Stronghand Tools Stronghand EZ View Gas Cylinder Valve Indicator

Strong Hand EZ-View Gas Cylinder Valve Indicator Never accidentally leave a gas cylinder turned on again with the Strong Hand EZ-View Gas Cylinder Valve Indicator. Designed to provide a clear visual indication of whether a gas cylinder valve is open or closed, this simple yet highly effective safety accessory helps reduce gas wastage, improve workshop safety, and lower operating costs. The EZ-View indicator snaps securely onto the cylinder valve handwheel and can be recognised from a distance, allowing operators to instantly identify the valve status without needing to inspect it closely. Manufactured from durable ABS plastic, it is built to withstand the demands of busy fabrication workshops, welding bays, and industrial environments. Available to suit a range of common gas cylinder valve handwheel designs, the EZ-View Gas Cylinder Valve Indicator is an ideal addition to any MIG, TIG, or gas welding setup where safety and efficiency are a priority. Key Features: Provides an instant visual indication of gas valve open or closed status Helps prevent expensive shielding gas from being left on accidentally Improves workshop safety and promotes good operating practices Durable ABS plastic construction for long service life Quick, tool-free snap-on installation Visible from a distance for fast status checks Available to fit 3-star, 5-star and 8-star gas cylinder valve handwheels Ideal for welding workshops, fabrication facilities and industrial gas applications Specifications: Product Type: Gas Cylinder Valve Status Indicator Material: High-impact ABS Plastic Installation: Snap-on, tool-free fitting Compatibility: Available for 3-star, 5-star and 8-star cylinder valve handwheels Application: Suitable for shielding gas and industrial gas cylinders Manufacturer: Strong Hand Tools

TIG Aesthetics 4.5/5" Silicone Purge Plugs

TIG Aesthetics By Ticon 4.5/5" Silicone Purge Plugs TIG Aesthetics by Ticon – 4.5/5" Silicone Purge Plugs Precision Engineered for Clean, Consistent Weld Purging The TIG Aesthetics by Ticon 4.5/5" Silicone Purge Plugs are a premium solution for weld purging applications, specifically designed for use in stainless steel and titanium TIG welding. Manufactured from high-quality, high-temperature silicone, these plugs provide a reliable, airtight seal inside pipework and tubing during purging operations, ensuring optimal shielding gas coverage and oxygen displacement. Built to fit 4.5/5"  pipe and tube, these reusable silicone plugs are ideal for fabricators and welders demanding consistently clean, oxide-free welds—especially critical in food-grade, aerospace, pharmaceutical, and high-purity process industries. Key Features: High-Temperature Resistant Silicone – Withstands elevated temperatures without warping or degrading, making it perfect for prolonged TIG welding operations. Flexible & Durable Construction – Conforms to slight pipe variations while maintaining a secure fit, ideal for repeated use. Optimized Gas Sealing – Creates a tight seal to maintain positive pressure and effective shielding during back purging. Reusable & Cost-Efficient – Easily cleaned and long-lasting, offering excellent value over time compared to single-use alternatives. Color-Coded for Quick Sizing – Allows for fast identification of sizes in workshop environments. Technical Specifications: Size Compatibility: 4.5/5" OD Pipe  Material: High-grade silicone (food-safe and chemical resistant) Temperature Resistance: Up to approx. 315°C (600°F) Reusability: Multiple weld cycles with proper care Seal Type: Friction-fit, gas-tight seal Recommended Use: With inert gases such as Argon for TIG purging Applications: Stainless steel and titanium TIG welding Pipe and tube fabrication Food-grade and pharmaceutical installations Aerospace and high-purity systems Any application requiring weld oxide prevention on the ID Why Choose TIG Aesthetics by Ticon Purge Plugs?   Trusted by top fabricators around the world, these silicone purge plugs offer a high-performance, reusable solution for back purging operations. Designed for precision and built for durability, they help achieve flawless internal welds, saving time on post-weld cleaning and ensuring compliance with even the most stringent weld standards. Replacement purge plugs for the TIG Aesthetics sets  Come as a pack of 2 plugs with diffusers 

Hi-Lo Gas Equipment Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor Regulator Mounted

Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor (Regulator Mounted) The Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor is a critical safety device designed to protect gas equipment and operators from dangerous flashback incidents. Specifically engineered for regulator mounting, it provides reliable protection in fuel gas systems used in welding, cutting, and heating applications. Featuring a non-resettable design, this flashback arrestor ensures maximum safety by permanently shutting off gas flow in the event of a flashback, preventing flames from travelling back into the regulator or gas supply. Its high-quality construction and precision engineering deliver dependable performance under demanding industrial conditions. Compact and easy to install, it integrates seamlessly with compatible regulators, adding an essential layer of protection without complicating your setup. Built to meet stringent safety standards, it is an indispensable component for maintaining safe and compliant gas operations. Key Features: Designed for fuel gas systems in welding and cutting applications Regulator-mounted for convenient installation Non-resettable mechanism for maximum safety Prevents reverse gas flow and flashback hazards Durable, high-quality construction for long-term reliability Compact design for easy integration

Hi-Lo Gas Equipment Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor Regulator Mounted

Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor (Regulator Mounted) The Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor is a critical safety device designed to protect gas equipment and operators from dangerous flashback incidents. Specifically engineered for regulator mounting, it provides reliable protection in oxygen systems used in welding, cutting, and heating applications. Featuring a non-resettable design, this flashback arrestor ensures maximum safety by permanently shutting off gas flow in the event of a flashback, preventing flames from travelling back into the regulator or gas supply. Its high-quality construction and precision engineering deliver dependable performance under demanding industrial conditions. Compact and easy to install, it integrates seamlessly with compatible regulators, adding an essential layer of protection without complicating your setup. Built to meet stringent safety standards, it is an indispensable component for maintaining safe and compliant gas operations. Key Features: Designed for oxygen systems in welding and cutting applications Regulator-mounted for convenient installation Non-resettable mechanism for maximum safety Prevents reverse gas flow and flashback hazards Durable, high-quality construction for long-term reliability Compact design for easy integration

Hi-Lo Gas Equipment Hi-Lo GG Fuel Gas Torch Side Flashback Arrestor

Hi-Lo GG Flashback Arrestor – Torch-Side Protection The Hi-Lo GG Flashback Arrestor provides reliable torch-side protection in accordance with DIN EN ISO 5175-1 standards. Designed for maximum safety, it features an integrated dust filter to protect the gas non-return valve from contamination, ensuring long-lasting, trouble-free operation. Constructed entirely from high-quality brass (2.0401) with a durable stainless-steel spring (1.4310), this device effectively stops flashbacks using a precision flame arrestor. Each flashback arrestor is 100% safety tested by a qualified and authorised technician at regular intervals, in compliance with strict regulations. Testing covers gas tightness, gas flow, and gas return, guaranteeing reliable performance in demanding environments. Key Features: Complies with DIN EN ISO 5175-1 safety standard. Stops flashback through an integrated flame arrestor. Built with all-metal brass and stainless-steel components for strength and durability. Dust filter protects the gas non-return valve from contamination. Individually tested for gas tightness, gas flow, and gas return by certified personnel. Product Numbers:   Fuel Gas – HL070371

