subject to the requirements of the equipment being used. Key Features Designed specifically for acetylene gas 10mm (3/8") bore Supplied with 3/8" BSP fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-acetylene equipment Ideal for welding, cutting, brazing and heating Suitable for professional workshop and industrial applications Robust construction for regular use Typical Applications Suitable for oxy-acetylene welding, gas cutting, brazing, heating, fabrication, engineering, maintenance and repair applications where a 10mm bore acetylene hose is required. Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 10mm (3/8")Fitting Size: 3/8" BSPCheck Valves: IncludedApplication: Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings, check valves and associated safety equipment are suitable for the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Tecna TE1700C Weld Analyzer

The TE1700C “WELD TESTER” is a portable instrument purposely designed for measuring the resistance welding parameters. By using different kind of probes, the same instrument enables to measure the welding current, the force at the electrodes, the voltage at the electrodes, the energy, the resistance and the thermal current. The analyzer can be set through the 5.7″ color LCD touch screen, an indispensable high performing diagnostic tool which provides a graphical display of the waveforms of the selected signals.Suitable for measuring current of AC, DC / MFDC and CDW machines   Main Features: Current measurements: RMS value, maximum positive peak and maximum negative peak. Measure of the conduction angle in degrees for AC machines. Measurement of the welding time in cycles with a 1/2 cycle resolution or in ms with a 0.1 ms resolution; maximum time of measurement 6 seconds. Voltage measurements: RMS value, maximum positive peak and maximum negative peak. Measurement of the delivered energy during the welding and of the electrical resistance value of the material. Initial and final blanking function with programmable duration to mask the slopes of the welding current. Management of the pulsations up to a maximum of 9. Measurement of the welding force: it displays the maximum and minimum average force values at the beginning and at the end of the welding time. Blanking function, it eliminates the measurement errors due to a high impact strength and allows its analysis. Storage of measurements (30.000 max), statistical analysis and the details of the last 100 measurements available directly on the instrument. Management of 16 different limit masks recallable trough external inputs, the result of the limit evaluation is available through an outward output (WELD MONITOR). Limits on the measurement selectable among time, current, power and strength. Ethernet and Wi-Fi interfaces for the instrument configuration and for the measurements visualization through smartphone/tablet or PC. USB 2.0 output for memory stick use for storing data and waveforms (bitmap and csv formats). Integrated clock to document each measurement with date and time of execution. Integrated weld tables accessible through the touch screen display. Wide range of measure transducers. Automatic acknowledgment of the connected transducers. Powered by rechargeable Ni-Mh batteries and supplied with the power set. Battery life of approximately 10 h depending on usage. Firmware update via memory stick. Carrying suitcase for instrument and accessories.

DWT Pipe Purging 25MM - 165MM Kit In Case

DWT Pipe Purging 25MM - 165MM Kit In Case  DWT Pipe Purge System Complete Set • For pipe I.D. 25-165mm • c/w Plastic case   A flexible connection between the rubberised sealing discs allows the space between the bungs or dams to be situated or pulled through the bends of the pipe to be purged. INCLUDED WITHIN THE KIT:   Sealing discs (25-175 mm) Base unit (200 mm) 10 m stainless steel cable 10 m hose Coupling

TIG Brush Unique Propel System Torch With Lead

TIG Brush Unique Propel System Torch With Lead  To retain its leading position, Ensitech understood the necessity to think outside the box. User focus has now shifted from the power supply to the application process with the user requiring a solution that is fast, safe, ergonomic and economical.The design (patent pending) of the PROPEL Torch® differs radically. The ‘T’ shaped handle allows the user’s wrist to assume a more natural position during weld cleaning, which reduces user fatigue, and provides a safer, more powerful method of cleaning. by simply twisting the back of the torch you can keep adjusting the brush to give the perfect amount of bristles contact with your workpieceTHREADLESS BRUSH SYSTEM PATENT PENDING. QUICK RELEASE BRUSH FOR USE WITH THE TIG BRUSH WELD CLEANING SYSTEM

TIG Brush TBE-440 Weld Cleaning Machine Package

TIG Brush TBE-440 Weld Cleaning Machine Package  High-Performance Weld Cleaning, Passivation & Polishing – Built for Demanding Stainless Steel Applications The TIG Brush TBE-440 is a premium electrochemical weld cleaning system that delivers superior cleaning, passivation, and surface restoration on stainless steel welds. Engineered for speed, durability, and user safety, the TBE-440 features Dynamic Power Transfer (DPT) technology to ensure consistent performance even on heavier or more complex welds. Whether you're working in food-grade fabrication, architectural stainless, or pharmaceutical equipment, the TBE-440 is designed to deliver professional results — quickly, cleanly, and without surface damage. Key Features: Powerful Electrochemical Cleaning: Quickly removes heat tint, discoloration, and oxidation from TIG and MIG welds. Advanced Passivation: Simultaneously re-passivates the stainless surface, restoring corrosion resistance in one step. Dynamic Power Transfer (DPT): Automatically optimises cleaning output to match the weld and maintain consistent results. Polishing Functionality: Achieve a bright, uniform finish on stainless welds and surfaces. Safe & Efficient: Non-toxic and acid-free process eliminates the need for hazardous pickling pastes or abrasive methods. Industrial Durability: Built in Australia with a rugged, portable design suitable for workshop or on-site use. Kit Includes: TIG Brush TBE-440 Machine Heavy-duty brush lead and wand Earth lead and clamp Genuine TIG Brush cleaning and neutralising fluids (starter bottles) High-performance cleaning brush Carry case Operating manual and safety guide Technical Specifications: FeatureDetails Input Voltage 110–240V AC Output Voltage Up to 30V DC (cleaning output) Technology Dynamic Power Transfer (DPT) Weight Approx. 9–10 kg Dimensions 320 x 140 x 280 mm (approx.) Brush Compatibility TIG Brush genuine consumables only Ideal For: Stainless steel TIG & MIG welds Pipework, tanks, vessels, and railings Food & beverage industry equipment Pharmaceutical and medical-grade fabrications Architectural stainless finishes Marine and offshore applications The TIG Brush TBE-440 is the professional’s choice for fast, safe, and effective weld cleaning and passivation. Designed for demanding stainless steel applications where finish, hygiene, and corrosion resistance matter gives the user peace of mind knowing they will always achieve the fastest, safest and most effective weld cleaning results. This Set Contains:  1 TIG BRUSH® TBE-440 Weld Cleaning Machine - dual voltage   1 TIG BRUSH ® 240 Volt Lead   1 TIG BRUSH® Red Lead - 3m with Integral Handle 1 TIG BRUSH ® TB-25 Weld Cleaning Fluid - 1 Litre 1 TIG BRUSH ® Black Lead - 3m with Earth Clamp 1 TIG BRUSH ® TB-42 Neutralising Fluid - 1 Litre 1 TIG BRUSH ® Wand - 100mm 1 TIG BRUSH ® Spray Bottle 1 TIG BRUSH ® Short Shroud 1 TIG BRUSH ® Fluid Dipping Container 1 TIG BRUSH ® Long Shroud 1 TIG BRUSH ® Pink Microfibre Cloth 10 TIG BRUSH ® Spare Brush Tips 1 TIG BRUSH ® Blue Microfibre Cloth 1 TIG BRUSH ® 110 Volt Lead 1 TIG BRUSH ® Blue Brush Tip Box 1 TIG BRUSH ® Tanos Container 1 TIG BRUSH ® Memory Stick

Pferd Polifan Strong CO-Freeze SGP 50Grit Stainless Ceramic Flap Disc 125mm (5")

Polifan® Strong CO-Freeze SGP Flap Disc – 125mm x 22.23mm – 50 Grit (Ceramic for Stainless Steel) Size: 125 mm (5") x 22.23 mm Grit: 50 Material: Ceramic oxide with CO-Freeze active grinding aid Application: Stainless steel, Inox, nickel alloys, high-temperature-resistant steels Product Overview The Polifan® Strong SGP CO-Freeze from PFERD is a premium-grade ceramic flap disc built for demanding stainless steel and exotic alloy grinding tasks. With a cool grinding aid (CO-Freeze) and aggressive ceramic grain, it delivers fast stock removal, extended service life, and significantly reduced heat build-up, making it ideal for stainless steel and heat-sensitive materials. Key Features Aggressive 50 Grit Ceramic Grain Optimized for fast material removal with a consistent, aggressive cut. CO-Freeze Grinding Aid A special coolant additive integrated into the flap design reduces heat buildup, preventing discoloration or warping on stainless steel and alloy workpieces. High Stock Removal Rate Especially effective for surface leveling, weld seam dressing, and edge work on stainless and exotic metals. Long Service Life Durable polycotton backing combined with top-tier ceramic abrasive provides extended usage per disc. Minimal Discolouration and Burr Formation The cool grinding effect preserves the finish and reduces post-processing. Consistent Performance Maintains cutting power throughout its lifespan due to uniform flap wear and ceramic self-sharpening effect. Technical Specifications PropertyValue Diameter 125 mm (5") Bore 22.23 mm Grit Size 50 (Medium Coarse) Abrasive Ceramic with CO-Freeze additive Max RPM ~12,200 Shape Flat (T27) or Conical (T29) Tool Compatibility Angle grinders Application Range Stainless steel, Inox, titanium, duplex, and nickel alloys Applications Weld seam removal and blending Surface grinding and leveling on stainless steel Edge deburring and prep work for TIG/MIG weld zones Grinding of nickel-based and heat-resistant alloys Use in fabrication, shipbuilding, food-grade stainless finishing, and pharma-grade fabrication Benefits High removal rates with minimal pressure Low heat generation – reduces risk of tempering colors Longer life than conventional flap discs Reduced disc changes during extended tasks Excellent for stainless steel surface protection and high finish requirements Compliance & Safety   Produced by PFERD to meet strict EN 13743 safety standards Marked for Inox compatibility Always wear appropriate PPE when grinding

Weld Star Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel

Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel Applications include auto body repairs, tanks, boiler and construction works, 100mm reel is designed for use on spool guns and smaller welders Features and Applications E71T-GS is a self-shielded all position flux cored welding wire for single pass applications. Designed for welding thin carbon and carbon-manganese steels. Offers smooth stable arc, low spatter, easy slag removal and excellent bead appearance. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Applications include auto body repairs, tanks, boiler and construction works. Test Certificates can be found online @wilkinsonstar247.com      Standards AWS A5.20 - E71T-GS   Chemical Composition % (Typical) C% S% Mn% P% Si% Ni % Al% 0.22 0.0010 0.91 0.012 0.25 0.011 1.78   Mechanical Properties (Typical) Tensile Strength ≥480 MPa   Yield Strength ≥400 MPa   Elongation -   Impact Strength -   Test Temperature -   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.    Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel

Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel Ideal for automated welding applications such as orbital Mag or robotic welding Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Features and Applications Seamless metal cored wire with remarkable stable arc and no spatter. Meets NACE (HIC & SSC) requirements for sour service welding application in oil & gas industry. Can also be used for constructions that needs post weld heat treatment after welding and still offers mechanical properties to grade 5Y46 class. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics.    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355, A 106 Gr.B, A 333 Gr. 6P235GH - P355GHP235T1/T2 - P460NL2; L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 (42) 6 (2) M M21 (C1) 1 (3) H5 AWS A5.18 - E70C-6M H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.06 0.75 1.56 0.008 0.006 0.022 0.021               Mo% Cu% Al% V% Ti% Nb%   0.005 0.085 0.006 0.005 0.015 0.002     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 27%   Impact Strength 140 J 100 J Test Temperature -40ºC -60ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 70-220 14-26 1.20 mm 90-330 14-31 1.60 mm 180-420 25-38   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

BÖHLER Bohler Phoenix Blau 30 E6013 Mild Steel Welding Electrodes

Skip to the beginning of the images gallery Bohler Phoenix Blau 30 6013 Mild Steel Welding Electrodes The Böhler Phoenix Blau 30 6013 is a versatile and reliable general-purpose mild steel electrode designed to deliver excellent results in a wide range of welding applications. These electrodes are particularly valued for their ease of use and exceptional performance, even in challenging conditions. Below are the key product benefits: Key Benefits Smooth and Stable Arc Delivers a consistent and smooth arc, making it easier to achieve high-quality welds with minimal spatter. Ideal for welders of all skill levels, from beginners to seasoned professionals. Excellent Weld Appearance Produces clean, visually appealing weld beads with uniform deposition. Minimal slag coverage that is easy to remove, saving time during post-weld cleanup. Versatile Application Suitable for welding mild steel in a variety of positions, including flat, horizontal, vertical, and overhead. Performs well on both AC and DC power sources, offering flexibility in different setups. High Efficiency Designed for high deposition rates, ensuring efficient use of electrodes and faster project completion. Ideal for light to medium fabrication work, including sheet metal welding and general repairs. Reliability in Challenging Conditions Capable of maintaining excellent performance on less-than-perfect surfaces, such as rusted or slightly dirty steel. Provides consistent results in varying conditions, ensuring reliability across different applications. Ease of Use Known for its user-friendly operation, making it a go-to electrode for workshops and fieldwork alike. Reduced operator fatigue due to its smooth arc and ease of handling. Applications General fabrication Automotive repairs Construction and maintenance Light structural welding Conformance: AWS A5.1-04: E6013En ISO 2560-A: E 42 0 RC 11Approvals: TÜV (00425.), DB (10.132.19), ABS, BV, LR, GL (2Y), DNV

Cibo Unitised SA5 125mm (5") Velcro Grip-Backed Finishing Disc

Cibo Unitised SA5 125mm (5") Velcro Grip-Backed Finishing Disc Unitised SA 125mm grip discs in grade 5. Velcro-backed discs which can be used in combination with velcro back up pads (SKU: 125VEL/VZ) . Use these discs for : Weld blueing removalCleaningVery fine / pre-polish finishingDeburringScratch removal.

Cibo KP950F 150MM (6") Zirconia Grit Orbital Sanding Discs

  KP950 150 mm diameter F weight zirconia paper discs and sheets with a grip backing give an excellent speed of cut and increased performance over aluminium oxide discs on hardwoods and steel when performance matters.  Ideal for fine grinding  Use for: Stainless steel and steel matt finishing and deburring and on difficult hardwoods which would ‘dull off’ aluminium oxide discs too quickly. 40Grit - Packed in 50's 60Grit - Packed in 50's 80G - 220G - Packed in 100's

Cibo FMGU Rubber 60 Grit PTX Wheel 100mm x 100mm x 19mm Keyway

FMGU Rubber 60 Grit PTX Graining Wheel 100mm x 100mm x 19mm Keyway Rubber bonded graining wheels are designed for using on satin polishing machines such as the Finimaster Basic.The abrasive grain bonded into the flexible rubber matrix allows an even grain finish to be put on the workpiece.   FMGU’s are ideally used on stainless steel and non ferrous metals to give a nice shiny brush finish.  The finish will be shinier than using standard tex wheels. This is because FMGU contains silicon carbide grain while tex wheels are aluminium oxide grains.   They give a very consistent, decorative finish and are forgiving to work with. Just using a wheel manually looks like you’ve created a finish created by an industrial machine.   60 grit is also great for removing small scratches.

Cibo QLVT Lockit SCM Surface Conditioning Discs 50MM (2") Roloc Type

QLVT Lockit SCM Surface Conditioning Discs 50MM (2") Roloc Type  Surface Conditioning (SCM) quick change discs with a Lockit / Roloc type fixing. 50 mm diameter They are great for deburring, removing scratches and surface damage and leaving a fine soft satin finish.   Approximate equivalent finish: Coarse 150 / 180 gritMedium 240 / 280 gritVery Fine 320 / 360 grit

Cibo QLSA Lockit SA7 Unitised 50MM x 6MM Disc Grade 7 Roloc Type

QLSA Lockit SA7 Unitised 50MM x 6MM Disc Grade 7 Roloc Type  Unitised quick change discs with a Lockit / Roloc type fixing.SA 7 50 mm diameter discWith a flexible finishing action unitised discs are great for deburring, finishing and pre-polishing. Grade 5: Light scratch removal and pre-polish finishingGrade 7: deburring and fine finishing (nominally 320 grit)Grade 8: heavier deburring and tig weld blending (nominally 240 grit)

Cibo QLSA Lockit SA5 Unitised 50MM x 6MM Disc Grade 5 Roloc Type

  Unitised quick change discs with a Lockit / Roloc type fixing.SA 5 50 mm diameter discWith a flexible finishing action unitised discs are great for deburring, finishing and pre-polishing.   Applications: Grade 5: Light scratch removal and pre-polish finishingGrade 7: deburring and fine finishing (nominally 320 grit)Grade 8: heavier deburring and tig weld blending (nominally 240 grit)

Cibo QLPP Lockit Ceramic Grit Sanding Disc 50mm Diameter Roloc Type Pack Of 50

QLPP Lockit Ceramic Grit Sanding Disc 50mm Diameter Roloc Type Pack Of 50 Top coated ceramic grit quick change discs with a Lockit / Roloc type fixing.With a top coated grinding agent our ceramic discs give a great cut on multi-metal materials  Packed in 50's

Cibo QLCS Lockit Stripping disc 2"(50mm) diameter Roloc Type

QLCS Lockit Stripping disc 2"(50mm) diameter Roloc Type  Stripping quick change discs with a Lockit / Roloc type fixingFor removing paint & rust without damaging metal base material

Weldstar Dual Core 81R Seamless MIG Wire 16KG

Weldstar Dual Core 81R Seamless MIG Wire 16KG Features and Applications Seamless rutile flux cored wire suitable for applications where low temperature notch toughness is required. The wire has excellent weld puddle manipulation and superior out-of-position weldability. Provides low spatter and an easy slag removal for single or multiple pass applications. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Extremely low hydrogen levels giving more resistance to cracking. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36185 - S355, A 106 Gr.B, A 333 Gr. 6P235GH - P485GH up to A516; A537, A455P235T1/T2 - P485NL2; L210 - L485MB up to A 572S235 - S500 (NL1,2) up to A 572X42 - X70 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 50 (46) 6 (4) 1Ni P M21 (C1) 1 H5 AWS A5.29 - E81T1-Ni1M(C1)-J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.35 1.09 0.009 0.015 0.033 0.806               Mo% Cu% Al% V% Ti% Nb%   0.006 0.133 0.006 0.015 0.034 0.015     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 620 MPa   Yield Strength 550 MPa   Elongation 26%   Impact Strength 90 J 60 J Test Temperature -40ºC -60ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

ESAB Renegade VOLT ES 200i Dewalt Battery Powered Arc Stick Welder

ESAB Renegade VOLT ES 200i Battery Powered Welder The ESAB Renegade VOLT™ ES 200i is a true game-changer for welders who need power on the go. This compact, cordless Stick (SMAW) and Live TIG (GTAW) welder can run on battery, mains power, or a clever AMP+ Hybrid Mode — giving you total flexibility wherever the job takes you. Powered by DEWALT® FLEXVOLT® batteries (6 Ah, 9 Ah, or 12 Ah), the Renegade VOLT delivers serious performance. With four 12 Ah batteries, you can burn through up to 33 E6013 electrodes on a single charge, and those batteries come included.* Whether you’re working offsite, in a remote location, or somewhere mains power is limited, this machine is built to keep up. In AMP+ Hybrid Mode, it combines mains and battery power, which helps stop smaller breakers (like 10A or 16A) from tripping — and gives you an extra boost when running on 120V input.   The Renegade VOLT isn’t just powerful — it’s designed to take a beating. It features a tough, impact-resistant housing and multiple lift points, making it easy to move around the site. The bright, full-colour display is made for outdoor use, even in direct sunlight, and gives you useful info like battery status and estimated arc time at a glance.   Performance-wise, it delivers a smooth, stable arc with handy functions such as hot start, arc force, memory storage, and a dedicated cellulosic mode (6010), letting you fine-tune settings to suit the job. *Based on standard operating conditions. Features: 200 A output on AC mains (230V) Up to 140 A output on battery power Includes (4) DEWALT FLEXVOLT 20V/60V max 12 Ah batteries AMP+ Hybrid Mode for extra power Lightweight and portable battery powered welder Durable, impact-resistant housing Sun-friendly, intuitive user interface Memory storage for welding parameters Industries:  Agricultural Equipment Civil Construction Food and Beverage Marine and Offshore Mining Power Generation Repair and Maintenance Railcars Ship and Offshore Yards Transportation Processes:  SMAW/MMA (Stick) GTAW (TIG) Please note: This item is a special order item that needs to be ordered from the manufacturer.