Starparts Gas Cylinder 90° Adaptor Left Hand Threaded

Gas Cylinder 90° Adaptor Left Hand Threaded makes connecting the regulator easier when cylinders have a big guard round the tap on top

Starparts Gas Nut 3/8" BSP Left Hand Thread

Gas Nut – 3/8″ BSP Left Hand Thread This precision‑made 3/8″ BSP left hand thread gas nut is a reliable and essential component for welding gas delivery systems that require left‑handed connections. Designed for secure sealing and robust performance, it ensures gas‑tight joints between regulators, hoses and fittings in professional welding environments. Key Features & Benefits 3/8″ BSP left hand thread — standard left‑handed thread for applications that require reverse threading Precision machined — ensures accurate fit and reliable gas‑tight sealing Durable construction — engineered to withstand workshop conditions and repeated use Versatile use — ideal for TIG, MIG and gas‑shielded welding applications Applications Perfect for gas system installations or repairs where a left‑hand threaded gas connection is specified, such as on certain regulators, valves and welding equipment. Compatibility Fits gas fittings, regulators, valves and accessories with a 3/8″ BSP left hand threaded port, ensuring a secure and leak‑free connection.

Hi-Lo Gas Equipment Hi-Lo GG Oxygen Torch Side Flashback Arrestor

Hi-Lo GG Flashback Arrestor – Torch-Side Protection The Hi-Lo GG Flashback Arrestor provides reliable torch-side protection in accordance with DIN EN ISO 5175-1 standards. Designed for maximum safety, it features an integrated dust filter to protect the gas non-return valve from contamination, ensuring long-lasting, trouble-free operation. Constructed entirely from high-quality brass (2.0401) with a durable stainless-steel spring (1.4310), this device effectively stops flashbacks using a precision flame arrestor. Each flashback arrestor is 100% safety tested by a qualified and authorised technician at regular intervals, in compliance with strict regulations. Testing covers gas tightness, gas flow, and gas return, guaranteeing reliable performance in demanding environments. Key Features: Complies with DIN EN ISO 5175-1 safety standard. Stops flashback through an integrated flame arrestor. Built with all-metal brass and stainless-steel components for strength and durability. Dust filter protects the gas non-return valve from contamination. Individually tested for gas tightness, gas flow, and gas return by certified personnel. Product Numbers:   Oxygen – HL070370 Fuel Gas – HL070371

NMSH Heating Adaptor For NM Torches

NMSH Super Heating Adaptor The NMSH Super Heating Adaptor is a high-quality heating accessory designed to provide reliable, efficient performance for a wide range of industrial and fabrication applications. Built for use with compatible super-heating nozzles and equipment, this adaptor ensures a secure, leak-free connection, delivering maximum heat output for tasks such as heavy-duty brazing, metal pre-heating, flame straightening, and heat treatment. Constructed from durable, precision-machined brass, the NMSH adaptor offers excellent thermal resistance and long service life, even under high-temperature conditions. Its robust design allows for safe, consistent gas flow, giving operators the confidence to tackle demanding heating jobs with accuracy and control. Key Features: Precision-machined brass construction – exceptional strength, conductivity, and heat resistance. Secure fit – provides a tight, leak-free connection to compatible super-heating nozzles. High thermal performance – supports heavy-duty heating, brazing, and pre-heating tasks. Industrial-grade durability – built for frequent use in fabrication, welding, and maintenance environments. Easy installation – quick to fit and replace for minimal downtime.   Ideal for workshops, fabrication shops, and maintenance teams, the NMSH Super Heating Adaptor delivers safe, efficient performance wherever high-output heating is required.

Hi-Lo Gas Equipment Hi-Lo UK Made 2 Stage 2 Gauge Argon/CO2 Regulator Bottom Entry 10 Bar

Two Stage Fabmaster Elite 2 gauge Argon 10 bar Regulator   Key Information: · 2 years warranty · 300 bar service · Manufactured under BS EN SO 9001 · Conforms to BS EN ISO 2503 · Alloy bonnet for high strength · High contrast easy to read gauges · Made In Britain  · Available in bottom or side entry

Hi-Lo Gas Equipment Hi-Lo UK Made 2 Stage 2 Gauge Argon/CO2 Regulator Bottom Entry 5 Bar

Two Stage Elite 2 gauge Argon 5 bar Regulator Hi-Lo UK industrial gas cutting and welding equipment have a full range of high-quality products. We pride ourselves in customer satisfaction and with extensive experience and knowledge, we work to help with your industrial gas and gas control equipment needs.    Key Information: · 2 years warranty · 300 bar service · Manufactured under BS EN SO 9001 · Conforms to BS EN ISO 2503 · Alloy bonnet for high strength · High contrast easy to read gauges · Made In Britain 

G-Tech Gas Equipment Gtech Lightweight Welding & Cutting Set In Case

Starparts G-Tech Lightweight Welding & Cutting Set Compact, Professional Oxy/Acetylene Kit for Welding, Cutting & Maintenance Work The Starparts G-Tech Lightweight Welding & Cutting Set offers a versatile and portable solution for professional gas welding and cutting applications, particularly suited for light-to-medium duty fabrication, repair, and maintenance tasks. Designed with user comfort and mobility in mind, this set features a lightweight handle, mixer, and cutting attachment, making it ideal for extended use without operator fatigue—perfect for workshop use or on-site tasks. Equipped with precision 2-gauge oxygen and acetylene regulators, reliable in-line flashback arrestors, and 6mm twin hoses with 1/4" check valves, the system ensures safe and consistent gas delivery. The set also includes a range of nozzles to cover both welding and cutting operations, along with essential accessories—all housed in a compact, organised kit. Kit Contents:

Starparts Argon & Inert Welding Gas Black 6MM (1/4") Hose Per Metre

The Argon & Inert Welding Gas Black 6mm (1/4") Hose is designed for carrying compatible shielding gases used in professional MIG and TIG welding applications. Featuring a 6mm (1/4") internal bore, this black gas hose is ideal for creating replacement gas lines, extending existing installations or producing custom-length welding gas hose assemblies. Suitable for argon and compatible inert shielding gases, it is a useful workshop essential for welding equipment, gas regulators, flowmeters and other compatible gas supply installations. The hose is sold and priced per metre, allowing you to order the length required for your particular installation while minimising unnecessary waste. Key Features Suitable for argon and compatible inert welding gases 6mm (1/4") internal bore Black gas hose Ideal for MIG and TIG welding applications Suitable for replacement and custom gas hose assemblies Useful for workshop and fabrication gas installations Order the length required for your application Sold per metre Typical Applications Ideal for use with compatible: MIG welding equipment TIG welding equipment Argon shielding gas systems Inert gas supply lines Welding regulators and flowmeters Workshop gas installations Specification Product Type: Welding Gas HoseSuitable Gas: Argon & Compatible Inert GasesColour: BlackBore Size: 6mm (1/4")Sold As: Per MetreTypical Application: MIG & TIG Welding Ordering Information This product is sold per metre. Simply select the quantity required to order your desired length. For example, a quantity of 5 = 5 metres of hose. Please Note: Always ensure the hose is suitable for the specific gas, pressure, fittings and equipment being used. Popular alternative to the clear nylon brainded gas hose 

High Temperature Weld Backing Tape 38mm X 130mm - 10Mtr Roll

This 10-metre reel of Aluminium Weld Backing Tape is a versatile and efficient solution for TIG, MIG, or Stick welding applications. Offering a practical alternative to traditional back-purging methods that rely on inert shielding gases like Argon, this flexible aluminium tape with a woven fiberglass center is designed to simplify and enhance your welding process. The tape features two adhesive edges with a heat-resistant fiberglass strip in the center, capable of withstanding temperatures up to 1,022°F (550°C). Its flexible design allows it to adapt to various shapes and configurations, making it suitable for backing weld joints and preventing oxidation on the reverse side of the weld. Key Benefits: Improved Weld Quality: The high-temperature fiberglass backing supports the weld, ensuring smoother, flatter results. Enhanced Efficiency: Reduces setup, cleanup, and weld time, while eliminating the need for post-weld grinding and back gouging. Cost-Effective: Minimizes material and labor costs by eliminating back-purging gases and associated equipment. Stress Reduction: Prevents the formation of stress points prone to cracking or breaking over time. Oxygen Contamination Prevention: Protects welds from oxidation by dissipating heat and preventing re-oxidation. Specifications: Resilient to High Temperatures: Up to 550°C (1,022°F). Dimensions: 38mm width x 130mm length per strip. Versatile Applications: Suitable for flat plates, curved shapes, and complex configurations. Target Applications: This Aluminium Weld Backing Tape is ideal for: Stainless and low-alloy steels. High-nickel alloys. Pipe and tube welding. Maintenance and field welding. Large diameter pipes and ducts. Unusual shapes and configurations. Aircraft airframe and jet engine repairs.

High Temperature Weld Backing Tape 29mm X 120mm - 10Mtr Roll

This 10-metre reel of Aluminium Weld Backing Tape is a versatile and efficient solution for TIG, MIG, or Stick welding applications. Offering a practical alternative to traditional back-purging methods that rely on inert shielding gases like Argon, this flexible aluminium tape with a woven fiberglass center is designed to simplify and enhance your welding process. The tape features two adhesive edges with a heat-resistant fiberglass strip in the center, capable of withstanding temperatures up to 1,022°F (550°C). Its flexible design allows it to adapt to various shapes and configurations, making it suitable for backing weld joints and preventing oxidation on the reverse side of the weld. Key Benefits: Improved Weld Quality: The high-temperature fiberglass backing supports the weld, ensuring smoother, flatter results. Enhanced Efficiency: Reduces setup, cleanup, and weld time, while eliminating the need for post-weld grinding and back gouging. Cost-Effective: Minimizes material and labor costs by eliminating back-purging gases and associated equipment. Stress Reduction: Prevents the formation of stress points prone to cracking or breaking over time. Oxygen Contamination Prevention: Protects welds from oxidation by dissipating heat and preventing re-oxidation. Specifications: Resilient to High Temperatures: Up to 550°C (1,022°F). Dimensions: 29mm width x 120mm length per strip. Versatile Applications: Suitable for flat plates, curved shapes, and complex configurations. Target Applications: This Aluminium Weld Backing Tape is ideal for: Stainless and low-alloy steels. High-nickel alloys. Pipe and tube welding. Maintenance and field welding. Large diameter pipes and ducts. Unusual shapes and configurations. Aircraft airframe and jet engine repairs.

11-13MM Double Eared Hose O-clip

Jasic EPT-200 200A DC TIG Welder Package 230V

Jasic EPT-200 CD TIG Welder The Jasic EVO POWER TIG 200 PFC (EPT-200) is a DC TIG welder that handles Steel, Stainless Steel, and Titanium. It's the entry-level TIG machine in the Jasic EVO range and works great if you need a solid DC TIG welder that runs off 230V (generators included). Don't let "entry-level" fool you though—it's still packed with loads of the same parameter controls you'll find on its bigger sibling, the EVO TIG 200 PFC. Like the rest of the upgraded EVO range (which replaced the much-loved PRO series), you get a large, easy-to-read control panel wrapped in a tough shell that looks the business. You can also add optional foot controls, including a wireless pedal, if you want that extra control and freedom while welding. The ClearVision screen is a high-def LED display set at just the right angle so you can see what's going on without any eye strain. Despite all this, the machine's surprisingly light and easy to lug around. Switching between MMA and TIG mode is dead simple—just one button press and you're sorted. Comes with everything you need to get started: 4m WP26 TIG torch, earth return lead, argon regulator, protective carry case, and gas hose. Key Features: Rugged, ergonomic design Dash-Arc Smart Lift TIG Full-featured DC TIG parameters ABAP: Active Balancing Air Passage Smart gas for optimised shielding gas consumption Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection Complete with protective case and TIG leads

Weldgas Single Stage 2 Gauge Propane Side Entry Regulator

Weldgas Single Stage 2 Gauge Propane Side Entry Regulator  3/8" BSP outlet thread connection

Starparts Super Heating Pepperpot Nozzle 5

Starparts Super Heating Pepperpot Nozzle No. 5 The Starparts Super Heating Pepperpot Nozzle No. 5 is a high-performance oxy-acetylene heating nozzle designed to deliver an intense, evenly distributed flame for rapid and efficient heating of large metal sections. Featuring a multi-port "pepperpot" design, the nozzle produces multiple concentrated flame jets that provide fast, uniform heat distribution, making it ideal for heavy-duty industrial heating applications. Manufactured from high-quality copper for excellent thermal conductivity and long service life, the No. 5 pepperpot nozzle is suitable for use in fabrication, shipbuilding, foundries, structural steelwork, engineering workshops, and maintenance operations. It is ideal for pre-heating before welding, straightening steel, bending, shrinking, loosening seized fasteners, and other applications requiring controlled, high-output heating. Designed for compatibility with standard oxy-acetylene heating torches that accept Starparts-style super heating nozzles, this nozzle delivers reliable performance and excellent flame stability in demanding working environments. Key Features: High-performance oxy-acetylene super heating nozzle Multi-port "pepperpot" design for fast, even heat distribution Nozzle Size: No. 5 Manufactured from high-quality copper for durability Produces a stable, high-output heating flame Ideal for heating, bending, straightening and pre-heating steel Suitable for heavy-duty fabrication and industrial applications Precision engineered for reliable performance and long service life Specifications: Product Type: Super Heating Pepperpot Nozzle Brand: Starparts Size: No. 5 Fuel Gas: Acetylene Material: Copper Flame Type: Multi-Port Heating Flame Applications: Pre-heating, Steel Bending, Straightening, Shrinking, Heavy Fabrication, Maintenance, Shipbuilding and General Engineering BTU Output 250,000 - 618,000