Faithfull Wire Scratch Brush Brass Yellow Handle

Wire Scratch Brush Brass Yellow Handle Popular with both industrial and DIY users, Wire Scratch Brushes are used for removing rust, corrosion, paint and primer and for generally producing a clean surface. These Faithfull Wire Brushes have unique curved profiles and narrow faces, making them ideal for accessing hard-to-reach places. The high density wire fill and contoured plastic handle allow users to apply a higher pressure than that of a conventional wire brush. Fitted with colour coded handles with hanging slots. The FAIWBHANDB Wire Scratch Brush has the following specification:Handle colour: Yellow.Wire: Brass.

Faithfull Wire Scratch Brush Stainless Steel Blue Handle

Wire Scratch Brush Stainless Steel Blue Handle Popular with both industrial and DIY users, Wire Scratch Brushes are used for removing rust, corrosion, paint and primer and for generally producing a clean surface. These Faithfull Wire Brushes have unique curved profiles and narrow faces, making them ideal for accessing hard-to-reach places. The high density wire fill and contoured plastic handle allow users to apply a higher pressure than that of a conventional wire brush. Fitted with colour coded handles with hanging slots. The FAIWBHANDSS Wire Scratch Brush has the following specifications:Handle colour: Blue.Wire: Stainless Steel.  

Faithfull Faithful Steel Wire Scratch Hand Brush

Wire Scratch Brush Steel Red Handle Popular with both industrial and DIY users, Wire Scratch Brushes are used for removing rust, corrosion, paint and primer and for generally producing a clean surface. These Faithfull Wire Brushes have unique curved profiles and narrow faces, making them ideal for accessing hard-to-reach places. The high density wire fill and contoured plastic handle allow users to apply a higher pressure than that of a conventional wire brush. Fitted with colour coded handles with hanging slots. The FAIWBHANDS Wire Scratch Brush has the following specification:Handle colour: Red.Wire: Steel.

Honeywell Bionic Grinding Mask Clear Replacement Lens

Honeywell Bionic Grinding Mask Clear Replacement Lens Honeywell 1011626 Spare acetate visor to fit the Bionic face shield. StandardsEN 166

BÖHLER Bohler Big Vision Grinding Helmet / Mask PAPR Ready

Bohler Big Vision Grinding Helmet / Mask PAPR Ready  The Bohler Big Vision Air Grinding Visor is the perfect choice for welders and other professionals who need to protect their eyes and face from particles and dust during grinding. It features a large, clear visor that provides a wide field of vision, even when wearing prescription glasses. The visor is also made from high-impact resistant polycarbonate, so it can withstand even the toughest grinding jobs.The Big Vision Air Grinding Visor is designed to be used with a Bohler built-in fresh air system (PAPR) that helps to keep the wearer comfortable and protected. The system draws in clean air from the surrounding environment and filters it before delivering it to the wearer's breathing zone. This helps to reduce the risk of inhaling harmful fumes and dust.The Big Vision Air Grinding Visor is also very comfortable to wear. It features a lightweight, adjustable headgear that can be customized to fit any head size. The headgear also features a sweatband to help keep the wearer cool and comfortable.Benefits:Protect your eyes and face from harmful UV/IR rays and flying debrisStay cool and comfortable while weldingWeld with confidence knowing that you are protected from harmful fumesEnjoy a clear and accurate view of the weld poolGet a perfect fit with the comfortable headgear systemTech Spec:Grinding visor (glossy)180 x 160 mm viewing area  

Stronghand Tools Stronghand TCX6210 Fixture Table Inserta Side Clamp

Stronghand TCX6210 Inserta Side Clamp Insert this handy clamp into table holes for low profile, light duty, horizontal clamping, locating and stopping.Inserts into any 16mmØ hole fixture table. Introducing the Stronghand TCX6210 Inserta Side Clamp – your indispensable tool for precision clamping on 16mm fixture tables. Engineered for excellence, this clamp redefines efficiency and versatility in your welding and fabrication projects. Crafted with meticulous attention to detail, the TCX6210 Inserta Side Clamp embodies strength and reliability, providing a robust solution for securing workpieces with confidence. Whether you're tackling intricate welds or heavy-duty fabrication, this clamp stands ready to meet the challenge. Key Features: Precision Clamping: Designed for use with 16mm fixture tables, this clamp offers precise alignment and secure hold for workpieces of varying shapes and sizes, ensuring consistent results with every use. Versatile Design: With its Inserta feature, this clamp seamlessly integrates into your existing setup, offering unparalleled versatility for a wide range of welding applications. From flat surfaces to intricate angles, this clamp adapts to your needs with ease. Durable Construction: Built to withstand the demands of rigorous industrial environments, the TCX6210 Inserta Side Clamp boasts a rugged construction, delivering long-lasting performance and reliability you can trust. Effortless Adjustment: Featuring an intuitive design, this clamp allows for quick and easy adjustment, minimizing setup time and maximizing productivity. Get the job done faster without sacrificing precision. Secure Grip: Equipped with a powerful locking mechanism, this clamp provides a secure grip on your workpieces, preventing slippage and ensuring stability during welding and fabrication processes. This is the perfect accessory for lining up your workpieces prior to and during weldingStroke: 38mm

Stronghand Tools Stronghand Mini Angle Magnet Squares Twin Pack

  Stronghand Mini Magnet Squares Twin Pack Strong Hand Tools MS346AT Mini Magnet Squares provide low profile holding of stock in tight, hard to reach places. Use as many Mini Magnet Squares as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock. Perfect for use around the shop and compact enough to carry along for use out in the field. Dimensions: 59 x 50 x 16mmMax Pull Force: 10kgAngles: 30°, 60°, 45°,90° magnetic force is based on the longest side of the magnet on 10mm thick steel

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder This highly efficient TIG welder has standby functionality and is the latest generation EWM TIG AC/DC inverter machine, it features TIG AC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a modular machine which is capable of TIG AC/DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  Use the package uilder to spec your machine to your exact requirements   TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Flexfit case system allows accessories and parts to be added using standard slot nuts. Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle. Description: Modular AC/DC TIG inverter welding machine of the latest generation TIG AC/DC, TIG DC and TIG pulse activArc® and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Machine configuration ex works: Tetrix XQ 230 puls AC/DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Robust housing with impact-resistant plastic cover Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach LED status bar indicates the current operating status with colours Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains lead with 16 A earthed plug Controls: Popular, praised and simply indispensable 7" Digital Screen  Five favourites buttons Click wheel for convenient use with welder’s gloves Reliable push-button operation Direct access to all main functions All parameters at a glance AC and DC versions available   Welding process DC TIG   TIG AC   MMA DC   MMA AC   E-Hand cel Operating modes Non-latched 2T   Latched 4T   spotArc   spotmatic AC functions AC tungsten balling   AC sine   AC trapezoidal   AC rectangle   AC balance   AC amplitude balance   AC frequency: 30 Hz to 300 Hz   Automatic AC frequency   AC commutation optimisation for highest arc stability Ignition options HF   Liftarc Pulse type Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)   Thermal pulsing (time pulsing)   AC special MMA functions Hotstart   Arcforce   Antistick   Average value pulse welding Functions activArc   Automatic gas post-flow function   Cable resistance alignment Job functions Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel

Cibo FIH 125MM 5" Hard Backing Pad For Angle Grinders

Cibo FIH 125MM 5" Hard Backing Pad For Angle Grinders FIH: 125mm High performance hard back up pad for use with FX ceramic fibre sanding discs. Heat resistant and ventilated to give a stable hard contact base in use The ribbed cooling fins ensure a longer life and a reduced grinding temperature when compared to traditional back up pads. For 125 x 22mm sanding discs.Particularly good with high aggression discs such as the Cibo Ceramics

EWM Picomig 220 Puls TKG 230V Pulse MIG Welder Package

EWM Picomig 220 Pulse MIG Welder Why we love the EWM Picomig 220 Puls TKG MIG Welder Multiprocess MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW pulsed welding and GMAW standard welding Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function GMAW pulse welding of aluminium and aluminium alloys Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage  

3M Speedglas G5-01 Replacement Head Gear

3M Speedglas G5-01 Replacement Head Gear A highly adjustable, comfortable, headband designed to avoid sensetive areas of the head. Features a rotation stopper, designed to simplify the donning of the helmet. Smooth ratchet for precise tightening, fits head sizes 50 to 64. Includes the back part cushion and the alternative larger head rest Adjustment options to control the distance and angle from your eyes to the clear visor and welding filter. For maximum safety and comfort, make it a habit to check your equipment regularly. 3M™ Speedglas™ Headband with assembly parts, 613200 designed for 3M™ Speedglas™ Welding Helmet G5-01.3M™ Speedglas™ Headband with assembly parts, 613200 designed for 3M™ Speedglas™ Welding Helmet G5-01. Improved, self-adjusting comfort paddles along the forehead. Also features a rotation stopper, designed to simplify the donning of the helmet. Smooth ratchet for precise tightening, fits head sizes 50 to 64. Includes an alternative larger head rest that can extend the back part of the headband.

3M Speedglas Adflo Li-ion Battery Charger

The 3M Speedglas Adflo Li-ion Battery Charger 833111 is a genuine replacement battery charger designed specifically for 3M Adflo Powered Air Purifying Respirator (PAPR) systems fitted with compatible lithium-ion batteries. Designed to provide reliable and efficient charging, this genuine 3M replacement charger helps ensure your Speedglas Adflo air-fed welding helmet system remains powered and ready for use throughout demanding welding and fabrication operations. Compatible with both standard and heavy-duty Adflo lithium-ion batteries, the charger provides convenient battery charging for professional welders working in fabrication workshops, engineering facilities and industrial environments. The charger features intelligent charging technology with LED status indicators to communicate battery charging conditions, helping operators identify when their battery is charging, fully charged or requires attention. Whether replacing a damaged charger or purchasing an additional charging unit for workshop use, the 3M Speedglas Adflo Battery Charger 833111 provides a dependable solution for maintaining your powered air respiratory protection equipment. Key Features Genuine 3M Speedglas Adflo replacement battery charger Manufacturer Part Number: 833111 Designed for 3M Adflo lithium-ion batteries Compatible with standard and heavy-duty Adflo Li-ion batteries Suitable for compatible Speedglas Adflo powered air respirator systems Intelligent battery charging technology LED charging status indicators Helps maintain battery readiness for welding operations Suitable as a replacement or additional charger Ideal for professional welding and fabrication workshops Genuine 3M replacement accessory Battery Compatibility Designed for compatible: 3M Adflo Standard Li-ion Battery – 837630 3M Adflo Heavy-Duty Li-ion Battery – 837631 Compatible 3M Speedglas Adflo PAPR systems using the above lithium-ion batteries Important: This charger is specifically designed for Adflo lithium-ion batteries and must not be used with older NiMH battery packs or incompatible battery types. Typical Applications Ideal for: Charging 3M Speedglas Adflo batteries Air-fed welding helmet maintenance Welding and fabrication workshops Industrial respiratory protection equipment Engineering and manufacturing facilities Maintenance departments Replacement of worn or damaged battery chargers Keeping spare Adflo batteries charged and ready for use  

Cibo FMTM Tex PTX Wheel 120 x 100 x M14 Thread

Cibo FMTM Tex PTX Wheel 120 x 100 x M14 Thread Tex nonwoven flap brushes remove light damage and scratches and leave a fine satin finish FMTM 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Pro satin polishing machine Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm

Cibo Ceramic PTX FF87 Sleeve 280 x 100MM

The Cibo Ceramic PTX FF87 Sleeve 280 x 100mm is a high-performance abrasive sleeve designed for efficient grinding, stock removal and surface preparation of metal components using compatible PTX-style finishing machines. Featuring a high-performance ceramic abrasive grain, the FF87 provides an aggressive cutting action and excellent material removal, making it particularly suitable for demanding professional fabrication and metalworking applications. The 280 x 100mm sleeve format provides a large working surface, making it ideal for processing sheet, tube, box section and larger fabricated components. When used with the appropriate expansion roller and machine, the sleeve provides controlled contact with the workpiece for efficient grinding and surface preparation. Ceramic abrasive grain continually exposes fresh cutting edges as it wears, helping maintain a strong cutting action throughout the useful life of the sleeve. This makes the Cibo FF87 an excellent choice for professional users who require high productivity and consistent abrasive performance. Particularly useful within stainless steel fabrication, the FF87 is ideal for weld removal, surface preparation and other demanding grinding operations before subsequent finishing stages. Key Features Genuine Cibo FF87 abrasive sleeve High-performance ceramic abrasive grain 280 x 100mm sleeve size Designed for compatible PTX-style finishing machines Fast and efficient stock removal Aggressive cutting performance Excellent for weld grinding and surface preparation Large working area for efficient processing Suitable for demanding professional applications Ideal for stainless steel fabrication and metalworking Available in different grit options where applicable Typical Applications Ideal for: Stainless steel fabrication Weld removal and blending Metal stock removal Surface preparation Grinding sheet metal Finishing tube and box section Removing fabrication marks Engineering and metalworking Specification Brand: CiboProduct: FF87Product Type: Ceramic Abrasive SleeveDimensions: 280 x 100mmAbrasive Grain: CeramicMachine Type: Compatible PTX / Linear Finishing MachineApplication: Grinding, Stock Removal & Surface PreparationAvailable Grits: Various, depending on selected option  

Cibo FMCS PTX Clean + strip wheel 100mm x 100mm x 19mm keyway

 The FMCS PTX Clean & Strip Wheel 100mm x 100mm x 19mm is a specialist surface preparation wheel designed for removing rust, paint, coatings, oxidation and other surface contamination from metal components. Featuring an open, non-woven abrasive structure, the Clean & Strip wheel provides an effective cleaning action while helping to minimise unnecessary removal of the underlying base material. This makes it an excellent choice for preparing metal prior to welding, fabrication, painting or refinishing. The open construction helps resist loading when removing coatings and surface contaminants, allowing the wheel to maintain an effective cutting action throughout use. With its 100mm x 100mm dimensions and 19mm keyway fitting, the wheel is designed for use with compatible PTX and linear finishing machines. The wide 100mm working surface makes it particularly effective for cleaning larger areas of sheet metal, fabricated components and other metal surfaces quickly and consistently. Key Features FMCS PTX Clean & Strip Wheel 100mm x 100mm wheel dimensions 19mm keyway fitting Open non-woven abrasive construction Excellent for removing rust and oxidation Removes paint and suitable surface coatings Ideal for cleaning metal before welding Helps remove surface contamination Effective cleaning with controlled base-material removal Open structure helps resist clogging and loading Wide working surface for efficient processing of larger areas Ideal for fabrication, restoration and surface preparation  

Cibo FIH 115MM 4-1/2" Hard Backing Pad For Angle Grinders

Cibo FIH 115MM 4-1/2" Hard Backing Pad For Angle Grinders FIH: 115mm High performance hard back up pad for use with FX ceramic fibre sanding discs. Heat resistant and ventilated to give a stable hard contact base in use The ribbed cooling fins ensure a longer life and a reduced grinding temperature when compared to traditional back up pads. For 115 x 22mm sanding discs.Particularly good with high aggression discs such as the Cibo Ceramics

Stronghand Tools Stronghand T60120 Cube 5 Side HD Riser Block 100x100x100MM

These five-face precision machined Riser Blocks feature accurate bored holes in a diagonal pattern. They can be used to mount a fixtures to the side or end of a table and join tables together. Hole Size: Ø16mmDimensions: 100 x 100 x 100mm

Stronghand Tools Stronghand T60115 4 Side HD Riser Block 50 x 50 x 250MM

These four faced precision riser blocks feature accurate bored holes in a diagonal pattern.  They can be used individually or stacked to elevate a workpiece or clamp. Hole Size: Ø16mmDimension: 50 x 50 x 250mm

Stronghand Tools Stronghand 120Degree V-Block Fixture Rest

V-Blocks are designed to hold round parts and fit into the holes of the BuildPro® Table, Riser Blocks, Right Angle Brackets, D-Stop Bars and V-Spacer. Inserts into 16mmØ hole. Angle: 120° VDimension: Ø40 x 26mm Tube Size : 65mm

CK Worldwide Fronius Gas Through Fitting Watercooled Safe-Loc CK Torch Adaptor

Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor The Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor is a precision-engineered interface that allows you to connect water-cooled TIG torches with Safe-Loc fittings to Fronius welding machines. Designed to ensure reliable delivery of both power and shielding gas while maintaining efficient water cooling, this adaptor is ideal for professional TIG welding setups where durability and performance matter. Key Features & Benefits Secure Safe-Loc connection compatible with Fronius twist-lock style power receptacles. Gas-through design ensures consistent shielding gas flow directly to the torch. Water-cooled capability helps maintain lower operating temperatures for prolonged welding performance. Rugged construction suited for workshop or industrial TIG applications. Compatibility Connects water-cooled TIG torches (with Safe-Loc fittings) to Fronius TIG welding power sources using a 35 mm twist-lock connection. Typically used with high-performance TIG torch systems where water cooling and gas-through capability are required. Application Perfect for professionals seeking a dependable adaptor that maintains efficient cooling and gas delivery between Fronius machines and compatible water-cooled TIG torch assemblies

Bluespot Digital Vernier Caliper 150mm (6in)

Bluespot Digital Vernier Caliper 150mm (6in) The BlueSpot Digital Vernier Caliper has external and internal measuring jaws with a deep measuring blade. With metric and imperial scales and an LCD display. Supplied in a robust plastic box. Specification: Range: 0-150mm (6in)Accuracy: ± 0.25mm/0.01in

Weld Star Weldstar FN55 E NiFe-Cl MIG Wire 15KG

Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Grey cast iron, malleable, nodular** Illustrative, not exhaustive list   Standards EN ISO 1071 - SC NiFe-1 AWS A5.15 - E NiFe-CI   Chemical Composition % C% Mn% Si% P% S%     max max max max max     2.00 0.80 0.20 0.03 0.03                   Fe% Ni% Cu% Al%       rem. 54.00 max max         56.00 2.50 1.00         Mechanical Properties Tensile Strength 400 - 579 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 625 NiCrMo-3 MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 82 NiCr-3 MIG Wire 15KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar SG3 G4Si1 Mild Steel MIG Wire 250KG Endurance Pac