Starparts Super Heating Pepperpot Nozzle 4

Starparts Super Heating Pepperpot Nozzle 4 BTU Output 236,000 - 406,000

Starparts Super Heating Pepperpot Nozzle No.3

Starparts Super Heating Pepperpot Nozzle 3 BTU Output 183,000 - 361,000

Starparts Super Heating Pepperpot Nozzle No.2

Starparts Super Heating Pepperpot Nozzle 2 BTU Output 102,000 - 188,000

Starparts Super Heating Pepperpot Nozzle No.1

Starparts Super Heating Pepperpot Nozzle 1 BTU Output 72,000 - 163,000

Starparts Gtech Propane Regulator Single Stage Plugged 25Bar

Starparts Gtech Propane Regulator – Single Stage Plugged 25 Bar The Starparts Gtech Propane Regulator is a high-quality, single-stage regulator designed to provide consistent and safe gas delivery for propane-based welding, cutting, and heating applications. Engineered for durability and reliability, it ensures stable pressure and efficient gas flow under demanding conditions. With a 25 Bar pressure rating and a robust, plugged design, this regulator is suitable for a wide range of industrial and workshop equipment. Its durable construction ensures long-term performance and safe operation, making it ideal for professional users requiring precision gas control. Key Features: Single-stage propane gas regulator 25 Bar maximum pressure for consistent gas delivery Robust plugged design for reliable operation Durable construction for long-lasting use Suitable for welding, cutting, and heating applications Typical Applications: Propane Gas Welding | Oxy-Fuel Cutting | Heating | Industrial Workshop Use   Brand: Starparts Type: Propane Gas Regulator Model: Gtech Single Stage Plugged 25 Bar

Starparts Gtech Type 5 Cutting Torch Shank

Starparts Gtech Type 5 Cutting Torch Shank Controls gas flow to the welding nozzle Conforms to ISO 5172 

Starparts Gtech Lightweight Cutting Torch Shank

Starparts Gtech Lightweight Cutting Torch Shank Controls gas flow to the lightweight welding nozzle Welds mild steel to 8mm (5/16”), cuts to 25mm (1”) 1/4” BSP fittings Suitable for lightweight swaged nozzles Conforms to ISO 5172 

Starparts Gtech Type 5 Welding Mixer

Type 5 Welding Mixer Mixer connects between a shank and a swaged nozzle.

Starparts Gtech Lightweight Mixer

Starparts Gtech Lightweight Mixer Mixer connects between a lightweight shank and a lightweight swaged nozzle

Starparts Gtech Type 5 Cutting Attachment

Type 5 Cutting Attachment Connects type 5 shank for cutting applications up to 150mm (6') For use with Oxygen and Acetylene Designed for the demands of modern welding/fabrication environments  

Starparts Gtech Lightweight Cutting Attachment

Lightweight Cutting Attachment Connects to lightweight shank for cutting applications up to 25mm (1") For use with Oxygen and Acetylene Lightweight range designed for automotive & light sheet metal work Suitable for AFNM cutting nozzles Starparts GTech

Starparts G Tech NM72/75 Extended Reach Cutting Torch

Starparts G Tech NM72/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 72" Length

Starparts G Tech NM36/75 Extended Reach Cutting Torch

Starparts G Tech NM36/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 36" Length

Starparts Gtech NM36/90 Gas Cutting Torch

Starparts Gtech NM36/90 Gas Cutting Torch The Starparts Gtech NM36/90 Gas Cutting Torch is a robust, professional-quality oxy-fuel cutting torch designed to deliver outstanding performance for cutting, gouging, and heating applications. Engineered for precision and reliability, the NM36/90 offers excellent balance, comfortable handling, and dependable operation, making it ideal for fabrication workshops, engineering companies, maintenance departments, and industrial environments. Manufactured from high-quality brass and stainless steel components, the torch is built to withstand the demands of daily use while providing accurate gas control and a stable cutting flame. The ergonomic handle and smooth-operating oxygen and fuel valves allow precise flame adjustment, helping to produce clean, accurate cuts across a wide range of steel thicknesses. The Starparts Gtech NM36/90 is compatible with both ANM pattern oxy-acetylene cutting nozzles and PNM pattern oxygen/propane cutting nozzles, giving users the flexibility to operate with either fuel gas depending on the application. Simply select the appropriate nozzle for the material thickness and fuel gas being used. This versatility makes the torch ideal for a wide range of fabrication, maintenance, demolition, agricultural, and industrial cutting applications. Key Features: Professional-grade oxy-fuel gas cutting torch Compatible with ANM pattern oxy-acetylene cutting nozzles Compatible with PNM pattern oxygen/propane cutting nozzles Suitable for use with both acetylene and propane fuel gases Durable brass and stainless steel construction Precision oxygen and fuel control valves Ergonomic handle for comfort and reduced operator fatigue Stable cutting flame for clean, accurate cuts Suitable for cutting, gouging and heating applications Ideal for fabrication, engineering, maintenance and industrial use Designed for long service life and dependable performance Specifications: Product Type: Oxy-Fuel Gas Cutting Torch Brand: Starparts Model: Gtech NM36/90 Fuel Gases: Acetylene or Propane (with the correct nozzle) Nozzle Compatibility: ANM Pattern Oxy-Acetylene Cutting Nozzles & PNM Pattern Oxygen/Propane Cutting Nozzles Construction: Brass and Stainless Steel Applications: Steel Cutting, Heating, Gouging, Fabrication, Construction, Agricultural Repairs and General Engineering Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 36" Length

Starparts Gtech NM18/90 Premium Gas Cutting Torch

Starparts Gtech NM18/90 Premium Gas Cutting Torch – Precision Cutting with Professional Durability The Starparts Gtech NM18/90 Premium Gas Cutting Torch is a high-quality oxy-fuel cutting solution designed for precision, reliability, and long-term performance in demanding environments. Featuring an 18” body with a 90° angled head, it offers excellent access and control when cutting in tight or awkward positions. Engineered for use with both oxy-acetylene and oxy-propane setups, this versatile torch is suitable for a wide range of cutting applications, from thin sheet material to heavy-duty steel. Its robust brass and steel construction ensures durability under continuous use, while the ergonomic design provides balanced handling for improved operator comfort. () The integrated lever control enables smooth operation of the cutting oxygen, while dual valve controls allow precise adjustment of the gas mixture for optimal flame performance. Designed in line with industry standards, it delivers consistent, clean cuts and dependable operation across workshop and on-site tasks. () Key Features: 18” length with 90° head for improved access and control Compatible with oxy-acetylene and oxy-propane systems Heavy-duty brass and steel construction for durability Lever-operated cutting oxygen for smooth, responsive control Dual valves for precise gas flow adjustment Suitable for cutting a wide range of material thicknesses (up to approx. 300mm with correct nozzle) Conforms to ISO 5172 standards for safety and performance

Starparts Gtech NM36/75 Gas Cutting Torch

Starparts G Tech NM36/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 36" Length

Starparts Gtech NM27/90 Gas Cutting Torch

Starparts G Tech NM27/90 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 27" Length

Starparts Gtech NM27/75 Gas Cutting Torch

Starparts G Tech NM27/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 27" Length

Starparts Eco NM18/90 Gas Cutting Torch

Starparts G Tech NM18/90 Eco Cutting Torch  Cut up to 12" (300mm) Everyday Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 18" Length

Starparts Gas Cylinder 90° Adaptor Right Hand Threaded

Gas Cylinder 90° Adaptor Right Hand Threaded makes connecting the regulator easier when cylinders have a big guard round the tap on top

Starparts Double Safety Check Valve 3/8" Right Hand Thread Nut To 3/8" Hosetail

Double Safety Check Valve 3/8" Right Hand Thread Nut To 3/8" Hosetail 3/8" - 3/8" Left Hand DSC (Double Safety Check) Valve Starparts G Tech

Starparts Double Safety Check Valve 3/8" Right Hand Thread Nut To 1/4" Hosetail

3/8" - 1/4" Right Hand DSC (Double Safety Check) Valve Starparts G Tech

Starparts Gas Y Piece Left Hand 3/8" BSP Connections Splitter

Left Hand Threaded Double Outlet Connector • Designed to split a single gas supply to 2 outlets • valve controlled

Starparts Gas 3/8" BSP To 3/8" BSP Equal Male Coupler Right Hand Thread

Gas 3/8" BSP To 3/8" BSP Equal Male Coupler Right Hand Thread Starparts G Tech

Starparts 1/4" BSP Male to 3/8" BSP Male Coupler

1/4" - 3/8" Male RH Coupler Starparts G Tech

Starparts Gas Hose Tail 3/8" BSP Nut To 1/4" Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 1/4″ Hosetail This high‑quality gas hose tail adaptor provides a secure connection from a 3/8″ BSP female threaded gas fitting to a 1/4″ hosetail — ideal for welding gas systems requiring step‑down connections. Precision machined for reliable sealing and durability, it’s a versatile and essential component for professional gas‑shielded welding setups. Key Features & Benefits 3/8″ BSP nut to 1/4″ hosetail — standard sizing for smooth transition between threaded fittings and hose Leak‑resistant connection — precision threads and hosetail profile ensure tight sealing Rugged construction — built to withstand workshop environments and repeated use Multi‑application — suitable for TIG, MIG, plasma and general gas delivery systems Applications Used to connect gas hoses to regulators, gas mixers, welding machines or other components where a 3/8″ BSP female thread must interface with a 1/4″ flexible hose. Ideal for routing gas lines in tight spaces or where hose reductions are needed. Compatibility Fits welding gas systems and accessories that use standard 3/8″ BSP threaded gas ports and 1/4″ internal diameter gas hose.

Starparts Gas Hose Tail 3/8" BSP Nut To 3/8" BSP Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 3/8″ BSP Hosetail This robust 3/8″ BSP nut to 3/8″ BSP hosetail gas hose tail provides a secure and reliable connection between gas hoses and fittings in welding and gas delivery systems. Precision‑manufactured for tight sealing and long‑lasting performance, it’s an essential component for professional TIG, MIG and gas welding setups. Key Features & Benefits 3/8″ BSP nut to 3/8″ BSP hosetail — standard sizing for compatibility with most welding gas hoses and fittings Secure fit — precision machining ensures a tight, leak‑resistant connection Durable construction — built to withstand workshop conditions and repeated use Versatile application — ideal for connecting regulators, gas lines and welding equipment Applications Perfect for linking gas hoses to regulators, gas mixers, welding machines or other gas system components where a 3/8″ BSP connection and hosetail fitting are required.   Compatibility Suitable for use in TIG, MIG and other gas‑shielded welding applications that utilise 3/8″ BSP threaded connections and flexible gas hoses

Starparts Gas Nut 3/8" BSP Right Hand Thread

Gas Nut – 3/8″ BSP Right Hand Thread Ensure a secure and leak-free connection in your welding gas delivery system with this high-quality 3/8″ BSP right hand thread gas nut. Precision machined for consistent fitment and durability, it’s an essential consumable for any TIG, MIG or gas welding setup. Key Features & Benefits Standard 3/8″ BSP right hand thread – compatible with a wide range of regulators, hoses and fittings Precision machined – ensures reliable, tight sealing to prevent gas leaks Durable construction – designed to withstand workshop environments and repeated assembly Versatile use – suitable for TIG, MIG and other gas-shielded welding applications Applications Used to secure and seal gas line connections on welding machines, regulators, gas hoses and accessories where a 3/8″ BSP right hand thread is required. Compatibility Fits any 3/8″ BSP right hand threaded gas port or fitting commonly found on welding equipment and gas system components.

Starparts Propane Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Propane Gas Hose 10mm (3/8") is a robust gas hose designed for use with compatible oxy-propane cutting, heating and brazing equipment in professional workshop, fabrication and industrial environments. Featuring a 10mm (3/8") bore, the hose is supplied complete with check valves and 3/8" fittings, providing a convenient solution for replacing worn or damaged hoses or setting up compatible oxy-fuel equipment. The incorporated check valves help prevent reverse gas flow within the system, providing an important additional safety feature. The larger 10mm bore is particularly suited to applications requiring increased gas flow, subject to the requirements of the torch and associated equipment. Suitable for regular professional use, this propane hose is an excellent choice for fabrication shops, engineering companies, maintenance departments and other environments using propane-fuelled cutting and heating equipment. Key Features Designed for propane gas applications 10mm (3/8") bore Supplied complete with 3/8" fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-propane equipment Ideal for cutting, heating and brazing applications Suitable for professional workshop and industrial use Robust construction for regular use Typical Applications Ideal for oxy-propane cutting, pre-heating, brazing, fabrication, engineering, maintenance and repair applications where a 10mm bore propane hose is required. Specification Product Type: Propane Gas HoseGas: PropaneBore Size: 10mm (3/8")Fitting Size: 3/8"Check Valves: IncludedApplication: Cutting, Heating & Brazing Please Note: Always ensure the hose, fittings, check valves and associated gas safety equipment are compatible with the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Oxygen Fitted Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings

Oxygen Fitted Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings Cutting & Welding Hose• All rubber hose manufactured & tested in accordance with ISO 3821: 2010• All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Oxygen Gas Hose 10MM(3/8") C/W Check Valves & 3/8" Fittings

Oxygen Fitted Gas Hose 10MM(3/8") C/W Check Valves • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings