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 59 NiCrMo-13 TIG Filler Wire 5KG

Features and Applications Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. Versatile alloy with excellent wet corrosion resistance for the most demanding applications. The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s. Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 276, Alloy 686** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6059 - NiCr23Mo16 AWS A5.14 - ER NiCrMo-13   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max  max max max   0.010 0.50 1.50  0.020 0.005 0.08                 Ni% Co% Al% Cr% Mo%     56.00 max 0.10 22.00 15.00     min 0.30 0.40 24.00 16.50       Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Alloy C276 NiCrMo-4 TIG Filler Wire 5KG

Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4 AWS A5.14 - ER NiCrMo-4   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max max max max   0.05 0.80 0.70 0.030 0.010 0.75                 Cu% Ni% Co% Ti% Al%     max 93.00 max 2.00 max     0.20 min 1.00 3.50 1.00       Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 82 NiCr-3 TIG Filler Wire 5KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 625 NiCrMo-3 TIG Filler Wire 5KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni% Co% Al% Ti% Cr% Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG

Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG Features and Applications Rutile-cellulosic electrode with good weldability in all positions. Exceptional arc stability and reduced spatter for decreased cleaning time. Suitable for low open circuit voltage transformers (min. OCV 42V). Typical applications include assembly, workshop and repair welding of mild and low-alloyed steels. Re-drying not generally required. If necessary 100-110°C for 1 hour.    Typical Base Materials 235JR-S355JR, S235JO-S355JO, P195TR1-P265TR1, P195GH-P265GH, L245NB-L360NB, L245MB-L360MB, shipbuilding steels: A, B, D ASTM A 106 Gr. A, B; A 283 Gr. A, C; A 285 Gr. A, B, C; A 501 Gr. B; A 573 Gr. 58, 65; A 633 Gr. A, C; A 711 Gr. 1013 API 5 L Gr. B, X42, X52** Illustrative, not exhaustive list   Standards EN ISO 2560-A - E 42 0 RC 11 AWS A5.1 - E6013   Analysis of all-weld metal % (Typical) C% Si% Mn% P% S% 0.08 0.40 0.45 0.020 0.015   Mechanical Properties (Typical) Tensile Strength 535 MPa   Yield Strength 445 MPa   Elongation 24%   Impact Strength ≥50 J   Test Temperature 0ºC   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.   Welding Parameters Ømm Current (A) 2.50 mm 50-90 3.20 mm 80-130 4.00 mm 140-190   Polarity AC; DC (+)(-)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER80S-Ni1 Low Temp Mild Steel TIG Filler Wire 5KG

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.09 0.70 1.20 <0.150 <0.150 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 1.00 <0.15 <0.200 <0.030 <0.50   Mechanical Properties (Typical) Tensile Strength 600 MPa   Yield Strength 480 MPa   Elongation 26%   Impact Strength 100 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER317L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire used for welding alloys of a similar chemical composition. Ideal for severely corrosive environments where crevice and pitting corrosion are of concern. Low carbon content reduces the possibilities of intergranular carbide precipitation. Not suitable for structural service above 400°C or for cryogenic applications. Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance. Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.    Typical Base Materials Stainless CrNiMo steels e.g. 317L or similar** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 15 3 L AWS A5.9 - ER 317 / 317L   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.43 0.45 <0.030 <0.030                   Ni% Cr% Mo% Cu%       13.60 18.82 3.55 <0.75         Mechanical Properties Tensile Strength ≥480 MPa   Yield Strength ≥300 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER120S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.110 0.70 1.90 <0.015 <0.015 <0.25 0.50               Ni% Mo% Al% V% Ti% Zr%   2.50 0.50 <0.010 <0.030 0.08 <0.050     Mechanical Properties (Typical) Tensile Strength 1040 MPa   Yield Strength 960 MPa   Elongation 16%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER100S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications NiCrMo fine-grained steels for low temperature high strength applications. Extreme crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub-zero temperatures down to -50°C. Typically used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3NiCrMo AWS A5.28 - ER 100S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.08 0.75 1.40 <0.015 <0.015 <0.25 0.55               Ni% Mo% Al% V% Ti% Zr%   0.60 0.25 <0.020 <0.020 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 730 MPa   Yield Strength 640 MPa   Elongation 20%   Impact Strength 50 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

Weltek Navitek Navitek Airfed Clear Grinding Mask Kit

Navitek Airfed Respiratory Protection System  Includes: Clear Respiratory Visor, Blower Unit and Storage Carry Bag 20-Point APF Protection  This airfed grinding helmet system is classified as equivalent to FFP3 and provides protection against Coronavirus. FFP3 provides a 20-points protection factor unlike an FFP2 disposable mask that offers 10-points protection. FFP3 masks are currently being used in hospitals to protect medical staff treating patients with covid-19. The system also provides full face protection with the elasticated hood unlike a mask. The only requirement is that the system is sanitised after each use/shift. This rechargeable battery operated system is currently being used effectively in care homes up and down the country.

Portwest P305 Valved FFP3 Premium Dolomite Face Mask Pk Of 5

Premium FFP3 respirator featuring a bigger and stronger cup compared to other FFP3 masks. Gasket around face joint and wide adjustable elastic bands for ultimate wearer comfort.High performing exhalation valve works efficiently to reduce heat inside the mask and provides comfort when used in hot and humid conditions. Dolomite optional clogging test for maximised breathability comfort.   Features Excellent face fit test performance Internal foam gasket ensures a tight face seal Wide adjustable head straps for ultimate wearer comfort A more generous cup shape than most other FFP3 masks High performance exhalation valve to reduce heat and provide comfort when used in hot and humid conditions Dolomite optional clogging test (D) to provide more comfortable breathing and longer lasting filtration performance Retail box which aids presentation for retail sales CE certified UKCA marked CE-CAT III     Materials PP, EVA Foam

Portwest PS69 Airtech Bump Cap Micro Peak

PS69 Airtech Bump Cap Micro Peak Innovative design bump cap with maximised ventilation thanks to the side mesh and ventilation slots in the plastic shell. Modern textile design with reflective piping for enhanced visibility. Micro peak makes the bump cap suitable for indoor use or applications in confined spaces. Size adjustment buckle.   Features Micro peak (2.5cm) for better visibility and for use in confined spaces Cooling mesh fabric for increased breathability Inner ABS shell and soft pad for shock absorption Reflective piping for increased visibility Buckle size adjustment for easy fitting Retail bag which aids presentation for retail sales CE certified UKCA marked   Materials Nylon, ABS, EVA

Cibo Rebel One GA7 Combi Unitised Fillet Weld Polish Disc 150x6x25.4MM

GA7 Cibo Combi Unitised Fillet Weld Polish Disc 150x6x25.4MM The new Cibo Combi unitised fillet weld polishing discs. 100% control and a 30% reduction in process time. Available in 3 grades.grade 6 150 mm x 6 mm x 25.4 mm GA6 Light weld removal and super fine finishGA7 Medium weld removal and a super fine finishGA8 Heavier weld removal and a super fine finish Recommended speed 3,000rpmMaximum operating speed 6,000rpm Mirror polish directly after the GA discs with the Cibo PV102 and felt discs. **Pack Of 6 Discs**

Cibo Rebel One GA6 Combi Unitised Fillet Weld Polish Disc 150x6x25.4MM

GA6 Cibo Combi Unitised Fillet Weld Polish Disc 150x6x25.4MM The new Cibo Combi unitised fillet weld polishing discs. 100% control and a 30% reduction in process time. Available in 3 grades.grade 6 150 mm x 6 mm x 25.4 mm GA6 Light weld removal and super fine finishGA7 Medium weld removal and a super fine finishGA8 Heavier weld removal and a super fine finish Recommended speed 3,000rpmMaximum operating speed 6,000rpm Mirror polish directly after the GA discs with the Cibo PV102 and felt discs. **Pack Of 6 Discs**

Cibo SLST Industrial Line Metal Grinding Disc 115mm(4-1/2") & 125mm(5")

The Cibo SLST Industrial Line Metal Grinding Disc is a professional abrasive disc designed for reliable metal grinding, weld removal, stock removal and general fabrication applications. Part of the Cibo Industrial Line range, the SLST provides a robust grinding solution for everyday use in welding shops, fabrication facilities, engineering workshops and maintenance environments. Available in both 115mm (4-1/2") and 125mm (5") diameters, these grinding discs are suitable for use with compatible angle grinders and provide a practical choice for working on fabricated steel components, welded joints and general metalwork. The abrasive construction provides effective material removal, making the SLST ideal for dressing welds, removing excess material, preparing edges and deburring components before further fabrication or finishing. Key Features Genuine Cibo SLST Industrial Line grinding disc Designed for metal grinding and stock removal Available in 115mm (4-1/2") and 125mm (5") Ideal for weld grinding and dressing Effective removal of excess metal Suitable for edge preparation and deburring Robust abrasive construction Designed for regular professional use Ideal for welding and fabrication workshops Suitable for compatible angle grinders Available Sizes 115mm (4-1/2") – For compatible 115mm angle grinders. 125mm (5") – For compatible 125mm angle grinders. Select the required diameter from the available product options. Typical Applications Ideal for: Grinding and dressing welds Metal stock removal Edge preparation Deburring fabricated components Cleaning up welded joints General steel fabrication Engineering and maintenance Workshop metal grinding Specification Brand: CiboRange: Industrial LineProduct: SLSTProduct Type: Metal Grinding DiscAvailable Diameters: 115mm (4-1/2") & 125mm (5")Application: Grinding, Weld Removal & Stock RemovalMachine Type: Compatible Angle Grinder The Cibo SLST Industrial Line Metal Grinding Disc is an excellent everyday choice for welders, fabricators and engineers requiring dependable material removal and consistent grinding performance. Please Note: Always select the correct disc diameter and specification for your angle grinder and application. Never exceed the maximum operating speed marked on the disc and always use appropriate PPE and machine guarding. Use the SLST discs for: Grinding steel, iron and stainless steelMarket beating performance

CIBO FPF Flat Ceramic Grit Flap Disc 4.5"(115mm)

The CIBO FPF Flat Ceramic Grit Flap Disc 115mm (4.5") is a high-performance abrasive disc designed for fast stock removal, weld grinding, deburring and surface preparation in demanding metalworking applications. Featuring a ceramic abrasive grain, the FPF flap disc provides an aggressive cutting action and efficient material removal, making it an excellent choice for professional welders, fabricators and engineers who require high productivity when grinding metal components. The flat flap disc profile is particularly suited to working on flat surfaces and provides excellent control during grinding and finishing operations. The overlapping abrasive flaps wear progressively during use, continually exposing fresh abrasive grain to help maintain consistent cutting performance throughout the life of the disc. With its 115mm (4.5") diameter, the CIBO FPF is designed for use with compatible angle grinders and is ideal for everyday use within professional welding, fabrication and engineering workshops. Key Features Genuine CIBO FPF flap disc High-performance ceramic abrasive grain 115mm (4.5") diameter Flat flap disc profile Fast and efficient stock removal Excellent for grinding and blending welds Suitable for deburring and edge preparation Progressive flap wear exposes fresh abrasive grain Consistent cutting performance Ideal for demanding fabrication applications Suitable for compatible 115mm angle grinders Typical Applications Ideal for: Weld grinding and blending Heavy stock removal Grinding fabricated components Edge preparation Deburring Surface preparation Removing excess weld material General metal fabrication Specification Brand: CIBOProduct: FPFProduct Type: Ceramic Grit Flap DiscDiameter: 115mm (4.5")Profile: FlatAbrasive: Ceramic GrainApplication: Grinding, Stock Removal, Weld Blending & Surface PreparationMachine Type: Compatible 115mm Angle Grinder The CIBO FPF Ceramic Flap Disc is an excellent choice for professional users looking for aggressive material removal, long-lasting abrasive performance and efficient weld grinding in demanding workshop environments. Please Note: Select the appropriate grit for the required level of stock removal and surface finish. Always ensure the disc specification and maximum operating speed are compatible with your angle grinder and use appropriate PPE and machine guarding.

Weld Star Gas Shielded Dual Core 71R Seamless Wire 1.2MM 16KG

Features and Applications Seamless rutile flux cored wire with rapidly solidifying slag. Excellent welding properties combined with extreme impact toughness down to -40ºC. The wire is all positional and runs with a very stable soft arc producing excellent weld bead finish with negligible spatter. Ideal for root welding on ceramic backing. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355P235GH - P355GHP235T1/T2 - P460NL2 L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 4 (2) P M21 (C1) 1 H5 AWS A5.20 - E71T-1M (C1) J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.41 1.29 0.012 0.006 0.030 0.013               Mo% Cu% Al% V% Ti% Nb%   0.004 0.145 0.002 0.020 0.044 0.012     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 26%   Impact Strength 100 J 70 J Test Temperature -40ºC -20ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 140-230 19-25 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star SG3 G4Si1 MIG Wire 15KG - 300MM Plastic Reel

Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg D300 D300 D300 72 72 72

Weld Star Copper Free (CF2) Mild Steel SG2 (G3Si1) MIG Wire 15/18KG

Features and Applications A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment. Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed plastic bag packaging to prevent moisture absorption. Fitted with alignment hole clip to ensure smooth feeding. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 0.010             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 18 Kg 18 Kg BS300 BS300 BS300 72 56 56 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance

Weld Star Alloy 82 (NiCr-3) MIG Wire 15KG

Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Nickel Alloy 625 (NiCrMo-3) MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Kemppi Master M 205 Pulse Air Cooled MIG Welder With 5Mtr MIG Torch

Why we love the Kemppi Master M 205 Pulse MIG Welder The Master M 205 sets new standards for power and performance in a portable MIG welding machine. With a portable, lightweight design that's easy to carry, you'll enjoy having a portable MIG welder that can be moved wherever you need it. If you're working in tight spaces, the 5" LCD screen is bright and easy to read, while self-charging LED lights can be turned on to improve safety. They work with or without mains power. The Master M 205 is also easy to use. These portable MIG welding machines come with Weld Assist, which automatically sets parameters to help you start welding quickly. It's a simple solution that welders can also use with minimal experience. Just select the material thickness, joint type, and welding position, and start welding. The Master M 205 is a portable pulse MIG welder with 200 amps of power at a 40% duty cycle. Take on a wider range of materials with pulse welding and do your best work anywhere with the convenience of a 1-phase power supply. Save time and take welding to the next level with 37 built-in MIG/MAG welding programs for Fe, Ss, AlMg5, AlSi5, CuSi3, and CuAl8 filler materials. The Master M 205 comes with 17 pulse-MIG programs and 20 1-MIG programs. If you're looking for a portable MIG welder that can complete high-quality welds in challenging environments, the Master M 205 should be at the top of your list Key Features Versatile process selection with premium MIG/MAG, DC TIG, and stick welding options Master M 205 includes a pulse MIG welding option with a 1-phase power supply Lightweight and portable welders that are easy to carry anywhere Ideal for tight workspaces Master M 205: 17 pulse MIG welding programs and 20 1-MIG welding programs as a standard Root pass welding, thin sheet welding, and gap bridging with MAX Cool arc welding process as a standard in Master M 323 Self-charging LED work lights for better worksite safety Designed to be lifted with a crane Weld Assist feature for fast parameter setting 6 memory channels 40 % duty cycle Compatible with a generator Multivoltage as a standard feature Alternative transport cart options Kit Includes: Kemppi Master M 205 Pulse MIG Welder Kemppi Flexlite GXe305G MIG Torch ***Please Note Feed Rollers Need To Be Ordered Separately ***

Weltek Navitek Navitek S13 Welding & Grinding Airfed Helmet

The Navitek® S13 combines the best of autodarkening protection for welding, with one of the largest clear grinding visors available on the market.  The Navitek® shell and all its polycarbonates are certified for grinding with the specific standards EN 166B and EN 175B. The visor is made in perfectly clear 1.0mm thick polycarbonate.  The excellent ergonomics provides perfect protection of the forehead, the ears and the neck. This high comfort level can be advanced once equipped with side vision in shade DIN 5: the Navitek® S13 then provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate.  The Navitek® S13 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses.  Positionned into the liftable front frame, The new autodarkening S13 presents 2 major advantages:  1 - A revolutionary autodarkening filter restituting colors and enhancing contrasts. 2 - An extra-large viewing area in a light and ergonomic helmet.  The S13 is indeed equipped with a specific glass-pack: the vision of colors and contrasts, in both grinding and welding phases, is outstanding and uncomparable.  This true vision greatly improves the general quality of the welding cords, relieves the operator from stress and over-concentration, and make possible digital display reading.  In addition, the viewing area of the S13 has been extended to 100 x 67mm, with a perfect positioning and centering. This extra-large viewing area offers excellent optical classes 1/1/1/2.  The 4 arc sensors are associated to a very fast switching speed of 0,1ms for a flawless detection of the welding arc, with all welding processes: electrodes, MIG/MAG, TIG and micro-TIG.  2 ranges of welding shades are available to the welder: from DIN 5 to DIN 8, and from DIN 9 to DIN 13, in addition to the sensitivity level of the 4 arc sensors, and the delay which can be adjusted from 0,1s to 1,9s.  All the settings and parameters on the S13 are visible in a large and internal digital display, directly in front of the welder. All control knobs on the S13 are soft-touch, making it easy to adjust even with gloves on. 