The Acetylene Gas Hose 6mm (1/4") Bore is designed for use with compatible oxy-fuel welding, cutting, brazing and heating equipment, providing a reliable connection between your acetylene gas equipment and torch setup. Featuring a 6mm (1/4") internal bore, the hose is supplied complete with check valves and 1/4" fittings, providing a convenient ready-to-use solution for replacing worn hoses or setting up compatible gas welding and cutting equipment. The incorporated check valves provide an additional safety feature by helping to prevent reverse gas flow within the system. Its robust construction makes this hose suitable for regular use in professional workshops, fabrication environments, maintenance departments and engineering applications. Key Features Designed for acetylene gas applications 6mm (1/4") bore Complete with 1/4" fittings Supplied with check valves Check valves help prevent reverse gas flow Suitable for compatible oxy-fuel equipment Ideal for welding, cutting, brazing and heating applications Suitable for professional workshop and fabrication use Convenient replacement for worn or damaged acetylene hoses Typical Applications Suitable for use with compatible equipment for: Oxy-acetylene welding Gas cutting Brazing Heating Fabrication and engineering Maintenance and repair work Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 6mm (1/4")Fitting Size: 1/4"Check Valves: IncludedApplication: Oxy-Fuel Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings and safety devices are compatible with your gas equipment and operating pressures before use. Cutting & Welding Hose• All rubber hose manufactured & tested in accordance with ISO 3821: 2010• All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Fitted Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Acetylene Gas Hose 10mm (3/8") is a heavy-duty gas hose designed for use with compatible oxy-acetylene welding, cutting, brazing and heating equipment in professional workshop and industrial environments. Featuring a 10mm (3/8") bore, this hose is supplied complete with check valves and 3/8" BSP fittings, providing a convenient solution for replacing existing hoses or setting up compatible oxy-fuel equipment. The fitted check valves help prevent reverse gas flow, adding an important safety feature to the gas supply system. The larger 10mm bore makes this hose particularly suitable for applications requiring a higher gas flow, subject to the requirements of the equipment being used. Key Features Designed specifically for acetylene gas 10mm (3/8") bore Supplied with 3/8" BSP fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-acetylene equipment Ideal for welding, cutting, brazing and heating Suitable for professional workshop and industrial applications Robust construction for regular use Typical Applications Suitable for oxy-acetylene welding, gas cutting, brazing, heating, fabrication, engineering, maintenance and repair applications where a 10mm bore acetylene hose is required. Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 10mm (3/8")Fitting Size: 3/8" BSPCheck Valves: IncludedApplication: Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings, check valves and associated safety equipment are suitable for the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Flashback Arrestor In-Line Oxygen Regulator Side

Starparts G Tech Flashback Arrestor In-Line Oxygen Conforms to EN 730-1, ISO 5175  Avoids dangerous gas mixtures by a gas non return valve (NV)  Stops flashback through flame arrestor (FA)  A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Every safety device is 100% tested  A dust filter protects the gas non return valve against contamination   

Starparts Flashback Arrestor In-Line Fuel/Gas Regulator Side

Starparts GTech Flashback Arrestor In-Line For Fuel Gas Ensure maximum safety in your gas welding and cutting operations with the GTech Flashback Arrestor In-Line for Fuel Gas. Designed to prevent dangerous flashbacks, this essential safety device protects both operators and equipment by stopping reverse gas flow and potential explosions. Key Features: Reliable Flashback Protection – Effectively stops reverse gas flow to prevent dangerous accidents. In-Line Design – Easy to install within your fuel gas system for seamless operation. High-Quality Construction – Built for durability and long-lasting performance. Enhanced Safety Compliance – Meets industry safety standards for peace of mind. Compatible with Fuel Gases – Ideal for use in oxy-fuel applications, welding, and cutting setups. Whether you’re a professional welder or a workshop operator, the GTech Flashback Arrestor is a crucial safety addition to your setup. Keep your work environment secure and compliant with this high-performance, easy-to-install solution. Tech Specs: Conforms to EN 730-1, ISO 5175 Avoids dangerous gas mixtures by a gas non return valve (NV) Stops flashback through flame arrestor (FA) A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Every safety device is 100% tested A dust filter protects the gas non return valve against contamination 

Gas Y Piece Right Hand 3/8" BSP Thread For Oxygen / Argon Gas With Taps

Gas Y Piece Right Hand 3/8" BSP Thread For Oxygen / Argon Gas With Taps This Y Piece allows 2 outlets to be taken off from the regulator which can be independently isolated by the taps and also allows use of a purge line for Argon when TIG welding, commonly used in conjunction with a flow meter

Jasic Evo EM160C PFC Compact Inverter MIG Welder Package

Jasic EVO MIG 160 PFC Compact Inverter Introducing the Jasic EVO MIG 160 PFC Compact Inverter, which comes with a comprehensive 5-year warranty and delivers professional-grade welding performance with reliability you can trust. This package includes essential components: the Inverter Power Source, a 3-meter MIG Torch, a 3-meter Earth Cable and clamp, an Argon Regulator, and a Gas Hose, ensuring you have everything you need to get started right away. Designed for durability and ease of use, the Jasic EVO MIG 160 boasts a rugged, ergonomic design that enhances operational comfort and efficiency. Equipped with Clearvision Technology, welders can enjoy enhanced visibility, promoting precision and accuracy in their work. Experience intelligent welding with the integrated Synergic Control, which automatically adjusts parameters for optimal performance, streamlining the welding process. Thanks to its adaptable wide voltage range, this inverter easily caters to various welding needs. The inclusion of Welding Engineer Mode and Smart Lift TIG functionality further extends this machine's versatility, allowing for precise control and customization to suit specific welding tasks. Expect consistent and efficient MIG spot welding performance, ensuring high-quality welds every time. For added convenience, flexible remote control solutions are available as an optional feature, enhancing usability and adaptability. Featuring Power Factor Correction (PFC) and generator-friendly design, the Jasic EVO MIG 160 operates efficiently while minimizing energy consumption, making it an environmentally conscious choice. Quick factory reset capability and ultra-efficient auto sleep mode enhance operational efficiency, while compatibility with MIG digital torches and spool guns ensures versatility and adaptability to evolving welding needs. LED lighting inside the wire feeder cabinet, Active Balancing Air Passage (ABAP), and Fan-on-Demand cooling create a comfortable and productive working environment. Safety is paramount, and this inverter is equipped with a Voltage Reduction Device (VRD), key power component protection, and overcurrent and overheat protection, ensuring a secure and reliable welding experience. Elevate your welding capabilities with the Jasic EVO MIG 160 PFC Compact Inverter, a professional-grade solution designed to meet the demands of modern welding applications. Key Features: Rugged, ergonomic design Clearvision Technology Intelligent Synergic COntrol Adaptable wide voltage Welding engineer mode Smart lift TIG Consistent & efficient MIG spot welding  performance Flexible remote control solutions(optional) Power factor correction(PFC) Generator friendly Quick factory reset  Ultra efficient auto sleep mode Compatible with MIG digital torch & spool guns LED inside wire feeder cabinet ABAP- active balancing air passage Fan on demand cooling Voltage reduction device (VRD) Key power component protection Overcurrent & overheat protection

G-Tech Gas Equipment Starparts G-Tech NM48/75 Gas Cutting Torch

Starparts G Tech NM48/75 Extended Reach Cutting Torch    Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 48" Length

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 59 NiCrMo-13 TIG Filler Wire 5KG