Jasic EVO EM200CT PFC 110/230V MIG Welder Package With Trolley

Jasic EVO 2.0 200PFC 110/230V MIG Welder With Trolley Package The Jasic EVO MIG 200CT is built for serious welders who want industrial performance in a rugged, easy-to-use package. With a tough ergonomic design, advanced digital controls and an impressive range of intelligent features, this compact MIG welder delivers outstanding results across fabrication, automotive, agricultural and on-site work. Featuring ClearVision HD digital display technology and a 45° slanted control panel, the 200CT offers exceptional visibility—even in bright workshop lighting—making setup quicker and more accurate. Its intelligent synergic control selects the ideal welding parameters automatically: simply choose your wire type, wire size, gas and material thickness, and you’re ready to weld. Built to perform in demanding environments, the unit includes Power Factor Correction (PFC) for generator-friendly operation, wide voltage adaptability (95–265V), and Active Balancing Air Passage (ABAP) cooling for improved reliability. Inside the wire-feed cabinet, you’ll find LED convenience lighting and a handy feed roll storage slot, with spool-gun compatibility for fast aluminium changeovers. Extra features like Smart Lift TIG, advanced MMA functions, VRD safety, fan-on-demand, overheat/overcurrent protection, and a quick factory reset make this a truly versatile multi-process machine. Optional remote controls, digital torches and TFT screens further enhance usability for professional fabricators who want total control at their fingertips. Whether you're tackling precision fabrication or consistent spot welding, the Jasic EVO MIG 200CT is engineered to deliver reliability, flexibility and exceptional weld quality—every time. Key Features ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Fan cooling on demand. Voltage reduction device(VDR) Ovecurrent and overheat protection

Jasic EVO AC/DC ET200P PFC 110/230V Pulse TIG Welder

Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder – Precision, Performance, and Versatility The Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder delivers professional-grade welding performance with unmatched precision and flexibility. Engineered for both AC and DC TIG applications, this welder is ideal for aluminium, stainless steel, mild steel, and other metals, making it perfect for fabrication, maintenance, and professional workshop use. Equipped with ClearVision technology and intelligent synergic control, setup and welding have never been easier. The welder offers multiple AC waveforms, mixed waveform frequency and duty cycle control, and a Welding Engineer Mode for in-depth parameter adjustments. Smart features like optimized gas consumption, generator compatibility, and auto sleep mode ensure efficiency, while fan-on-demand reduces energy use and noise. Safety and durability are at the core, with a Voltage Reduction Device (VRD), overcurrent and overheat protection. The EVO 2.0 also supports optional upgrades like a TFT digital screen and flexible remote control solutions. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG200P offers reliable, high-quality welding performance you can count on every time. Key Features 5 Year Warranty ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode: Allows access to the sub-menu to change more in-depth parameters. Multiple AC waveforms available Mixed waveform, mixed waveform frequency & mixed waveform duty cycle. Smart gas for optimised shielding gas consumption. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Fan on demand. Voltage reduction device (VRD) Overcurrent and overheat protection. An optional TFT screen is available as an upgrade 

Stinger V002 Insulated Electrode Holder

Stinger V002 Insulated Electrode Holder The Stinger V002 Insulated Electrode Holder is a premium, heavy-duty electrode holder designed for professional welders who demand superior performance, durability, and safety. With its robust construction and fully insulated design, this electrode holder ensures a secure grip and efficient current transfer, making it ideal for demanding welding applications. Key Features: Heavy-Duty Performance – Engineered for high-amperage welding with reliable current flow. Fully Insulated Design – Enhances safety by preventing accidental contact with live parts. Superior Grip – Strong clamping mechanism ensures a firm hold on electrodes for precise welding. Ergonomic Handle – Comfortable, non-slip grip reduces fatigue during extended use. Durable Construction – Built to withstand tough working conditions and extreme temperatures. Perfect for industrial welding, fabrication, and professional applications, the Stinger V002 Insulated Electrode Holder offers unmatched reliability, safety, and efficiency for serious welders. American Made | Durable | High QualityElectrode Holder For Stick Welding/ SMAWFully InsulatedSilicone Brass95% Copper For Better ConductivityThick Brass Stays Cooler LongerReliable V GripPerfect for Welding Shops, Pipelines & Pipe Fabrication

Furick WP9/20 Pink Ceramic Cups Collet Body Mount

Furick WP9/20 Pink Ceramic Cups – Collet Body Mount Torch Compatibility: WP9 / WP20 / WP25 Mount Style: Standard Collet Body (non-gas lens) Material: High-strength pink ceramic Application: General TIG welding – steel, stainless, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups – Collet Body Mount are designed for TIG welders using standard collet body setups (not gas lens). These high-quality cups offer excellent arc stability, good puddle visibility, and thermal durability, making them ideal for a variety of welding applications where gas lens performance is not required. These cups are perfect for welders who prefer or require a traditional collet body configuration on their WP9 or WP20 series torches. Key Features Standard Collet Body Mount Design Compatible with traditional collet and collet body setups—no gas lens required. Ideal for straightforward TIG welding operations or where gas lens kits are unavailable. Durable Pink Ceramic Manufactured from high-purity alumina ceramic with enhanced thermal resistance and mechanical strength, built to withstand regular use in shop or field conditions. Versatile Cup Sizes Typically available in #4 through #8 (1/4" to 1/2" orifice), giving you control over shielding gas coverage and access to different joint configurations. Reliable Arc Focus The ceramic structure helps channel shielding gas efficiently over the arc and weld zone, improving arc focus and reducing oxidation. Technical Specifications AttributeValue Material Alumina pink ceramic Mount Type Standard collet body (non-gas lens) Torch Series WP9 / WP20 / WP25 air-cooled Cup Sizes #4 to #8 (varies by kit/stock) Amperage Range Up to ~180 A (air-cooled torch) Applications TIG welding of mild steel, stainless steel, aluminum, and chromoly Fabrication shops, motorsport builds, exhaust and roll cage work Ideal for welders without a gas lens setup or where stubby kits aren't required Benefits   Easy installation with standard collet bodies—no torch modifications needed Durable and affordable for everyday welding tasks Allows consistent gas coverage for cleaner welds Compatible with multiple cup sizes for flexibility

Furick WP9/20 Pink Ceramic Gas Lens Cups

Furick WP9/20 Pink Ceramic Gas Lens Cups Compatible with: WP9, WP20, and other small-body TIG torches (9/20 series) Cup Type: Gas Lens Ceramic Color: Pink Application: Precision TIG welding – stainless steel, titanium, mild steel, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups are high-performance gas lens cups designed for precision TIG welding applications. Known for their excellent gas coverage, thermal durability, and wide visibility of the weld puddle, these cups are a must-have for welders using WP9 or WP20 series torches—especially in stainless steel and exotic material work. Key Features Premium Pink Ceramic Construction Offers excellent thermal resistance and mechanical strength for long-lasting use under demanding TIG conditions. Optimized for Gas Lens Setups Designed specifically for use with gas lens collet bodies, enabling superior shielding gas flow and puddle coverage, especially in stainless and reactive metal welding. Enhanced Gas Coverage Helps achieve laminar gas flow across the weld zone—reducing oxidation, contamination, and improving overall weld quality. Stubby Gas Lens Compatibility These cups pair well with stubby gas lens kits, ideal for tight-access TIG applications and improved torch balance. Wide Range of Sizes Commonly available in cup sizes #4 through #8 (and sometimes larger), offering options based on joint access, amperage, and gas flow needs. Technical Specifications AttributeValue Material Alumina pink ceramic Cup Sizes #4, #5, #6, #7, #8 (varies by set) Torch Fitment WP9, WP20, WP25 (9/20 series) Use with 45V44, 45V43, 45V42, or stubby lens kits Max Amperage Up to 200 A (air-cooled systems) Applications TIG welding of stainless steel, titanium, Inconel, and mild steel Fabrication, exhaust work, aerospace, and food-grade pipe welding Ideal for low-current, precision work where clean welds and shielding are critical Benefits   Superior shielding gas control over standard cups Improved arc stability and puddle visibility Compatible with Furick and most universal stubby lens kits Helps reduce rework due to oxidation or arc wander Durable and cost-effective for daily professional use

Kemper Dusty Evo High Vacuum MIG Torch Fume Extraction Unit

The Kemper Dusty Evo High Vacuum Fume Extraction Unit is a compact and powerful mobile welding fume extractor designed for on-torch extraction and high-vacuum source capture. Ideally suited to use with compatible MIG/MAG fume extraction torches, the Dusty Evo captures welding fumes directly at the source, helping remove hazardous airborne contaminants before they can spread into the welder's breathing zone and surrounding workshop. Despite its compact trolley-style design, the Dusty Evo delivers an impressive 260m³/h extraction capacity and up to 18,100 Pa vacuum, powered by two high-performance suction turbines. Stepless speed control allows the extraction performance to be adjusted to suit the welding process and torch being used. At the heart of the Dusty Evo is a KemTex® ePTFE cleanable filter cartridge with a filtration efficiency of greater than 99.9% and M dust classification. Manual filter cleaning helps maintain extraction performance and allows the filter to be reused rather than simply replaced when loaded. The lightweight and mobile construction, combined with a large rigid handle and recessed grips, makes the Dusty Evo particularly convenient for workshops, repair work, site applications and welding stations that regularly change location. For professional fabricators looking to introduce effective source extraction without installing a large fixed extraction system, the Kemper Dusty Evo provides an extremely versatile solution.  

Faithfull Faithful 110V 16A 14Mtr 2.5MM Extension Lead

Faithfull Trailing Leads with an industrial plug and socket. Conforms to BSEN60309 providing ingress protection to IP44 and added durability and protection from being dropped or dragged around. Trailing leads are ideal for use with transformers, site lights and power tools to extend their working range. Available in 1.5mm or 2.5mm cable and 16 or 32 amp versions. 110V 16 amp socket110V 16 amp Plug2.5mm cable

F-Tech Armur Steel Mobile Fume Extraction Unit With 7" Touch Panel Control

Features: Portable 4 wheel unit on swivel castors for easy movement around the workshop High performance positional suction arm The armotech and armoflex suction arms have been designed for maximum efficiency, high manouverability and robustness during the extraction of welding fumes  1100 M3/h extraction rate at hood 99.5% filter efficiency  Active Carbon filter (10KG) For VOC's (Stainless & Galv steels) User Friendly 7" HMI touch screen panel including - hour meter, clogged filter alarm & alarm log Fully servicable Readily available accessories and spare parts Max recommended arm length is 4mtr Armoflex/ 3mtr Armotech Available in 110V, 230V & 400V options Arm - 12 month Warranty Meets Latest HSE Requirements

F-Tech Wolf On Torch Fume Extraction System

F-Tech Wolf On Torch Fume Extraction System The new F-Tech Wolf extraction unit in combination with the F-Tech fume torch is a high quality on torch extraction system that can be used with 2 fume torches simultaneously. The wolf extracts the fumes directly at the source, ensuring maximum safety not only for the welder but for everyone else in the workspace Key Features:   Automatic Stop/Start Function fitted as standard Active carbon filter (1.5kg) for VOC's(stainless steel & Galvanised steels etc) Automatic cleaning function via compressed air Brushless motor on all voltages Digital control/informational panel including hour meter & clogged filter alarm can extract from 2 x 15mtr hoses simultaneously  3 filtration stages (cartridge BIA M class + active carbon + spark trap 1/4" female universal fitting dust collection tray each unit is supplied with 2 x machine side male hose connectors & 1 x blanking plug Available in 110V, 230V & 400V 5 Year Warranty  

F-Tech Absolute Main Filter For Armur/EVO 2.2

Absolute Filter - F-Tech Armur/EVO 2.2 Replacement Main Filter Unit 

Kemper Welding Fume Extraction Welding & Grinding FilterTable

Kemper Welding Fume Extraction Welding & Grinding FilterTable The Kemper fume extraction FilterTable is an affordable combination of working table and filter unit. The large work surface allows for effective work during welding and grinding with low to medium levels of smoke and dust. The extraction unit with disposable filter is designed for low to medium levels of smoke and dust and for occasional to frequent use.   Benefits Maintenance door allows easy filter change Effective spark protection ensures maximum safety Downdraft extraction throughout the whole working area Wide range of applications due to large working area of 1,200 x 800 mm

Norton Abrasives Norton Vulcan Inox 230MM(9") x 1.9MM Thin Cutting (Slitting) Disc

The Norton Vulcan Inox 230mm (9") x 1.9mm Thin Cutting Disc is a professional-quality abrasive disc designed for fast, accurate cutting of stainless steel (Inox) and metal using a compatible angle grinder. With its 1.9mm thin profile, the disc provides a fast cutting action while helping to reduce material loss, heat generation and the amount of finishing required after cutting. The large 230mm (9") diameter makes it particularly suitable for cutting larger sections, sheet, tube, bar and other metal components. Part of the trusted Norton Vulcan abrasive range, this cutting disc is an excellent everyday choice for fabrication shops, engineering companies, maintenance departments and metalworkers requiring dependable cutting performance. Key Features Genuine Norton Vulcan cutting disc Designed for stainless steel (Inox) and metal 230mm (9") diameter Thin 1.9mm cutting profile Fast and efficient cutting action Helps produce clean, accurate cuts Reduced material loss compared with thicker cutting discs Ideal for sheet, tube, bar and metal sections Suitable for professional fabrication and engineering applications Designed for use with compatible 230mm angle grinders Typical Applications Ideal for cutting: Stainless steel sheet and plate Stainless steel tube and pipe Metal bar and sections Fabricated components General steel and metalwork Suitable for use within welding and fabrication workshops, engineering, metalworking, maintenance and general industrial applications. Specification Brand: NortonRange: VulcanProduct Type: Thin Cutting / Slitting DiscMaterial Application: Stainless Steel (Inox) & MetalDiameter: 230mm (9")Thickness: 1.9mmApplication: Cutting / Slitting Please Note: Always ensure the disc dimensions and maximum operating speed are compatible with the angle grinder being used. Appropriate PPE and machine guarding should always be used when operating abrasive cutting discs.

Norton Abrasives Norton Vulcan Inox(Stainless) 4.5"(115mm) & 5"(125mm) Thin Cutting Disc 1MM Thick

The Norton Vulcan Inox Thin Cutting Disc is a professional-quality 1mm slitting disc designed for fast, clean and accurate cutting of stainless steel (Inox) and suitable metal applications. Available in both 115mm (4.5") and 125mm (5") diameters, these thin cutting discs are ideal for use with compatible angle grinders in welding, fabrication, engineering and metalworking environments. The ultra-thin 1mm profile provides a fast cutting action while helping to minimise material loss and reduce the amount of heat generated during the cut. The narrow kerf also makes the Vulcan Inox particularly useful where a clean, precise cut is required, helping reduce the amount of secondary finishing work. Part of the trusted Norton Vulcan abrasive range, these discs provide dependable performance for professional fabricators, welders and engineers carrying out regular stainless steel cutting operations. Key Features Genuine Norton Vulcan Inox cutting discs Designed for stainless steel (Inox) Ultra-thin 1mm cutting profile Available in 115mm (4.5") and 125mm (5") Fast and efficient cutting action Produces a narrow, clean cut Helps minimise material loss Reduced heat generation compared with thicker cutting discs Ideal for sheet, tube, pipe and fabricated components Excellent for welding and fabrication workshops Suitable for compatible angle grinders Available Sizes 115mm (4.5") x 1.0mm – Suitable for compatible 115mm angle grinders. 125mm (5") x 1.0mm – Suitable for compatible 125mm angle grinders. Typical Applications Ideal for cutting: Stainless steel sheet Stainless steel tube and pipe Stainless steel sections Thin metal components Fabricated assemblies General metalwork Suitable for welding, fabrication, engineering, maintenance, manufacturing and general metalworking applications. Specification Brand: NortonRange: Vulcan InoxProduct Type: Thin Cutting / Slitting DiscSuitable Material: Stainless Steel (Inox)Available Diameters: 115mm (4.5") & 125mm (5")Disc Thickness: 1.0mmApplication: Cutting / SlittingMachine Type: Compatible Angle Grinder The Norton Vulcan Inox 1mm Thin Cutting Disc is an excellent everyday choice for professionals requiring fast cutting, a narrow kerf and a clean finish when working with stainless steel. Please Note: Always select the correct disc diameter and specification for your angle grinder. Never exceed the maximum operating speed marked on the disc and always use appropriate PPE and machine guarding.

Norton Abrasives Norton Vortex Rapid Blend Disc 4.5"(115MM) Grade 5AM

Norton Vortex Rapid Blend Disc 4.5" (115mm) Grade 5AM The Norton Vortex Rapid Blend Disc 4.5" (115mm) Grade 5AM is a premium surface conditioning disc designed for fast material blending, cleaning, deburring and finishing on a wide range of metals. Engineered with Norton’s advanced Vortex abrasive technology, this high-performance disc delivers a consistent finish, long service life and exceptional productivity in demanding fabrication and engineering environments. The 5AM (Very Fine) grade is ideal for light blending, surface preparation and producing a smooth, uniform finish without significantly removing base material. Suitable for use on stainless steel, mild steel, aluminium and other non-ferrous metals, it is perfect for removing light oxidation, surface imperfections, weld discolouration and minor scratches while preparing surfaces for painting, coating or polishing. Designed for use with standard 115mm (4.5") angle grinders, the Norton Vortex Rapid Blend Disc provides excellent conformability, allowing it to follow contours and complex shapes while maintaining an even finish. Its non-woven abrasive construction resists loading, runs cooler than conventional abrasives and delivers consistent performance throughout the life of the disc. Features & Benefits Premium 115mm (4.5") surface conditioning disc. 5AM (Very Fine) grade for light blending and finishing. Advanced Norton Vortex abrasive technology for long-lasting performance. Produces a smooth, consistent surface finish. Ideal for cleaning, blending, deburring and surface preparation. Suitable for stainless steel, mild steel, aluminium and other metals. Non-woven construction resists loading and reduces heat build-up. Excellent flexibility for flat, curved and contoured surfaces. Compatible with standard 115mm angle grinders. Ideal for fabrication, engineering, maintenance and metal finishing applications. Ideal Applications Weld blending Surface conditioning Deburring Oxide and discolouration removal Preparing surfaces for painting or coating Satin finishing on stainless steel General fabrication and metalworking Whether you're blending welds, preparing metal surfaces or producing a high-quality satin finish, the Norton Vortex Rapid Blend Disc 4.5" (115mm) Grade 5AM offers the durability, consistency and performance professionals rely on for superior finishing results.

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

Milwaukee M18FPD3-0 Gen 4 Combi Drill Bare Unit

Milwaukee M18FPD3-0 Gen 4 Combi Drill  M18FPD3: 13mm Chuck Max Drilling Masonry - 16mm Max Drilling Steel - 16mm Max Drilling Wood - 89mm Max Percussion Rate - 0-33,000 BPM Max Torque - 158 NM No Load Speed Gear 1 - 0-500RPM No Load Speed Gear 2 - 0-2100RPM   Higher power efficiency under load with outstanding torque of 158 Nm Extremely compact design of 175 mm length for access into tight spaces AUTOSTOP™ control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up 13 mm metal chuck for quick bit changes and bit retention Fastest drilling and driving applications under load Brighter LED workspace illumination Fuel gauge displays remaining charge All metal reversible belt clip to hang your tool quickly and easily Individual battery cell monitoring optimises tool run time and ensures long term pack durability

Weld Star Weldstar Infinium Multi-Process Pulse Welder 4 In 1 200A MIG, AC/DC TIG & MMA

Weld Star 4 in 1 Multi Process Welder 200 Amp Package The Weld Star Infinium inverter multi process machine has been designed to incorporate the most advanced features and technology offering the operator a user friendly interface via the 5”LCD screen. Advanced IGBT multi-process inverter technology which is compact andlightweight at only 20KG PFC technology offering multiple advantages such as energy efficiencyand wide range input voltage from 95Vac – 265Vac Generator friendly Automatic dual voltage input detection Smart fan – reduces power consumption and intake of dust and fumes IP23 protection Built to EN-60974-1 and is fully compliant with the European CommissionRegulation 2019/1784, CE and UKCA With synergic MIG/MAG, welding parameters can be automatically selectedbased on material thickness and voltage with synergic curves for commonmaterials and wires Built in TIG welding features such as HF or Lift TIG, pre/post flow gastimes, 2T/4T, slope up/down and pulse, all to ensure excellent TIG weldingcharacteristics in both AC and DC Smart TIG function with advanced TIG welding features such as multi-wave,Q start and hybrid TIG, whilst still maintaining ease of set up for the user DC and AC MMA suitable for a wide range of electrodes Advanced MMA features such as pulse and automatic current regulationbased on electrode diameter Built in hot start arc ignition function which ensures excellent arc ignition inMMA for easier and more reliable arc starting with built in self adaptive arcforce technology which maintains the optimum MMA arc conditions duringoperation even with long welding cables In-built VRD (MMA and TIG mode only) Ability to save up to 10 stored programmes for quick set up Advanced error code menu for ease of fault and troubleshooting diagnosis Panel mounted USB connection for quick and easy firmware updates

3M Speedglas Adflo Pre-Filters Pk Of 5

The 3M Speedglas Adflo Pre Filters come in a pack of 5.   Enhance the performance and lifespan of your respiratory protection with the 3M 836010 Replacement Pre-filters. Designed to capture larger particles and extend the life of your main filters, these high-quality pre-filters help maintain optimal airflow and protection in demanding work environments. Key Features: ✅ Extended Filter Life: Traps larger particles before they reach the main filter, reducing clogging.✅ High-Efficiency Filtration: Helps improve respiratory protection by capturing dust, mist, and airborne contaminants.✅ Easy to Use: Designed for quick and simple installation onto compatible 3M filter systems.✅ Lightweight & Low Resistance: Ensures comfortable breathing without restricting airflow.✅ Pack of 10: Convenient multipack for regular replacements and ongoing protection. Specifications: Model: 3M 836010 Type: Replacement Prefilter Quantity: 10 Prefilters per Pack Compatibility: Designed for use with select 3M respiratory protection systems Ideal for welders, construction workers, and industrial professionals, the 3M 836010 Replacement Prefilters help maintain a clean air supply and ensure your respiratory protection performs at its best.

Cibo Actirox Inox Ceramic Fibre Discs 4.5"(115mm) & 5"(125mm)

The Cibo Actirox INOX Ceramic Fibre Disc is a high-performance abrasive specifically designed for aggressive grinding, weld removal and rapid stock removal on stainless steel and INOX materials. Featuring advanced ceramic abrasive grain, Actirox fibre discs provide an extremely effective cutting action for demanding stainless steel fabrication applications. The ceramic grain continually exposes fresh cutting edges as it wears, helping maintain a fast and consistent material removal rate throughout the working life of the disc. Available in 115mm (4.5") and 125mm (5") diameters, these fibre discs are ideal for use with compatible angle grinders and a suitable backing pad. The Actirox INOX range is particularly suited to professional stainless steel fabricators who require fast weld removal and high productivity when processing sheet, plate, tube, box section and fabricated components. Key Features Genuine Cibo Actirox INOX abrasive Designed specifically for stainless steel / INOX High-performance ceramic abrasive grain Available in 115mm (4.5") and 125mm (5") Aggressive and fast stock removal Excellent for stainless steel weld grinding Maintains an effective cutting action as the abrasive wears Suitable for demanding fabrication environments Ideal for edge preparation and deburring Fibre-backed construction for controlled grinding Suitable for professional engineering and metalworking Available in various grit sizes where applicable Available Sizes 115mm (4.5") 125mm (5") Typical Applications Ideal for: Stainless steel / INOX grinding Weld seam removal Weld dressing and blending Heavy stock removal Edge preparation Deburring Grinding fabricated components Surface preparation Stainless steel sheet and plate Tube and box section fabrication Specification Brand: CiboRange: Actirox INOXProduct Type: Ceramic Fibre DiscDisc Diameters: 115mm (4.5") & 125mm (5")Abrasive Grain: CeramicPrimary Material: Stainless Steel / INOXApplication: Grinding, Weld Removal & Stock RemovalMachine Type: Compatible Angle GrinderBacking Pad Required: YesAvailable Grits: Various, depending on selected option High-Performance Stainless Steel Grinding  

TIG Aesthetics By TICON Silicone TIG Trailing Shield

Why we love the trailing shield from TIG Aesthetics:  TIG Aesthetics and Ticon Industries are eager to announce the latest Innovation in our TIG welding lineup! The TIG Aesthetics Trailing Shield. It is the Ultimate solution for welding aerospace grade metals where an inert environment is required. Manufactured from high temperature silicone, the Trailing Shield withstands the heat absorbed by any #16 or 1" welding cup and will hold its structural integrity to 100+ amp welds. The Trailing Shield also includes a built in drag bar on the tail of the shield to assist in the prevention of direct heated material contact. -please note that the silicone body is meant to hover above and not make contact with the actual weld seam-  Our proven, multi-layer screen diffuser combined with the shower head diffuser fitting integrate seamlessly with the silicone while providing additional rigidity to the body of the shield; providing excellent argon diffusion to the weldment. The reinforced screen diffuser allows for the radius to be adjusted by slightly bending the stainless steel diffuser.  User setup tips and tricks: Included hose retention tab is designed to snap on to the back cap and align the argon inlet hose perfectly straight into the shield body, ensuring consistent results when manipulating torch angle during the weld process. (we recommend using TIG Aesthetics 6mm Argon Purge line) Recommended gas flow for the Trailing Shield is 15-20 SCFH *dependent on weldment and environment* Ensure a proper setup by running a test pass on some scrap material to solidify personal preference on flow and speed. Included in the TIG Aesthetics Silicone Trailing Shield Kit: Silicone trailer chassis - Red x 1Stainless Steel Mesh Diffuser x 1Titanium Shower Head Diffuser fitting x 1Titanium Hose Retention Tab x 1

TP Weld Tables TIG Storage Tube Filler Rod Divider

TEC Products Custom Made(In-House) Divider For TIG Filler Rod Storage Tubes 50MM Comes In Options Of 2Way, 3Way & 4Way Splits The Perfect Solution To Keep Your Different Sized Filler Rod Organized    Designed For Use With The Blue Demon TIG Storage Tubes (Will fit other makes with a 50mm diameter)

Furick BBW CIPPY Thermoplastic TIG Cup Kit 2.4MM

FULL VERSION BBW CIPPY With Brass Gas lens installed THERMOPLASTIC VERSION Eliminate accidental smashed cups with these fantastic thermoplastic Furick Cippy cups ** DO NOT Rest On A Hot Workpiece As The Cup Will Melt ** 

Beltit BF Powerfile 110V +1 Arm

Beltit BF Powerfile 110V with 1 Arm The Beltit BF Beltafile G finger file is a great all round machine. It benefits from a handle and motor which can be rotated through 360° allowing easy access into awkward angles. Machine Specification: Voltage 110v  Power unit: 570w  Weight: 1.9Kg The Beltit BF G5 is supplied with one arm for belts 533x13mm   Applications: Roughing, weld removal, de-burring, blending and dressing, the Beltit BF Beltafile belt grinders are perfectly suited to general fabrication work.

Beltit BF Powerfile 110V +3 Arm

Beltit BF Powerfile 110V with 3 Arm The Beltit BF Beltafile G finger file is a great all round machine. It benefits from a handle and motor which can be rotated through 360° allowing easy access into awkward angles. Machine Specification: Voltage 110v  Power unit: 570w  Weight: 1.9Kg The Beltit BF G5 is supplied with three arms for belts 533x13mm, 533x6mm, 533x3mm   Applications: Roughing, weld removal, de-burring, blending and dressing, the Beltit BF Beltafile belt grinders are perfectly suited to general fabrication work.

Cibo Finimaster Pro 230V Drum Sander Machine only in case

Cibo Finimaster Pro Drum Sander  This is the 230V, machine only option for the Finimaster Pro Drum sander, it is designed for high quality satin polishing as well as sheet metal fabrication graining. The large diameter wheels ensure a chatter free experience making it easier to get the high quality satin finish desired.  M14 thread ensures that wheel changes are efficient and allow the sander to get into the edges. Cast iron handle ensures an ergonomic grip and high level of visibility when working with flat and rounded surfaces. Reduction in consumable cost due to larger wheels and sleeves.  Better access + larger wheels + longer life + higher quality finish = Finimaster Pro When grain finishing use the abrasive sleeves and inflatable tyre followed by a wide range of tex and combination wheels to achieve the desired finish. Tube finishing require a switch over to the drive roller with the grip fixing belts to allow higher quality finish even in tight locations.    Use the Cibo Finimaster Pro Drum Sander with:  – The FMSB/M drive wheels for satin finishing and mirror polishing round rubes– Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre– Tex /combi flap brushes for satin finishing– Sisal / cotton / flannel polishing wheels for high quality mirror polishing  

Parker Duragrip 360A Spool Gun Euro Fitting 8Mtr

DURAGRIP SPOOL-ON MIG/MAG TORCH RANGE Spool-on guns are compact in design and offer a cost effective solution for low deposition Mig welding and precise control of soft wires SPECS:   Cooling Method -Air-Cooled Rating CO2 - 300A Rating Mixed Gas -270A Wire Size Steel -0.8-1.0mm Wire Size Aluminium -0.8-1.2mm Motor Voltage -24V and 42V Motor Life -1000 Hours Duty Cycle- 35%

TIG Aesthetics By Ticon Full Silicone Purge Plug Kit

Why We Love The Ticon Industries Full Purge Kit From Tig Aesthetics  Ticon Industries has teamed up with Tig Aesthetics to offer the ultimate solution for back purging. Manufactured out of high temperature silicone, these plugs can withstand the heat of a weld seam from 1″ away. Each plug comes with a multi layer stainless steel diffuser for eliminating turbulence inside the tube/pipe while maximizing the efficiency of argon consumed. To top it all off, we included our special Ticon touch and included our hyper lightweight titanium 0.5mm wall argon inlet tubes. Included in the Complete Silicone Purge Plug Kit: Exhaust Kit2.5″ Silicone Pipe Plug – Yellow x 23″ Silicone Pipe Plug – Green x 23.5″ Silicone Pipe Plug – Cyan x 24″ Silicone Pipe Plug – Blue x 2 Header Kit1.5″ Silicone Pipe Plug – Blue x 21.88″-2″ Silicone Pipe Plug – Magenta x 2 Turbo Manifold Kit1.25″ Silicone Pipe Plug – Magenta x 21.5″ Silicone Pipe Plug – Blue x 22″ Silicone Pipe Plug – Red x 2 Stainless Steel Mesh Diffuser x 18Titanium Argon Inlet Tubes x 9

Milwaukee M18FSAGV115XPDB-0 Vari-Speed 115MM Angle Grinder

Why WE Love The Milwaukee M18FSAGV115XPDB-0 Angle Grinder The Milwaukee M18 FSAGV115XPDB-0 is an 18V angle grinder, delivering corded performance similar to a 1200W grinder. It has a 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal, allowing for maximum control for every application. Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack, and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time, and durability on the jobsite.   Comes supplied as a bare unit (no batteries or charger included).   M18 FSAGV115XPDB-0X Features:  Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal Delivering corded performance similar to a 1200 W grinder RAPIDSTOP for fastest disc brake in less than 2 seconds and best user protection Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up Anti-vibration side handle for lower vibration Integrated FIXTEC system for tool-free wheel change Slim handle design Removable dust screen to prevent debris entrance, prolonging motor life 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite Flexible battery system: works with all MILWAUKEE M18 batteries   M18 FSAGV115XPDB-0X Specification:   Anti kickback protection: Yes  Article Number: 4933478773  Battery pack capacity (Ah): No batteries supplied  Battery type: Li-ion  Brake: Yes  Braking time [s]: < 2  Cutting depth (mm): 28 Disc diameter (mm): 115 Line lock out function: Yes No load speed (rpm): 3500 - 8500  No. of batteries supplied: 0 Soft start function: Yes  Standard equipment: Quick release safety guard, cutting guard clip, AVS side handle, flange, flange nut, spanner, dust screen  Supplied in: HD Box  Switch type: Paddle (Deadman) switch  Voltage (V): 18     What is included:  1x 18V Fuel 115mm Angle Grinder with Paddle Switch (Body Only) 1x HD Box

Furick Markout Pro Mandrel Bend Markout System

Furick Markout Pro Mandrel bend system is the industries First all in 1 Patent Pending system that allows the user to make accurate and repeatable cut lines on your mandrel bends ranging from 3/4 inch to 4 inch in diameter in all Centerline radiuses from 1D up to 7 inch.

Wilkinson Star Weld Star ER120S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Precision layer wound for superior wire feeding characteristics. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - G 89 4 M21 Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G

Wilkinson Star Weld Star ER110S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Precision layer wound for superior wire feeding characteristics. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list

Wilkinson Star Weld Star ER80S-Ni1 Low Temp MIG Wire 15KG 300MM Reel

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Precision layer wound for superior wire feeding characteristics. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1

Time Saving Kit For Mirror Polishing Stainless Steel Box

  Weld Removal and Mirror Polishing Stainless Steel Sheet TSK04 contains all the product you need to: Grind stainless steel tig weldsRemove all grind marksCreate a high reflection mirror polish finish. For detailed guidance and tips, take a look at our Time Saving Kit 04 blog. TSK04 – Instructions – Full stainless steel abrasive and polishing instructions come inside the box. The basic process includes: Grind stainless steel tig weld with the FX87GR discRefine the finish with Trizact and unitised discsMirror polish with felt and cotton products and our PV/101 and PV/102 soaps. TSK04 – Videos – You will receive a web-link to the full TSK04 videos which gives you a detailed breakdown of the complete process. From weld grindingHow to refine the grind linesCorrect machine speedsThe right abrasives for each stepAbrasive techniquesCreating the perfect mirror polish finish Use the right speed: For optimum performance the TSK04 kit is best used with a variable speed grinder

Cibo Time Saving Kit For Satin Finish Stainless Mitre Corners

Brush Finishing of Flat Stainless Steel and Mitre cornersTSK01 contains all the products you need to: Remove a stainless steel tig weld.Refine the grind lines.Restore a high quality satin finish and create perfect mitre corners. For detailed guidance and tips, take a look at our Time Saving Kit 01 blog. TSK01 – Instructions – Full stainless steel finishing instructions inside every box. The basic process includes: Remove the stainless tig weld with a FX87GR Cibo Ceramic disc.Refine the finish with 3M Trizact grip discs.Use the Cibo Inoxitape to create a perfect mitre finish.Use our FMCM abrasive combi brushes for the satin finish. TSK01 – Videos – You will receive a web-link to the full TSK01 video which gives you a detailed breakdown of the complete process: How to remove the weld.How to refine the grind lines.Correct machine speeds.The right abrasives for each step.Abrasive techniques.Creating a professional brush finish. Use the right speed: For optimum performance the TSK01 kit is best used with a variable speed grinder

Cibo SLIN Metal Grinding Disc Top Line 4.5"(115mm) - 9"(230mm)

The Cibo SLIN Metal Grinding Disc Top Line is a professional abrasive grinding disc designed for efficient metal grinding, weld removal, edge preparation and general fabrication work. Part of the Cibo Top Line range, the SLIN grinding disc is designed to provide dependable stock removal and consistent grinding performance when working with suitable metal applications. Available in sizes ranging from 115mm (4.5") through to 230mm (9"), the range provides options for everything from everyday fabrication and workshop grinding through to heavier-duty applications using larger angle grinders. The robust abrasive construction makes these discs ideal for removing excess weld material, dressing fabricated components, preparing edges and carrying out general surface grinding. They are an excellent workshop consumable for professional welders, fabricators, engineers and metalworkers. Key Features Genuine Cibo SLIN Top Line grinding disc Designed for metal grinding applications Excellent stock removal performance Ideal for grinding and dressing welds Suitable for edge preparation Robust construction for professional use Consistent grinding performance Suitable for fabrication and engineering environments Multiple diameters available Designed for use with compatible angle grinders Available Sizes Available in a range of diameters from: 115mm (4.5") to 230mm (9") Select the required disc size from the available product options. Typical Applications Ideal for: Weld grinding and removal Dressing welded joints Metal stock removal Edge preparation Deburring Surface grinding General fabrication Engineering and maintenance Specification Brand: CiboRange: Top LineProduct: SLINProduct Type: Metal Grinding DiscDiameter Range: 115mm (4.5") – 230mm (9")Application: Metal Grinding & Stock RemovalMachine Type: Compatible Angle Grinder The Cibo SLIN Top Line Metal Grinding Disc is a dependable choice for professional users requiring effective material removal, durability and consistent grinding performance across everyday metalworking applications. Please Note: Select the correct disc diameter and specification for your angle grinder and application. Never exceed the maximum operating speed marked on the abrasive disc and always use appropriate PPE and machine guarding.

BÖHLER Bohler Spezial D Premium 7016 Welding Electrodes Vac-Packed

Premium quality, Premium low hydrogen 7016 welding electrode. The Böhler Spezial D Premium 7016 Welding Electrodes are a high-performance solution designed for demanding welding applications. Engineered for reliability and precision, these low-hydrogen electrodes deliver exceptional results in structural steel and high-strength welding tasks. Key Features: Low Hydrogen Content: Minimizes the risk of hydrogen-induced cracking, ensuring high-integrity welds in critical applications. Exceptional Arc Stability: Provides a smooth and stable arc for precise control, even in challenging conditions. Vacuum-Packed for Freshness: Electrodes are vac-packed to protect against moisture absorption, ensuring optimal performance straight out of the package. All-Position Welding: Designed for use in all positions, including vertical and overhead, making them versatile for various welding projects. High-Quality Weld Deposits: Produces clean, strong welds with excellent mechanical properties, meeting the demands of rigorous applications. Wide Material Compatibility: Suitable for welding mild steels, structural steels, and high-strength materials. Applications: Construction and infrastructure projects Pressure vessels and boiler fabrication Heavy-duty structural steel welding Shipbuilding and offshore industries Main Features: Special coating technology provides a flat regular and finely rippled surface Stable arc characteristics  Exceptional slag detachability Notch-free wetting behavior Can be welded in DC and AC mode Length, 2.5MM - 350MM, 3.2 & 4.0MM -450MM Classification, AWS A5.1: E7016 Current: 70 to 130 amps. Weight:2.5MM - 18KG CARTON (9 x 2KG PACKS) Weight:3.2MM - 27KG CARTON (9 x 3KG PACKS)  

5 piece Carbide Burr Set – 5 Shapes – For Use On Hard Metals

5 piece Carbide Burr Set – 5 Shapes – For Use On Hard Metals Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Titanium and Cobalt alloys, composites and high density fibreglass. With a range of different burrs Carbide Burr Set 1 is ideal for welders and metal fabricators. Burr 1: Cylindrical burr, 9.5 mm diameter, x 19 mm length, shape A HMC/A61020/6Burr 2: Ball shape, 12.7 mm diameter, shape D HMC/D61212/6Burr 3: Rounded tree shape, 12.7 mm diameter x 25 mm length, shape F HMC/F61225/6Burr 4: Flame shape burr, 8 mm diameter, 19 mm length, shape H HMC/H60820/6Burr 5: Rounded cone shape, 8 mm diameter, 22 mm length, shape L HMC/L60822/6 If you want to work on aluminium and non-ferrous metals we recommend our set HMC/SET/02 

HMC Carbide Burr Set 5 Piece 5 shapes for Welding Preparation

HMC Carbide Burr Set – 5 Piece (5 Shapes) for Welding Preparation SET04 – Versatile Metal Shaping & Finishing The HMC Carbide Burr Set SET04 is a high-quality, professional-grade 5-piece kit designed specifically for welding preparation, metal shaping, and finishing applications. Featuring five essential burr shapes, this set provides the versatility needed to tackle a wide range of fabrication tasks with precision and efficiency. Manufactured from durable tungsten carbide with a diamond cut profile, each burr delivers fast material removal with smooth control, making it ideal for use on steel, stainless steel, titanium, and cobalt alloys. The selection of shapes allows for effective access to tight areas, enabling users to open up cracks, clean weld roots, and refine fillet welds with ease. () Each burr is fitted with a standard 6mm shank, ensuring compatibility with most die grinders and rotary tools, while the robust construction ensures long service life even under demanding workshop conditions. Included Shapes: Bull nose (rounded cylinder) for general shaping Teardrop for contouring and access Rounded tree for curved surfaces Pointed tree for precision work in tight areas Flame shape for blending and finishing Key Features: 5-piece set with essential burr shapes for versatility Diamond cut tungsten carbide for efficient cutting performance Suitable for steel, stainless steel, titanium, and cobalt alloys Ideal for weld prep, deburring, shaping, and finishing 6mm shank compatible with standard die grinders Durable construction for long-lasting use Designed for welders and metal fabricators, the HMC SET04 Carbide Burr Set provides the flexibility and performance needed to achieve clean, precise results across a wide range of applications. Includes: Burr 1: Bull Nose burr, 9.5 mm diameter, x 19 mm length, shape CBurr 2: Teardrop shape, 9.5 mm diameter, shape EBurr 3: Rounded tree shape, 9.5 mm diameter x 19 mm length, shape FBurr 4: Pointed Tree shape burr, 12.7 mm diameter, 19 mm length, shape GBurr 5: Flame shape,12.7 mm diameter, 32mm length, shape H