Features and Applications Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. Versatile alloy with excellent wet corrosion resistance for the most demanding applications. The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s. Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 276, Alloy 686** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6059 - NiCr23Mo16 AWS A5.14 - ER NiCrMo-13   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max  max max max   0.010 0.50 1.50  0.020 0.005 0.08                 Ni% Co% Al% Cr% Mo%     56.00 max 0.10 22.00 15.00     min 0.30 0.40 24.00 16.50       Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Alloy C276 NiCrMo-4 TIG Filler Wire 5KG

Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4 AWS A5.14 - ER NiCrMo-4   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max max max max   0.05 0.80 0.70 0.030 0.010 0.75                 Cu% Ni% Co% Ti% Al%     max 93.00 max 2.00 max     0.20 min 1.00 3.50 1.00       Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 82 NiCr-3 TIG Filler Wire 5KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 625 NiCrMo-3 TIG Filler Wire 5KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni% Co% Al% Ti% Cr% Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER80S-Ni1 Low Temp Mild Steel TIG Filler Wire 5KG

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.09 0.70 1.20 <0.150 <0.150 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 1.00 <0.15 <0.200 <0.030 <0.50   Mechanical Properties (Typical) Tensile Strength 600 MPa   Yield Strength 480 MPa   Elongation 26%   Impact Strength 100 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER317L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire used for welding alloys of a similar chemical composition. Ideal for severely corrosive environments where crevice and pitting corrosion are of concern. Low carbon content reduces the possibilities of intergranular carbide precipitation. Not suitable for structural service above 400°C or for cryogenic applications. Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance. Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.    Typical Base Materials Stainless CrNiMo steels e.g. 317L or similar** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 15 3 L AWS A5.9 - ER 317 / 317L   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.43 0.45 <0.030 <0.030                   Ni% Cr% Mo% Cu%       13.60 18.82 3.55 <0.75         Mechanical Properties Tensile Strength ≥480 MPa   Yield Strength ≥300 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER307Si Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER120S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.110 0.70 1.90 <0.015 <0.015 <0.25 0.50               Ni% Mo% Al% V% Ti% Zr%   2.50 0.50 <0.010 <0.030 0.08 <0.050     Mechanical Properties (Typical) Tensile Strength 1040 MPa   Yield Strength 960 MPa   Elongation 16%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER100S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications NiCrMo fine-grained steels for low temperature high strength applications. Extreme crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub-zero temperatures down to -50°C. Typically used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3NiCrMo AWS A5.28 - ER 100S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.08 0.75 1.40 <0.015 <0.015 <0.25 0.55               Ni% Mo% Al% V% Ti% Zr%   0.60 0.25 <0.020 <0.020 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 730 MPa   Yield Strength 640 MPa   Elongation 20%   Impact Strength 50 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG

Product Overview The Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG is a high-strength aluminium filler metal designed for TIG welding of aluminium-magnesium alloys. Manufactured to deliver reliable weld quality and consistent mechanical performance, ER5556 filler wire is widely used in fabrication where higher weld strength and good corrosion resistance are required. This filler wire contains approximately 5% magnesium with manganese additions, providing strong weld deposits with excellent toughness and resistance to corrosion, particularly in marine and outdoor environments. Supplied in a convenient 2.5 kg pack of TIG rods, it is suitable for both workshop fabrication and production welding applications.   Typical Base Materials 5xxx alloys, such as AlMg4.5Mn, AlMg5, AlMg5Mn, AlMg2.7Mn, AlMgSi1* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5556 (AlMg5Mn1Ti) / Al5556A (AlMg5Mn) AWS A5.10 - ER 5556 / ER 5556A

Weldmig Aluminium MIG Wire ER5356 AlMg5 0.5KG Spool Gun Reel

Good For Welding Of the following Parent Metals: 5000 series alloys (AlMg) with Mg<4%, 6000 (AlMgSi) alloys when anodised. Cast alloys of AlSi -Mg type. In practice the most versatile & universally used filler metal Welding Process: MIG Shielding Gas: Argon Anodising Quality: Excellent Corrosion Resistance: Excellent (Very good in marine applications)

Weldmig Aluminium MIG Wire ER4043 AlSi5 0.5KG Spool Gun Reel

Good For Welding Of the following Parent Metals: AlMgSi (6000 series) alloys e.g. 6063, 6082 cast alloys of aluminium silicon type Welding Process: MIG Shielding Gas: Argon Anodising Quality: Poor Corrosion Resistance: Good (Depending on parent alloy)

Weld Star ER347Si Stainless Steel MIG Wire 15KG

Stainless Steel Grade ER347Si: ER347Si is a type of stainless steel MIG wire that is specifically designed for welding and joining stainless steel components. It belongs to the austenitic family of stainless steels and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: ER347Si wire is used in the MIG (Metal Inert Gas) welding process, also known as Gas Metal Arc Welding (GMAW). MIG welding utilizes a consumable wire electrode and an inert gas, such as argon or a mixture of argon and carbon dioxide, to shield the weld pool from atmospheric contamination. ER347Si MIG Wire: ER347Si MIG wire is formulated with a specific composition suitable for welding stainless steel grade 347 or similar materials. The "ER" prefix indicates that it is an electrode or rod used for welding, and the "Si" signifies the addition of silicon in its composition. Low Carbon Content: ER347Si MIG wire contains a low carbon content to minimize the risk of carbide precipitation and intergranular corrosion during welding. This makes it well-suited for applications where the welded joints will be exposed to corrosive environments. Silicon Addition: The inclusion of silicon in ER347Si wire improves the fluidity of the weld pool, facilitating good wetting and penetration during welding. It also contributes to stable arc characteristics and reduced spatter. Welding Applications: ER347Si MIG wire is commonly used for welding stainless steel components in various industries, including petrochemical, power generation, food processing, and automotive. It is suitable for joining stainless steel pipes, tanks, and equipment exposed to high temperatures and corrosive environments. Compatibility: ER347Si MIG wire is typically used with stainless steel grade 347 base metal or similar stabilized austenitic stainless steels. Grade 347 stainless steel offers improved resistance to intergranular corrosion and sensitization due to the addition of niobium (columbium). Shielding Gas: When using ER347Si MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. Remember to follow the manufacturer's recommendations and welding procedures to ensure proper welding results and performance when using ER347Si stainless steel MIG wire.