Cibo TEX Ultra Fine S 600 grit Handpad 224mm x 158mm

“Tex nonwoven sheets 9″ long x 6” wide :    Grade: UFS 600 – Ultra Fine Silicon Carbide – grey  Use for paint denibbing and keying”

Cibo TEX Super Cutting Handpad 224mm x 158mm

Tex nonwoven rolls and sheets :    Grade: SC – Medium Aluminium oxide – brown / tan  Use for grain finishing of stainless steel and blending – 240 grit

Cibo TEX Medium A Handpad 224mm x 158mm

Tex nonwoven rolls and sheets :     Grade: AM – Medium Aluminium oxide – dark red / maroon  Use for grain finishing of stainless steel and blending – 240 grit (softer than Med S finish)

Cibo TEX General Purpose Handpad 224mm x 158mm

Tex nonwoven rolls and sheets :    Grade: GP – General Purpose – greenFor cleaning

Cibo TEX Coarse A Handpad 224mm x 158mm

Coarse A (aluminium oxide abrasive) handpads 9″ x 6″ Colour – dark red / brown Use for coarse grain finishing of stainless steel

Ultima TIG-CUT Precision Tungsten Grinding & Cutting System

Ultima TIG-CUT Precision Tungsten Grinding & Cutting System The safe and environmentally friendly way of grinding and cutting your tungsten electrodes in perfect angles and precise length for TIG welding.Like the well-known and well-documented ULTIMA-TIG, the ULTIMA-TIG-CUT grinds your tungsten electrodes, but it also enables you to cut the electrodes in the precise length needed. The grinding and cutting take place in a closed chamber, using liquid to cool the diamond discs and the electrode. In addition, the toxic grinding and cutting dust is collected safely.The high grinding speed combined with liquid cooling of the diamond disc and the electrode ensures an even and polished surface and prevents overheating of the electrode.Ultimate welding results are achieved, using the unique electrode holder which centres the tungsten electrode perfectly. The electrode holder and the Stick-out adjustment ensure a minimum waste of the tungsten electrodes during grinding.The cutting device has multiple adjustment options to ensure the precise length of the electrode tip. You can grind and cut the electrode without removing the electrode from the holder, making handling as easy as possible.The ULTIMA-TIG-CUT lets you produce the exact angle and length of the tungsten electrode needed for any specific welding work, incl. robotic and orbital welding. Set up the grinder and cutter once, and re-produce the same electrode over and over. SpecificationElectrode size: Ø 0.8 – 4 mmMin. length: 15 mm standard (7 mm with special clamps)Angles: 7.5° – 90° grinding angle (equal to 15° – 180° tip angle)Cutting length: 7 – 175 mm tip lengthMotor: 110v 50Hz - 280WSpeed: 8500 rpmGrinding speed: 44 m/secUnit IncludesUnit complete with table, diamond discs and grinding liquidElectrode holderElectrode clamps for Ø1.6, 2.4 and 3.2 mm electrodes for grindingTip clamps for Ø1.6, 2.4 and 3.2 mm electrodes for cutting (Clamps are available for other diameters)

Pferd Polifan Z SGP Curve L Steelox Flap Disc 4.5"(115mm) & 5"(125mm) 8MM Radius

Pferd Polifan Z SGP Curve L Steelox Flap Disc - 8MM Radius High-performance flap disc for maximum stock removal on steel and stainless steel (INOX). The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. Itis the only flap disc in the world that has flaps on both the grinding side and on the rear side, as well as on the radius.   Advantages: High stock removal rate ensures fast work progress and therefore significant wage cost savings. Precise and optimum grinding of the fillet weld geometry. Outstanding tool life when working on fillet welds. Materials that can be worked: Stainless steel (INOX) Steel Applications: Deburring Chamfering Work on edges Weld dressing Work on fillet welds

Pferd Polifan Z SGP Curve M Steelox Flap Disc 4.5"(115mm) & 5"(125mm) 5MM Radius

Pferd Polifan Z SGP Curve M Steelox Flap Disc - 5MM Radius High-performance flap disc for maximum stock removal on steel and stainless steel (INOX). The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. Itis the only flap disc in the world that has flaps on both the grinding side and on the rear side, aswell as on the radius.   Advantages:■ High stock removal rate ensures fast work progress and therefore significant wage cost savings.■ Precise and optimum grinding of the fillet weld geometry.■ Outstanding tool life when working on fillet welds. Materials that can be worked: Stainless steel (INOX) Steel Applications: Deburring Chamfering Work on edges Weld dressing Work on fillet welds

Mini Class 5 & 7 Front Indicator Blank Panel

Mini Front Indicator Blank Panel – Class 5 & 7 Autograss Mini Pickups The Mini Front Indicator Blank Panel is a practical replacement panel commonly used on Class 5 and Class 7 Autograss Mini Pickups, providing a neat and durable solution for blanking off the original front indicator aperture. Manufactured from 1.5mm Zintec steel, the panel offers excellent strength and durability while retaining a lightweight construction suitable for competition vehicles. The Zintec finish also provides improved corrosion resistance and creates a good surface for further preparation and painting as part of your race car build. Ideal for new Autograss builds, repairs, restorations or replacement bodywork, these panels provide a straightforward way to achieve a clean finish to the front of your Mini Pickup. Key Features Commonly used on Class 5 & Class 7 Autograss Mini Pickups Designed to blank off the front indicator aperture Manufactured from 1.5mm Zintec steel Strong and durable construction Good corrosion resistance Suitable for welding and fabrication Ideal for new builds, repairs and replacement body panels Can be prepared and painted to match the vehicle Please Note Sold individually. If you require a pair for both sides of the vehicle, please order a quantity of 2. *All Designed And Manufactured In North Yorkshire*

Milwaukee 1.36KG (3LB) Club Hammer

Milwaukee 1.36KG (3LB) Club Hammer SMOOTH & MILLED. 3lbs / 1.36kg club hammer. Duel Face Versatility: Milled face provides additional grip and minimizes movement of face when striking chisels or large nails, the smooth face prevents damage to struck objects. Reinforced Overstrike Protection: Increases durability in the most common failure point. Fiberglass handle with over molded grip: Provides durability with improved grip capacity and comfort. Lanyard Hole: Easily comply with safety regulations working at height.

Fronius TTB 220P G F ML /70°/L65 Universal Parts Flexi TIG Torch Head

The modular construction of the new TIG Multilock welding torches means they can be individually adapted to almost any customer requirements. The torch hosepack can be equipped with the appropriate torch bodies in just a few steps, so it can be adjusted to the welder’s personal preferences as well as the relevant application. The torch bodies are available in various power categories from 160–300 A and with either screw or push-on type gas nozzles. This Is For The TIG Torch Flexi Head Only Torch Handle And Leads NOT Included 

BÖHLER Bohler Thermanit 308L TIG Filler Wire 5KG Pack

Bohler Thermanit E308L TIG Filler Wire 5KG Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion-resistant similar to matching low-carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. High toughness at subzero temperatures as low as –196 °C (–321 °F). For joning and surfacing applications with matching and similar – stabilized and non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels/cast steel grades. For joining and surfacing work on cryogenic matching / similar austenitic CrNi(N) steels / cast steel grades.ClassificationsAWS A5.9: ER308LEN ISO 14343-B: SS308LEN ISO 14343-A: W 19 9 L

TEC Products Cibo Stainless Steel Polishing Kit 4.5"(115mm)

TEC Products Own Put Together Stainless Polishing Kit, Tried & Tested By Many Of Our Customers To Give Top Results  Kit Consists Of: 1 x Cibo 4.5"(115mm) Unitised Grade 5 SAG Discs 1 x Cibo 4.5"(115mm) Felt Grinder Discs  1 x Pink Polish/Buffing Compound Bar  When used together this kit gives the ultimate mirror polish finish on stainless steel 

CK Worldwide CK 3 Series Complete Pyrex Gas Saver Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 3 Series Complete Pink Ceramic Cup Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 2 Series Complete Pyrex Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available.   Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body. Part # Description Quantity 2P8GS CK #8 Pyrex Cup - 2/3 Series Gas Saver, 12.7mm bore x 32.6mm length 1 2C040GS CK Wedge Collet - 2 Series Gas Saver, 1.0mm 1 2HSGS CK Standard Heatshield - 2 Series Gas Saver 1 2CBGS CK Standard Collet Body - 2 Series Gas Saver, One Size Fits All 1 TAS040GS CK Tungsten Adapter - 2/3 Series Gas Saver, 1.0mm 1

CK Worldwide CK 2 Series Complete Pink Ceramic Front End Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

Rotabroach Element 14 Multi-Purpose Chop Saw Blade

Rotabroach Cermet Blades Cermet blades produce a clean, cool cut with minimal vibration. Cermet tipped, they offer 20% longer life compared to abrasive cutting discs and perform 40% better than TCT blades. A practically spark free, burr free cut. Cermet tipped blades Lasts up to 20 times longer than conventional abrasive discs Up to 40 percent better life than TCT blades Triple chip design for added durability Clean, cool cut with minimal vibration and sparks

Rotabroach Raptor M2AL 25MM Short Cutter Mag Drill Bit

Rotabroach M2AL Raptor Cutters Rotabroach M2AL Raptor cutters have a unique and exclusive geometry that you will only find on genuine Rotabroach cutters. Our M2AL Raptor cutters have been designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter. Manufactured from M2AL material. Heat treated to a higher temperature, ensuring a greater hardness of cutter.

Rotabroach Commando 40 Magdrill 110V & 230V

Rotabroach Commando 40 Magdrill 110V & 230V Features: The Commando 40 is Rotabroachs' most economical machine Suitable for drilling up to 40mm diameter by 50mm depth Engineered & Made in the UK Variable speed control Powerful 1100W motor Mechanical clutch protection Lightweight - only 14.2kg 13mm drill chuck option supplied Overload protection & fixed guard

Bessey Tools Bessey Welders Angle Mitre Clamp 120MM x 2 Box Section Max Input

Bessey Welders angle clamps WSM12 Automatic adjustment to workpieces of various thicknessesSturdy jaws and base plate made from high-quality cast ironThe copper-plated spindle prevents welding splatter from stickingPrecise 90 degrees -angles   Specs Weight (kg) 7.80 Current passage max. (mm) 100 Jaw height (mm) 61 Jaw length (mm) 120 Opening min/max (mm) 2 x 120

Bessey Tools Bessey Welders Angle Clamp 90MM x 2 Capacity

Bessey WSM-9 Welder’s Angle Clamp – 90° Precision Clamping for Welding & Fabrication Accurate and Secure Corner Clamping for Right-Angle Joints The Bessey WSM-9 Welder’s Angle Clamp is specifically designed to deliver fast, precise, and repeatable 90° clamping for a wide range of welding and fabrication applications. Engineered with professional welders and metalworkers in mind, this heavy-duty clamp allows for accurate alignment of materials at right angles, while keeping workpieces clear for welding thanks to its open corner design. Ideal for T-joints, miter joints, and box frame assemblies, the WSM-9 is a reliable and rugged workholding solution that increases efficiency, improves weld quality, and enhances repeatability during fabrication. Key Features: Precise 90° Clamping Perfect for creating square corners and right-angled joints with high accuracy in steel fabrication and welding setups. Open Corner Design Provides unobstructed access to the joint for tack or full welding without removing the clamp—ideal for efficiency and clean weld seams. Independently Adjustable Spindles Each clamping arm has its own spindle, allowing for secure clamping of different material thicknesses on both sides of the corner. Heavy-Duty Construction Made from durable cast iron and steel components, ensuring long service life in tough industrial environments. Self-Centering Action Automatically aligns workpieces with symmetrical clamping force, reducing the need for time-consuming setup adjustments. Technical Specifications: Clamping Angle: 90° Clamping Capacity: Up to 100mm (3.94”) Throat Depth: 75mm Material Compatibility: Round, square, or flat stock Spindles: Two independently adjustable screw spindles Material: Cast iron frame with precision steel spindles Weight: Approx. 4.5 kg Applications: Welding and metal fabrication Frame construction and square assembly Fixture building and structural alignment Suitable for steel, stainless, and aluminium components Perfect for workshops, maintenance teams, and production environments Why Choose the Bessey WSM-9 Angle Clamp? When precision and access matter, the WSM-9 is a game-changer. Designed to keep corners square while offering open access for welding, this clamp saves time, reduces material movement, and improves finished results. Whether you're working on frames, boxes, or structural components, the Bessey WSM-9 delivers strength, control, and accuracy every time.

Bessey Tools Bessey All Steel GS Classix Screw F Clamp

Bessey GS Classix All Steel Screw F Clamp Robust, Reliable Clamping Power for Everyday Workshop Use The Bessey GS Classix Screw F Clamp delivers dependable, high-strength clamping performance in a durable and ergonomic design. Engineered for demanding fabrication, welding, woodworking, and general workshop applications, this versatile clamp is constructed from fully tempered steel, providing excellent resilience, wear resistance, and long-lasting service life. With a clamping force of up to 5000N, the GS Classix ensures secure, slip-free holding for a wide range of materials and projects. Its fixed jaw and sliding arm are built for precision and strength, while the tommy bar handle allows easy, controlled application of clamping pressure without excessive effort. Key Features: High Clamping Force – Up to 5000N Delivers strong, secure clamping pressure ideal for demanding fabrication or assembly tasks. All-Steel Construction Fixed jaw and sliding arm are made from fully tempered steel for maximum strength and long service life under heavy use. Durable Surface Finish Zinc-coated parts resist rust and wear, even in tough shop conditions. Tommy Bar Handle Classic sliding pin design offers simple and efficient torque transfer, even in tight spaces. Ribbed Profile Rail Provides enhanced stability and helps prevent slippage under pressure. Non-Slip Pressure Pad Swivelling pressure pad adjusts to uneven surfaces and materials, enhancing versatility and grip. Technical Specifications (Typical Range): Clamping Force: Up to 5000N Clamping Capacity: Various sizes available (e.g. 200mm, 300mm, 500mm etc.) Throat Depth: Typically 100mm Material: Tempered steel Handle Type: Tommy bar Rail Profile: Ribbed for extra grip and alignment Ideal For: Welding and fabrication setups Joinery and woodworking Assembly and maintenance tasks Metal and plastic work Workshop and industrial use Why Choose the Bessey GS Classix? Backed by Bessey’s reputation for German engineering and quality, the GS Classix series combines affordability with exceptional performance and durability. Whether you're clamping during tack welding, gluing in carpentry, or holding components in place during assembly, this clamp offers reliable grip, easy handling, and rugged construction—making it a staple tool for professionals and DIY users alike.

Bessey Tools Bessey CDFC Forged G Clamp

Clamp Features: Bessey C-clamp CDF403C 75/60 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF404C 105/85 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF406C 150/100 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF408C 205/125 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF410C 245/150 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking

Cibo FOV Ceramic Grit Flexi-Edge Flap Discs 4.5"(115mm) & 5"(125mm)

The CIBO FOV Ceramic Grit Flexi-Edge Flap Disc is a high-performance abrasive disc designed to provide excellent grinding, blending and finishing performance, particularly when working around edges, corners and difficult-to-access areas. Featuring a high-performance ceramic abrasive grain, the FOV provides an aggressive cutting action for efficient material removal while maintaining excellent control during fabrication and finishing work. The Flexi-Edge design provides increased flexibility around the edge of the disc, allowing the abrasive flaps to follow the profile of the workpiece more effectively than a conventional rigid grinding disc. This makes it particularly useful for weld blending, edge grinding, contour work and finishing fabricated components. Available in both 115mm (4.5") and 125mm (5") diameters, the CIBO FOV is an excellent choice for professional welders and fabricators looking for a versatile ceramic flap disc capable of tackling demanding metalworking applications. Key Features Genuine CIBO FOV Flexi-Edge flap disc High-performance ceramic abrasive grain Available in 115mm (4.5") and 125mm (5") Flexible edge for improved access to profiles and contours Excellent for weld grinding and blending Fast and efficient material removal Ideal for edge and corner work Suitable for deburring and surface preparation Excellent control when finishing fabricated components Progressive flap wear exposes fresh abrasive Designed for professional fabrication and engineering use Available Sizes 115mm (4.5") – Suitable for compatible 115mm angle grinders. 125mm (5") – Suitable for compatible 125mm angle grinders. Select the required disc diameter and grit from the available product options. Typical Applications Ideal for: Weld grinding and blending Edge grinding Corner and profile work Grinding fabricated components Deburring Surface preparation Contour finishing Removing excess weld material General metal fabrication Specification Brand: CIBOProduct: FOVProduct Type: Flexi-Edge Flap DiscAbrasive: Ceramic GritAvailable Diameters: 115mm (4.5") & 125mm (5")Design: Flexible EdgeApplication: Grinding, Weld Blending, Edge Work & Finishing Ceramic abrasive, typically giving 3 times the life of zirconium equivalents. Machine Type: Compatible Angle Grinder The CIBO FOV Ceramic Grit Flexi-Edge Flap Disc is an excellent choice where a conventional flap disc cannot easily reach, combining aggressive ceramic cutting performance with additional edge flexibility for greater control when grinding and finishing complex fabricated components. Please Note: Select the appropriate grit for the required stock removal and finish. Always ensure the disc diameter, specification and maximum operating speed are compatible with your angle grinder and use appropriate PPE and machine guarding.

Cibo Inoxiclean Stainless Cleaner 400ML

Description: New, improved InoxiClean stainless steel protector spray. SPIC will remove grease marks and fingerprints from brushed stainless steel, aluminium, metal, plastic and ceramic tiles quickly and easily. Leaving a grease free protective film, to protect the surface from fingerprints and grease marks. Inoxiclean (SPIC) contains an additional active ingredient to remove dirt even more effectively whilst the new foaming action ensures complete visiblity of the area covered which in turn reduces the amount of spray needed.Application: Spray the Inoxiclean onto the workpiece and wipe off with a soft micro fibre or flannel cloth to leave a clean, grease free surface.

Cibo Stainless Steel Restoration Kit - Inoxiclean

Applications:  Despite its name stainless steel is vulnerable to attack from atmospheric, salt and chemical attack which can leave the surface tarnished. This kit contains everything you need to restore the finish to look like new. The cleaning solution is environmentally friendly and so can be used externally without fear of causing pollution or contamination. It can also be used on non-ferrous metals such as brass and copper. Typical applications include bollards, hand-rails, sinks, exhaust covers and ship fitments. Specification: 100% biodegradable solution Kit packed in carton includes: 500ml spray solution 8 non-woven cleaning pads 1 handle for pads 2 microfibre cloths in 2 grades 3 pairs disposable gloves

Hypertherm Powermax 45XP Plasma Torch Cutting Shield 220818

Hypertherm 220818 Cutting Shield for Powermax 45XP Protect your torch and maintain cut quality with the Hypertherm 220818 Cutting Shield, designed for the Powermax 45XP plasma cutting system. This accessory helps stabilize the arc during drag-style cutting and shields the nozzle from contact with the workpiece — ideal for high-speed, low-clearance applications. Key Features: Compatible With Powermax 45XP: Engineered to fit seamlessly with the Powermax 45XP torch head. Arc Stabilization: Helps maintain consistent arc height and reduces dross by keeping the nozzle from contacting the work surface. Durable Design: Crafted from robust materials to withstand high heat, sparks, and abrasive environments. Easy to Install & Replace: Simple mounting design lets you install or swap shields quickly, minimizing downtime. Drag-Cutting Capability: Enables drag-style cutting (sliding the shield across the work surface), helpful for tight corners and tight-tolerance jobs. Hypertherm 220818 Cutting Shield For use with Powermax 45XP/65/85/105

Hypertherm Powermax 45XP Plasma Torch Electrode Pack Of 5

Product Description The Hypertherm Powermax 45XP Electrode (Pack of 5) offers premium performance and reliability for your plasma cutting needs. Crafted with precision and using high-quality materials, this electrode is designed to deliver consistent arc stability, long life, and clean cuts—even in tough industrial applications. Key Features & Benefits: High Durability & Longevity Each electrode is manufactured from high-grade copper alloy, optimized for thermal and electrical conductivity. This ensures the electrode can endure prolonged use and resist degradation under intense conditions. Consistent Arc Quality These electrodes maintain a stable arc, which contributes to cleaner cuts, reduced dross, and less secondary finishing. Reliable performance helps increase throughput and reduce waste. Optimized for Powermax 45XP Designed specifically for use with Hypertherm’s Powermax 45XP plasma cutting system, these electrodes align perfectly with your torch’s geometry and power requirements. That compatibility helps ensure optimum cutting speeds and precision. Ease of Replacement The electrode design allows for quick swaps in the field. Minimizing downtime is critical in industrial and fabrication settings, and this pack-of-5 supply gives you on‑hand spares ready to go. Cost-Effective Pack Solution Buying in a 5-pack offers cost savings over buying singles, giving you better value and ensuring you always have spares available. Technical Specifications (Typical / Approximate) SpecificationValue / Range Compatible Torch Hypertherm Powermax 45XP Material High-conductivity copper alloy Pack Quantity 5 electrodes Part / Model Number 220842 (or equivalent) Operating Environment Industrial, workshop, fabrication, sheet and plate cutting Suitable for the following models: Powermax 45XP Powermax 65 Powermax 85 Powermax 105   * Supplied In A pack of 5  

Hypertherm Duramax 75 Degree Hand Torch For Powermax 65/85/105

Product description   Hypertherm Duramax  hand cutting plasma torch for Powermax 65, 85, 105 plasma cutter, part number 059473.Designed for durability and reliability with Spring Start™ technology. Duramax torches are available in two hand torch styles, two machine torch styles and three robotic torch styles and can be used for applications up to 105 amps.   75 degree head, used in plasma cutting and gouging applications, including quick fit connector.All Torch Lengths are supplied without consumables.

Hypertherm Duramax 15 Degree Hand Torch For Powermax 65/85/105

Hypertherm Replacement Duramax hand cut plasma torch for Powermax 65, 85, 105 plasma cutter, with 15 degree head  Hypertherm duramax plasma cutting torches are fitted with a snap in quick connector for easy install and removal. Designed for durability and reliability with Spring Start™ technology. Duramax torches are available in two hand torch styles, two machine torch styles and three robotic torch styles and can be used for applications up to 105 amps.   This torch has a 15 degree head , used in plasma cutting and gouging applications, including quick fit connector, available in 3 lengths supplied without consumables. 7.6Mtr   part number 059470 15.2Mtr part number 059471 22.8Mtr part number 059472   All torch lengths are supplied without consumables

Hypertherm Duramax Lock 75 Degree Hand Torch For Powermax 45 XP

Product description Hypertherm® Duramax™ Lock Hand Torch Assembly features 75 deg head.Torch is compatible with Powermax45 XP.Does not include consumables. Available In 6.1Mtr & 15.2Mtr Lengths

Kemppi Contact Tip For FE/MMT/PMT/MMG 20-25 Torches

Kemppi Contact Tip – For FE/MMT/PMT/MMG 20–25 Torches The Kemppi Contact Tip for FE, MMT, PMT, and MMG 20–25 series torches is a precision welding consumable engineered for optimal electrical transfer and dependable performance. Designed to exacting standards, this contact tip ensures consistent wire feeding and stable arc characteristics, helping to deliver smooth, high-quality welds in MIG/MAG applications. Manufactured from durable, wear-resistant materials, the contact tip provides excellent conductivity and extended life, even under heavy use in fabrication and industrial welding environments. Easy to install and replace, it’s an essential component for maintaining productivity and reducing downtime on the shop floor. Key Features: Compatible with Kemppi FE, MMT, PMT, and MMG 20–25 torch series Precision-engineered for stable arc performance and smooth wire feed Excellent electrical conductivity Long-lasting, wear-resistant construction Quick and easy replacement Ideal for MIG/MAG welding in production and workshop settings ** Packed in 10's **  

Optrel E600 Sphere Series Replacement Front Outer Lens (Pk Of 5)

Optrel's Unique Front Cover Lens. Suits all e600 Sphere Series Headshields and Optrel OSE/Satellitee640 e650 e670 e680 OSE Satellite e684 Vega View 2.5 and Crystal 2.0.

Hypertherm Powermax 105 Plasma Cutter With CPC Port & 7.6Mtr Hand Torch

Powermax105 plasma cutter The Powermax105® plasma system has the duty cycle and performance needed for tough industrial cutting and gouging jobs. Delivering superior clean cut capabilities on 32 mm (1-1/4") thick metals, it also offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure. Seven Duramax™ torch styles provide versatility for hand cutting, portable automation, X-Y table cutting, and robotic cutting and gouging. Has Output Port For CNC Plasma Tables 

Hypertherm Powermax 45 XP Plasma Cutter Package 240V C/W 6.1M Torch

Powermax45 XP plasma cutter The Powermax45® XP delivers increased cut capacity – up to 16 mm (5/8″) metal – as well as faster cut speeds, and automatic gas adjustment for quick, simple setup and operation. Duramax® Lock torches support handheld and mechanized cutting of a wider range of metal thicknesses, along with precision gouging such as spot weld removal, and marking capabilities.

Hypertherm Powermax 30 AIR Plasma Cutter Package With Built-In Compressor

Powermax30 AIR plasma cutter Despite its small size, the Powermax30® AIR delivers big performance. This small air plasma cutter — the smallest, lightest handheld plasma cutter in its class — includes its own built-in air compressor. That's right, it's a small plasma cutter with a built-in compressor so you can use the Powermax30 AIR anywhere there’s single-phase power. Just plug it in, attach the work clamp and you’re ready to cut. It's even dual-voltage. You can use it as a 120 V plasma cutter or at 240 V. Regardless of which power input (120 V or 240 V) you choose, we think you'll agree the Powermax30 AIR is the best plasma cutter with built-in compressor available today. This Package Includes The Following:   Power supply, AIR T30 hand torch with 4.5 m lead and work clamp with 4.5 m lead. Operator and safety manuals. 1 nozzle and 1 electrode. Carrying strap.

3M Speedglas Adflo Main Particle Filter (Pack of 2)

3M Adflo system main particle filters supplied in a pack of 2. Ensure superior respiratory protection with the 3M 837012 Replacement Main Filters. Designed for use with compatible 3M respirators, these high-efficiency filters provide reliable filtration against airborne contaminants, helping to maintain clean and breathable air in demanding work environments. Key Features: ✅ Advanced Filtration: Effectively captures fine dust, fumes, and airborne particles for enhanced protection.✅ Extended Performance: Designed for durability and long-lasting filtration efficiency.✅ Easy Installation: Simple and secure fit onto compatible 3M respiratory systems.✅ Lightweight & Low Breathing Resistance: Ensures comfort during extended use without restricting airflow.✅ Pack of 2: Convenient twin-pack for regular replacements and continued protection. Specifications: Model: 3M 837012 Type: Replacement Main Filter Quantity: 2 Filters per Pack Compatibility: Suitable for use with select 3M respiratory protection systems Ideal for welders, industrial workers, and professionals in hazardous environments, the 3M 837012 Replacement Main Filters help safeguard against airborne contaminants, ensuring you can breathe easy on the job.

3M Speedglas 9100 / G5-01 / G5-03 Scratch Resistant Outer Lenses (Pk of 10)

3M Speedglas Outer Lenses 9100, G5-01 & G5-03 Scratch resistant coating Extend the life of your welding helmet and maintain clear vision with the 3M 527000 Replacement Outer Scratch-Resistant Lens. Designed for durability and high optical clarity, this premium replacement lens protects your helmet’s viewing area from scratches, spatter, and general wear, ensuring long-lasting performance in tough welding environments. Key Features: Scratch-Resistant Coating: Provides enhanced durability and longer-lasting clarity.Superior Protection: Shields your helmet’s auto-darkening filter from welding spatter, dust, and debris.High Optical Clarity: Reduces distortion and maintains a clear view for precision welding.Genuine 3M Replacement Part: Ensures compatibility and performance with select 3M welding helmets.Easy Installation: Quick and simple to replace for minimal downtime. Specifications: Model: 3M 527000 Type: Outer Cover Lens Fits: 9100, G5-01 & G5-03 Helmets 

3M Speedglas G5-02 Inner Protection Plates (Pack of 2)

3M speedglas G5-02 replacement inner protection lens Comes in a pack of 2

Pegatec Golden Professional Line 3MM Thick Steel Cutting Discs 4"(100mm) - 9"(230mm)

Pegatec Golden Professional Line – 3mm Thick Steel Cutting Discs Sizes: 4" (100mm), 4.5" (115mm), 5" (125mm), 7" (180mm), 9" (230mm) Thickness: 3.0 mm Application: Steel, mild steel, carbon steel, structural metals Type: Depressed centre (Type 41/42 depending on size) Product Overview The Pegatec Golden Line cutting discs are part of Pegatec's Professional Series, designed for aggressive, long-lasting cutting performance in general metalworking and fabrication environments. With a robust 3 mm thickness, these wheels are built for durability, longer life, and stability during straight cutting of thicker sections and profiles. Key Features Heavy-Duty 3 mm Thickness Built to handle tough cutting jobs with increased wheel life and stability. Reinforced Resin Bonded Construction Premium aluminium oxide grain with dual mesh reinforcement for enhanced safety and longer usage time. Golden Line Professional Grade Pegatec’s advanced formulation offers a balance of speed and longevity, making these discs suitable for both professionals and serious fabricators. Optimised for Carbon & Mild Steel Fast stock removal and smooth, burn-free cuts across general steels, structural profiles, rebar, angle iron, and more. Available in Multiple Sizes Covers all angle grinder sizes from 4" to 9", making it ideal for portable grinding setups or workshop use. Technical Specifications SizeDiameter (mm)Thickness (mm)Bore (mm)Max Speed (RPM) 4" 100 3.0 16 15,300 4.5" 115 3.0 22.23 13,300 5" 125 3.0 22.23 12,200 7" 180 3.0 22.23 8,600 9" 230 3.0 22.23 6,600 Applications Steel fabrication shops Construction and structural steel cutting Industrial maintenance and repair General-purpose cutting tasks in heavy-duty environments Benefits Long life even in harsh cutting conditions Reduced vibration and better control due to 3 mm thickness High cutting accuracy with minimal burring Reliable performance on all standard angle grinders Safety and Compliance Compliant with EN 12413 safety standards Manufactured under ISO 9001 quality control Reinforced to resist breakage under high RPM use Product advantages Application Materials Extra durability High-speed cutting High-break-resistance Comfortable cutting experience Economic Material of Thin-walled tube Various section bars Material of Solid Pipe Various Plates Stainless Steel Acid-resistant steel Tool steel High-tensile structural steel Mild steel

Cibo Surface Conditioning Material PTX Sleeve 280MM x 100MM (Pk OF 10)

Applications:  Surface conditioning belts are designed to give a consistent, smooth and burr free finish on stainless steel, aluminium and non-ferrous metals. For use on an inflatable wheel on machines such as FiniMaster or Poly PTX. Specification: Made with non-woven abrasive fleece. Needled to a low-stretch backing. Contains cooling agent. Check size. Length (circumference) is usually longer than coated abrasive sleeves due to thickness. Chose grades: Coarse (CO): For DP1 finish. Brushed finish. Medium (ME): 240-320 equivalent. V Fine (VF): Approx 400 finish.Satin finish.

Hycote Aluminium Coat Spray Paint 400ML

WHERE TO USE On all types of metallic and rigid plastics surfaces when used in conjunction with the appropriate primers. WHERE NOT TO USE On surfaces treated with primers of unknown composition, without first ascertaining suitability of use. BENEFITS   Excellent covering power Excellent durability Excellent resistance to sunlight and colour fade Excellent adhesion to primed surfaces   Product Code:Aluminium XUK035

Cibo Ceramic Grit Fibre Backed Disc Packs Of 50

Cibo Ceramic Grit Fibre Backed Disc – Pack of 50 Unlock exceptional cutting power and long-lasting performance with the Cibo Ceramic Grit Fibre Backed Discs. Engineered for demanding metalworking applications, these premium ceramic abrasive discs deliver rapid stock removal, cooler cutting action, and extended service life compared to conventional abrasives. Designed with a durable fibre backing, each disc maintains stability under high pressure, ensuring consistent results across grinding, blending, and surface preparation tasks. Ideal for use on stainless steel, carbon steel, alloys, and other hard metals, they are a dependable choice for welders, fabricators, and industrial workshops. Key Features: High-performance ceramic grain for superior cutting speed and longevity Fibre-backed construction provides strength and stability during heavy-duty use Cool grinding action reduces heat buildup and prolongs disc life Efficient stock removal for faster, cleaner results Suitable for stainless steel and tough metals Pack of 50 for excellent value and uninterrupted workflow   Performance & Material Compatibility Ideal Substrates: Stainless steel Mild steel High-strength alloys Heat-sensitive metals Applications: Heavy stock removal Weld grinding Deburring Surface preparation Blending and finishing Specification: High performance ceramic abrasive grain. Durable 0.8mm fibre backing. Centre hole with cross cut for easy fixing. For use on suitable backing pads (we suggest hard ventilated for coarse grades).

BÖHLER Bohler 1.0MM Thermanit 2209 (ER2209) Duplex Stainless MIG Wire 15KG

Characteristics and typical fields of application Thermanit 2209 is primarily designed for welding the duplex grade 2205 and similar but it can also be used for SAF 2304 type of steels. Thermanit 2209 provides a ferritic-austenitic weldment that combines many of the good properties of both ferritic and austenitic stainless steels. The welding can be performed using short, spray or pulsed arc. Welding using pulsed arc provides good results in both horizontal and vertical-up positions. Structure: Austenite with 45 – 55 % ferrite. Scaling temperature: Approx. 850 °C (air). Corrosion resistance: Very good resistance to pitting and stress corrosion cracking in chloride containing environments.

BÖHLER Bohler AWS E7018-1 Low Hydrogen Welding Electrodes

Bohler AWS E7018-1 Low Hydrogen Welding Electrodes – High-Strength, Low-Hydrogen Performance Bohler AWS E7018-1 Low Hydrogen Welding Electrodes are premium basic-coated stick electrodes designed for high-integrity welding applications where strength, toughness, and crack resistance are critical. Suitable for structural steels and demanding fabrication work, these electrodes deliver reliable performance across a wide range of industries. Formulated with a low hydrogen coating, they minimise the risk of hydrogen-induced cracking, making them ideal for thick sections, restrained joints, and high-strength steels. The “-1” classification indicates enhanced impact toughness at low temperatures, ensuring dependable weld performance even in harsh environments. These electrodes provide smooth arc characteristics, easy slag removal, and excellent weld bead appearance, with consistent mechanical properties and high metal recovery rates. They are suitable for use in all positions (except vertical down), offering flexibility for a variety of welding tasks. Key Features: Low hydrogen basic coating reduces risk of cracking AWS classification: E7018-1 (enhanced low-temperature toughness) Suitable for AC and DC+ welding Excellent arc stability and smooth running characteristics High-quality weld deposits with easy slag removal All-position welding capability (except vertical down) High metal recovery (>110%) for efficient welding () Applications: Structural steel fabrication Shipbuilding and offshore construction Pressure vessels and boiler work Pipeline welding and heavy engineering Machinery and general fabrication Why Choose These Electrodes? Enhanced low-temperature toughness – The “-1” classification ensures strong, reliable welds even in cold or demanding service conditions. () Reduced risk of hydrogen cracking – Ideal for critical welds on thick or high-strength materials. Consistent, high-quality results – Smooth arc, clean slag release, and excellent bead appearance improve productivity and finish. Versatile and industry-approved – Widely used across structural, offshore, and heavy fabrication sectors with multiple certifications. () Professional-grade reliability – Designed for applications where weld integrity and performance cannot be compromised. Dependable, durable, and engineered for demanding environments, Bohler AWS E7018-1 electrodes are the go-to choice for high-strength, low-hydrogen welding applications. ConformanceEN ISO 2560-A: E 42 5 B 42 H5AWS A5.1: E7018-1H4ApprovalsTÜV (12451.),ABS, BV, DNV,GL, CE

Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.  

Weld Star Mild Steel SG2 G3Si1 MIG Wire 250kg Marathon Bulk Pack

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

G-Tech Gas Equipment Gtec MIG Tip Nozzle Cleaner In Metal Case

Gtec MIG Tip Cleaner in Metal Case Essential Maintenance Tool for Prolonged MIG Torch Life and Consistent Weld Quality The Gtec MIG Tip Cleaner is a compact, reliable tool designed for cleaning and maintaining MIG welding contact tips. Housed in a durable metal case, this cleaner ensures your MIG tips remain free from spatter build-up, oxidation, and debris—improving electrical conductivity and ensuring stable arc performance. The rugged metal case keeps the reamers neatly stored and protected, while also doubling as a convenient handle for improved grip during cleaning. This is an essential tool for any welder looking to extend tip life, reduce downtime, and maintain optimal MIG torch performance. Key Features: Improves Arc Stability: Ensures smooth wire feed and consistent electrical contact Durable Metal Storage Case: Protects tools and provides a stable grip during use Compact and Portable: Fits easily into a toolbox or welding station drawer Extends Tip Life: Reduces spatter-related damage and helps maintain tip shape Easy to Use: Simple manual operation—no power or complex setup required Applications: MIG welding tip maintenance Cleaning contact tips in industrial, automotive, or fabrication settings Suitable for steel, stainless, and aluminum welding operations Typical Users: Professional welders Maintenance engineers Fabricators Workshop technicians   The Gtec MIG Tip Cleaner in Metal Case is a must-have addition to any welder’s toolkit—keeping your equipment in top condition and ensuring every weld starts clean and finishes strong.

G-Tech Gas Equipment Spindle Key

Starparts G Tech Spindle Key The Spindle key (cylinder key) is designed for the easy opening and closure of cylinder valves.To open a cylinder valve, simply rotate the spindle anti-clockwise using this spindle key. Turn clockwise to securely close the cylinder. Easy and safe opening and closure of cylinders  Fits square valve cylinders

G-Tech Gas Equipment Gtech Type 5 Gas Welding & Cutting Set In Carry Case

Starparts G-Tech Type 5 Welding & Cutting Set Versatile, Professional-Grade Oxy/Acetylene Kit for Welding, Cutting & Heating Operations The Starparts G-Tech Type 5 Welding & Cutting Set is a complete, heavy-duty gas welding and cutting kit designed for the demanding needs of modern fabrication, engineering, and maintenance environments. Engineered with durability, flexibility, and safety in mind, this set features Type 5 connections, allowing quick adaptation between welding, cutting, and heating tasks using the same ergonomic handle and mixer system. At the core of the kit is the Type 5 shank, a robust handle compatible with the included cutting attachment, welding mixer, and swaged welding nozzles. Combined with high-quality twin-gauge G-Tech regulators for precise gas control, 5m fitted hoses, flashback arrestors, and a full accessory set, this kit delivers everything needed for a wide range of oxy/acetylene gas processes. Neatly packaged in a stainless steel tool case, the set is portable, protective, and easy to transport—ideal for mobile welders, fabrication shops, and on-site maintenance teams. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Propane 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Propane 18/90 Cutting Set Complete, Heavy-Duty Gas Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Propane 18/90 Cutting Set is a premium, all-in-one gas cutting solution designed for professional metalworkers, fabricators, and site engineers. Housed in a durable stainless steel tool case, this complete kit is ready for immediate use with everything required for oxy/propane flame cutting operations—ideal for cutting ferrous metals with precision, safety, and efficiency. At the heart of the set is the trusted NM 18/90 cutting torch, known for its robust design, high flow rate, and reliable performance. Paired with single-stage, high-quality G-Tech regulators for both oxygen (300 bar) and propane (25 bar), the system ensures consistent and safe gas delivery under demanding conditions. This comprehensive kit also includes oxygen and fuel flashback arrestors, pre-fitted 10m hoses with 3/8" check valves, and two PNM cutting nozzles for different material thicknesses. A flint lighter and combination spanner add convenience, making the kit truly ready for action on arrival. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Acetylene 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set Complete Industrial-Grade Flame Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set is a fully equipped, high-performance gas cutting solution designed for industrial fabricators, engineers, and mobile welders. Built to handle demanding cutting tasks with speed and precision, this all-in-one kit provides everything required for professional oxy/acetylene cutting—neatly packed in a rugged stainless steel tool case. At the core of the set is the dependable NM 18/90 cutting torch, a proven industry standard renowned for its balanced design, powerful flame profile, and durability in tough environments. The kit includes G-Tech single-stage oxygen and acetylene regulators, delivering stable pressure control up to 300 bar (oxygen) and 25 bar (acetylene), ideal for precise flame adjustment. Also included are in-line flashback arrestors, 10m fitted hoses, and two ANM cutting nozzles to cover a range of material thicknesses. A flint lighter and combination spanner round out the kit, offering true "ready-to-go" functionality. Kit Contents:

Starparts Argon/Co2 Gas Flow Meter With 3/8" BSP Fittings

Argon/CO₂ Gas Flow Meter – 3/8" BSP Fittings The Argon/CO₂ Gas Flow Meter is a precision instrument designed for accurate monitoring and regulation of shielding gas flow in MIG, TIG, and MAG welding applications. Ideal for both professional and workshop use, it ensures optimal gas coverage, improving weld quality and reducing porosity. Constructed from durable materials, this flow meter features a clear, easy-to-read scale and a stable rotameter for precise flow measurement. With 3/8" BSP fittings, it is compatible with a wide range of standard gas cylinders and welding setups, making it a versatile choice for controlling argon, CO₂, or mixed gases. Key Features: Accurate argon/CO₂ gas flow measurement for MIG/TIG welding Clear rotameter scale for easy reading Durable construction for long-lasting use 3/8" BSP fittings for universal compatibility Improves shielding gas efficiency and weld quality Typical Applications: MIG Welding | TIG Welding | MAG Welding | Workshop Use | Industrial Fabrication Type: Gas Flow Meter Gas Compatibility: Argon, CO₂, and Mixed Gases Fittings: 3/8" BSP Ranges Available: 0-14LPM 0-25LPM 0-40LPM

Harris 6290 VVC Cutting Nozzle

Harris 6290 VVC Cutting Nozzle The Harris 6290 VVC Cutting Nozzle is a high-performance, precision-engineered consumable designed for oxy-fuel cutting applications. Manufactured by Harris, it provides clean, accurate cuts and consistent flame control, making it ideal for professional welders, fabricators, and maintenance technicians. Constructed from durable, heat-resistant materials, the 6290 VVC nozzle ensures long service life even under frequent, high-temperature use. Its robust design delivers reliable performance across a wide range of mild steel and ferrous metal cutting tasks in industrial and workshop environments. Key Features: Precision-engineered Harris cutting nozzle Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard oxy-fuel cutting equipment Ideal for fabrication, industrial workshops, and maintenance applications Typical Applications: Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Harris Model: 6290 VVC Type: Cutting Nozzle Features: Minimizes kerf Increases Cutting Speed Reduces Heat Input High Quality Machine Cuts Reduces Afterwork Used with Low-cost Fuel Gases

F-TECH F-Tec X Bench Filter Pro 2000 Down & Rear Extraction

The F-Tech Bench Filter Pro 2000 is an efficient and versatile downdraught bench. Used for suction of fumes and spoiled work dust, welding fumes, grinding, wood, metal, marble, plastic and for all activities necessary to protect the operator and create a safe working area. Useful 2mtr wide work surface (1870 x 715mm) G2 pre-filters, metal mesh 70% F7 rigid pocket filter 2 95% Manufactured from galvanised steel the X Bench Filter Pro 2000 comes complete with:  Plenum chamber - dust separator, sparks eliminator Filtering section with F7 efficiency, with an easy sideways removal for maintenance and parts replacement. Practical extractable chest for major slag collection Sealed dust collection drawers A work plan splitter to create a double working space Centrifugal fan with backward curved impeller Side exhaust silencer to allow a re-entry of purified air into the workplace Additional PPE recommended Suitable applications: Welding fumes, Wood, Metal, Smoothing, Marble, Plastic Technical Data  Filter efficiency95% F7 Classification Motor power1.5 Kw Rated input voltage400V Flow rate pressure3300 m³/h Dimensions (external)2270 x 900 x 1330/1800 mm Weight200 Kg

F-TECH F-Tec X Bench 1500 Down & Rear Draught

The F-Tech X Bench 1500, down and rear draught extraction bench for centralised systems, 1.5 meter. Suitable for extraction of welding fumes and particulate, sanding, grinding, iron, marble, plastic and all activities where there is a need to protect the operator and create a safe working area. An efficient and versatile 1.5mtr down and rear draught bench For efficient use in the extraction and filtration of welding or grinding fume particle recovery, deburring, polishing of components and items with limited weights and measures Additionally it can be used for small manual thermal cutting operations Rugged standardised suction surface which is modifiable depending on work to be carried out Sealed dust collection drawers Internal mechanical pre-filtration section composed of a cylindrical spark-trap steel mesh filter Accessories available Additional PPE recommended  Technical Data Pre-filteration efficiency75% Flow rate pressure3000 m³/h Dimensions1500 x 700 x 840 mm Weight100 Kg 5 Year Warranty.

Wilkinson Star Exact Diamond X140 Heavy Duty Disc 140mm

Technical Specification Heavy duty special diamond blade only to be used for cutting cast iron and ductile pipes.     Suitable for PipeCut 170/170E/200/200E models.   Technical Specification Diameter 140 Bore 62 Kerf 2.7 Body 1.5 For Material Cast Iron, Ductile (nodular cast iron)   Suitable For 170, 170E, 200, 220E  

Exact Cutting Tools Exact Pipe Support Rollers P400 Single

Exact Pipe Support Rollers P400 – Single Precision Pipe Handling for Safe, Efficient Cutting and Fabrication The Exact Pipe Support Roller P400 is a high-quality, single roller stand designed to support and stabilize pipes during cutting, beveling, or other pipe processing tasks. Purpose-built for use with Exact pipe cutting systems and compatible tools, the P400 offers a safe, stable, and ergonomic solution for rotating and feeding pipes smoothly during fabrication or maintenance work. Manufactured from heavy-duty steel with industrial-grade roller bearings, the P400 can support pipes up to 400 kg (880 lbs) and diameters from 15 mm to 460 mm (0.6" to 18"), making it suitable for a wide range of pipe materials including carbon steel, stainless steel, cast iron, copper, and plastic. The free-rolling design allows the pipe to rotate effortlessly, reducing friction and manual handling, and helping operators achieve more accurate cuts with less fatigue. The support roller’s compact and stackable design also makes it easy to transport and store, whether on-site or in a workshop setting. Used individually or in pairs, the P400 is a vital accessory for improving efficiency, precision, and safety during pipe preparation work. Key Features: Robust Construction: Durable steel frame with high-performance roller bearings High Load Capacity: Supports up to 400 kg (880 lbs) per unit Wide Pipe Diameter Range: Accommodates 15 mm – 460 mm (0.6" – 18") pipe sizes Smooth Pipe Rotation: Low-friction rollers allow for easy handling and precision cutting Compact and Stackable: Easy to transport, store, and set up on-site Non-slip Base: Ensures stability during operation on various surfaces Ideal for Use with Exact PipeCut Systems and compatible cutting or beveling tools Typical Applications: Pipe cutting and beveling Pipeline installation and repair Prefabrication workshops Mechanical and process piping On-site construction work Specifications: Maximum Load Capacity: 400 kg (880 lbs) Pipe Diameter Range: 15 mm – 460 mm (0.6" – 18") Material Compatibility: Metal and plastic pipes Unit Type: Single roller support Weight: Approx. 5.2 kg (11.5 lbs)   The Exact P400 Pipe Support Roller is a must-have tool for pipefitters, welders, and contractors who need reliable support and smooth rotation when cutting or preparing pipework. Use individually or in pairs to maximise safety, precision, and productivity on any job.

Wilkinson Star Exact Alu 140 Blade 140mm

Diameter 140 Bore62 Kerf2.5 Body1.8 Teeth36 For MaterialAluminium Suitable For170, 170E, 200, 220E

Bessey Tools Bessey Clamp Quick Ratchet Lever Clamp

Bessey All Steel Lever Clamp Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy to handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GSH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.

Bessey Tools Bessey High Performance All Steel Screw Clamp

Bessey High Performance All Steel Screw Clamp Increasingly high clamping pressures, with larger throat depths and wider openings. Clamping force up to 12,000N with a tightening torque of 40Nm, These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis.     Used in general fabrication, steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy. Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle.The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.  

Wilkinson Star AMA Roller Pipe Rotator & Pipe Stand A

Product Details Package Includes Roller Pipe Rotator plus Stand A  Boosts Productivity up to 30% - Pipe Stand Set For Professionals The pipe rotator is an accessory for AMA’s A pipe stand, and is suitable for both preparatory workshops and job sites. The device rotates pipes at the desired speed and the welder doesn’t have to constantly change positions. The pipe rotator streamlines work in many phases:   Facilitates cutting with an angle grinderEasier, faster welding and assembling tack welding (no interruptions, seam resembles a robot weld)Cleaning of back welds and brushing of seamsSuitable for all manual welding methods: MIG, MAG, covered electrode arc welding, and TIGEnables welding of difficult materials in one ergonomic positionQuicker brushing of stainless steel seamsQuick-release fastener for easy fastening / removal from AMA’s A pipe standSuitable for pipe diameters from 30 to 508 mmWeight: 23 kgTorque: 30 NmAdjustable rotating speed and directionFoot pedal-operated  

Irwin Vise-Grip 7R Straight Jaw Locking Pliers

The IRWIN Vise-Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever. 7RC: Length: 178mm, Capacity: 38mm10RC: Length: 254mm, Capacity: 48mm These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 10CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.

Irwin Vise-Grip 7CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 6SP 150MM Swivel Pad Locking C-Clamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 6SP Locking C-Clamp Swivel Pad. Length: 150mm (6in)Throat Diameter: 32mm (1 1/4in)Capacity: 50mm (2in)

Exact Cutting Tools Exact 170E Pipe Cutting System 110V

Product Details Powerful, lightweight and handy PipeCut 170E can be used for cutting both metal and plastic pipes. Because of its adjustable speed and steady torque feature it is ideal for cutting stainless steel and cast iron pipes. It offers hi-end performance for pipe fitting professionals. Includes:   PipeCut Bag 2 Exact PipeCut 170 pipe saw Pipe Support 170, 4pcs Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 140 blade fitted to the machine Technical Specification

Wilkinson Star Exact 220E Pipe Cutting System 110V

Product Details Power plus a wide cutting capacity with PipeCut 220E. It can be used for cutting both metal and plastic pipes; the machine has adjustable motor speed and contant torque. Because of its robust design it is ideal for use in both the workshop or on site for a multitude of different pipe applications.   Includes PipeCut Bag 3 Exact PipeCut 220E pipe saw Pipe Support 280, 4pcs Operating instructions Hex socket key 5 mm and 2 mm fitted to the machine TCT 140 blade fitted to the machine Technical Specifications

Exact Cutting Tools Exact P400 Pipe Cutting System 110V

Product Details Cut and bevel plastic pipes in one process. Unique method for plastic pipe installations. You just need to cut around a pipe and you get nice 15 degrees bevel at the same time. You can use the PipeCut P400 saw also only for cutting or only for just to bevel plastic pipes.   Includes PipeCut Bag 1 Exact PipeCut P400 pipe saw Pipe Support 2x P400 Single + P400 Double Operating instructions Hex socket key 5 mm fitted to the machine TCT P150 blade fitted to the machine Technical Specifications Pipe OD 100mm – 400mm (3.9”- 15.7”) Max. wall thickness 25mm (0.98”) cut, 22mm (0.86”) c.b. Pipe material Plastic Voltage / Power 230V / 1010W Voltage / Current 110V, 120V / 8.4A No-Load speed 4000 r/min Blade diameter 148/150mm (5.8”/5.9”) Mounting bore 62mm (2.44”) Weight 6,0kg (13 lbs)

Exact Cutting Tools Exact Pipe Beveller 220E Machine Only 110V

Product Details The Exact PipeBevel 220E is a portable and lightweight pipe beveller that produces continuous good results for on-site pipe bevelling applications. With this machine you will make easy, fast and consistent bevels to a variety of pipe materials of steels and stainless steels. The set-up is fast and simple. The clean and user-friendly design makes it fast to mount on pipe sizes 25 mm – 220 mm (0.98”- 8.6”) and up with a maximum wall thickness of 10mm (0.39”). The built-in stopper feature enables and makes it easy for the operator to make similar additional bevels to the same pipe outside diameter. This reduces the cycle times dramatically and ultimately improves workflow. The cutting heads to the PipeBevel 220E are available in the most used bevel angles (30°, 37.5° and 45°). It is also possible to make different ‘tailored’ bevel angles if required. The cutting head of the beveller has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life. The user interface of the machine is similar to Exact pipe saws, which makes it easy for the operator to adapt after cutting a pipe with any Exact pipe saw. Includes:   Suitable for pipes of steels and stainless steels. Suitable for pipe sizes of 25 mm – 220 mm (0.98”- 8.6”) and up with a wall thickness of 10mm (0.39”). Does not create flames or sparks. External cutting head is available in three bevel angles (30°, 37.5° and 45°). Easy, fast and consistent bevels. Fast and simple set-up. Technical Specifications

Exact Cutting Tools Exact Pipe Beveller 360E Machine Only 110V

Product Details The Exact PipeBevel 360E is a portable and easily transportable pipe beveller that produces continuous good results for on-site pipe bevelling applications. With this machine you will make easy, fast and consistent bevels to a variety of pipe materials of steels and stainless steels. The set-up is fast and simple. The clean and user-friendly design makes it fast to mount on pipe sizes 110 mm – 360 mm (4.33”- 14.17”) and up with a maximum wall thickness of 10mm (0.39”). The built-in stopper feature enables and makes it easy for the operator to make similar additional bevels to the same pipe outside diameter. This reduces the cycle times dramatically and ultimately improves the workflow. The cutting heads to the PipeBevel 360E are available in the most used bevel angles (30°, 37.5° and 45°). It is also possible to make different ‘tailored’ bevel angles if required. The cutting head of the beveller has 3 cutting tips, each of them having 4 cutting edges to rotate once becoming blunt. Thanks to this, you will have a prolonged beveller blade tip life. The user interface of the machine is similar to Exact pipe saws, which makes it easy for the operator to adapt after cutting a pipe with any Exact pipe saw.   Includes Suitable for pipes of steels and stainless steels. Suitable for pipe sizes of 110 mm – 360 mm (4.33”- 14.17”) and up with a wall thickness of 10mm (0.39”). Does not create flames or sparks. External cutting head is available in three bevel angles (30°, 37.5° and 45°). Easy, fast and consistent bevels. Fast and simple set-up. Technical Specification  

Welding Shelter Frame Only

The SAFE2072 Welding Shelter Frame Only provides a practical framework for creating a designated welding area or welding bay within fabrication workshops, engineering facilities and industrial environments. Designed to support a compatible welding shelter covering, the frame provides the structural foundation for establishing a dedicated workspace where welding and fabrication activities can be carried out. A welding shelter can help separate welding operations from surrounding workshop activities, particularly where suitable welding curtains or protective screens are installed to help reduce exposure to welding arc radiation and sparks. The SAFE2072 Welding Shelter Frame is ideal for businesses looking to establish a new welding bay, replace an existing shelter frame or improve the organisation of their welding and fabrication workspace. Please note: This product is supplied as the FRAME ONLY. Welding curtains, shelter covers and other accessories are not included unless specifically stated. Key Features SAFE2072 Welding Shelter Frame Frame-only configuration Designed for use with a compatible welding shelter covering Ideal for creating designated welding bays Suitable for professional welding and fabrication workshops Provides a framework for welding area separation Suitable for new welding bay installations Practical replacement for a compatible existing shelter frame Helps organise welding operations within industrial environments Suitable for engineering, maintenance and fabrication applications Typical Applications Ideal for: Welding and fabrication workshops Designated MIG welding bays TIG welding work areas MMA / Stick welding stations Engineering workshops Industrial maintenance facilities Training and educational welding facilities Workshop welding area separation Replacement welding shelter installations Specification Product Code: SAFE2072Product Type: Welding Shelter FrameConfiguration: Frame OnlyApplication: Welding Bay / Welding ShelterSuitable For: Welding, Fabrication & Engineering WorkshopsCurtains / Covers Included: NoCompatibility: Suitable welding shelter covering required  

Solid Tyre Single Oxygen/Acetylene Cylinder Trolley

Solid Tyre Single Oxygen/Acetylene Cylinder Trolley Designed to hold a single oxygen or acetylene gas cylinder this portable trolley features solid tyre wheels, rubber handles and bottle chain. Cylinder Types: Oxygen W and Acetylene F G H Trolley Dimensions (approx.):840mm x 280mm x 280mm Weight approximately 12kg