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG   Features & Benefits Stainless Steel Grade 316LSi: Grade 316LSi is a low-carbon variation of stainless steel grade 316. It is an austenitic stainless steel, which means it is non-magnetic and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: MIG (Metal Inert Gas) welding, also known as Gas Metal Arc Welding (GMAW), is a popular welding process that uses a consumable wire electrode and an inert gas, typically argon or argon mixtures, to shield the weld pool from atmospheric contamination. 316LSi MIG Wire: 316LSi MIG wire is specifically designed for MIG welding applications that involve stainless steel grade 316 or similar materials. The "LSi" in its name stands for "low carbon, silicon added," indicating its composition and improved weldability. Low Carbon Content: The low carbon content in 316LSi MIG wire helps to minimize carbide precipitation during welding, which can lead to intergranular corrosion. This makes it suitable for applications where post-welding exposure to corrosive environments is a concern. Silicon Addition: The addition of silicon to the wire enhances the fluidity of the weld pool and promotes good wetting and penetration characteristics. It also contributes to improved arc stability and reduced spatter during welding. Welding Applications: Grade 316LSi MIG wire is commonly used for welding stainless steel components in various industries, including chemical processing, food and beverage, pharmaceuticals, marine applications, and architectural structures. It is suitable for joining stainless steel plates, sheets, pipes, and fittings. Compatibility: 316LSi MIG wire is typically used with the same grade of base metal, such as 316 stainless steel or similar austenitic stainless steels. It provides good corrosion resistance in a wide range of environments, including those with exposure to acids, chlorides, and marine conditions. Shielding Gas: When using 316LSi MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. It's important to follow the manufacturer's guidelines and welding procedures when using stainless steel MIG wire grade 316LSi to ensure proper weld quality and performance.

Vortex Mapp Gas MAP-X Gas

Vortex Mapp-X Gas (VG1) – 400g Canister High-Performance Fuel for Soldering & Brazing Applications The Vortex Mapp-X Gas (VG1) is a premium-grade fuel designed for professionals requiring high-temperature capabilities in soldering and brazing tasks. Contained in a 400g non-refillable canister, this gas mixture delivers a consistent and intense flame, making it suitable for various industrial applications. Key Features: High-Temperature Performance: Burns up to 10% hotter than standard Map-style gases, ensuring efficient heat application for demanding tasks. Optimized Mixture: Composed primarily of propylene and propane, providing a stable and powerful flame. Compatibility: Designed for use with most CGA600 threaded torches, offering versatility across different equipment. Safety Compliance: Manufactured to meet stringent safety standards, ensuring reliable and secure usage. Typical Applications: Soldering & Brazing: Ideal for joining metals in plumbing, HVAC, and automotive industries. Metalworking: Suitable for tasks requiring precise heat application, such as heat treating and surface preparation. DIY Projects: Perfect for home improvement tasks involving metal components. Specifications: Product Code: VG1 Weight: 400g Type: Non-refillable canister Gas Composition: Propylene and propane mixture Thread Type: CGA600 Safety Classification: Flammable gas, under pressure Usage Instructions: Preparation: Ensure the work area is well-ventilated and free from flammable materials. Connection: Attach the canister securely to a compatible CGA600 threaded torch. Operation: Ignite the torch according to the manufacturer's instructions, adjusting the flame as needed for the task. Storage: After use, close the valve and store the canister in a cool, dry place away from direct sunlight and heat sources.

TIG Aesthetics By TICON Silicone TIG Trailing Shield

Why we love the trailing shield from TIG Aesthetics:  TIG Aesthetics and Ticon Industries are eager to announce the latest Innovation in our TIG welding lineup! The TIG Aesthetics Trailing Shield. It is the Ultimate solution for welding aerospace grade metals where an inert environment is required. Manufactured from high temperature silicone, the Trailing Shield withstands the heat absorbed by any #16 or 1" welding cup and will hold its structural integrity to 100+ amp welds. The Trailing Shield also includes a built in drag bar on the tail of the shield to assist in the prevention of direct heated material contact. -please note that the silicone body is meant to hover above and not make contact with the actual weld seam-  Our proven, multi-layer screen diffuser combined with the shower head diffuser fitting integrate seamlessly with the silicone while providing additional rigidity to the body of the shield; providing excellent argon diffusion to the weldment. The reinforced screen diffuser allows for the radius to be adjusted by slightly bending the stainless steel diffuser.  User setup tips and tricks: Included hose retention tab is designed to snap on to the back cap and align the argon inlet hose perfectly straight into the shield body, ensuring consistent results when manipulating torch angle during the weld process. (we recommend using TIG Aesthetics 6mm Argon Purge line) Recommended gas flow for the Trailing Shield is 15-20 SCFH *dependent on weldment and environment* Ensure a proper setup by running a test pass on some scrap material to solidify personal preference on flow and speed. Included in the TIG Aesthetics Silicone Trailing Shield Kit: Silicone trailer chassis - Red x 1Stainless Steel Mesh Diffuser x 1Titanium Shower Head Diffuser fitting x 1Titanium Hose Retention Tab x 1

Furick SSBBW Ceramic TIG Cup Size #19

Furick SSBBW Ceramic TIG Cup Size #19 The Furick SSBBW Ceramic TIG Cup Size #19 is a premium large-diameter ceramic nozzle designed to provide exceptional shielding gas coverage for high-quality TIG welding applications. Engineered for use with Furick gas lens systems, the #19 cup delivers an expansive gas envelope, making it ideal for welding stainless steel, aluminium, titanium and other materials where superior weld appearance and contamination protection are essential. Manufactured from high-quality, heat-resistant ceramic, the SSBBW cup is built to withstand the demands of professional fabrication while maintaining excellent durability and consistent performance. Its large bore design allows greater shielding gas coverage, helping to minimise atmospheric contamination, improve weld quality and produce clean, aesthetically pleasing welds, particularly on critical joints and high-specification fabrications. Favoured by professional TIG welders, motorsport fabricators and precision engineers, the Furick SSBBW Ceramic TIG Cup Size #19 is particularly suited to applications requiring extended tungsten stick-out and improved visibility of the weld pool when used with a compatible gas lens setup. Features & Benefits Premium #19 ceramic TIG cup. Designed for use with compatible Furick gas lens systems. Provides exceptional shielding gas coverage. Large bore design for improved weld protection. Ideal for extended tungsten stick-out applications. Manufactured from durable, heat-resistant ceramic. Produces cleaner welds with reduced risk of contamination. Excellent visibility of the weld pool for improved control. Suitable for stainless steel, aluminium, titanium and other TIG weldable materials. Ideal for professional fabrication, motorsport and precision welding. Ideal Applications Stainless steel TIG welding Aluminium fabrication Titanium welding Food-grade and hygienic fabrication Pipe welding Motorsport fabrication Aerospace engineering Precision TIG welding Whether you're fabricating stainless steel pipework, welding aluminium components or producing high-end TIG welds, the Furick SSBBW Ceramic TIG Cup Size #19 delivers the superior gas coverage and weld quality trusted by professional welders around the world. THE SSBBW  will need 35-50 CFH of Argon Recomended for Titanium , Inconel and Stainless Steel Mounts on a 45V44  for a 9/20  size Torch or 17 Torch Mount Kit  for a 17 Torch

TIG Aesthetics By Ticon Full Silicone Purge Plug Kit

Why We Love The Ticon Industries Full Purge Kit From Tig Aesthetics  Ticon Industries has teamed up with Tig Aesthetics to offer the ultimate solution for back purging. Manufactured out of high temperature silicone, these plugs can withstand the heat of a weld seam from 1″ away. Each plug comes with a multi layer stainless steel diffuser for eliminating turbulence inside the tube/pipe while maximizing the efficiency of argon consumed. To top it all off, we included our special Ticon touch and included our hyper lightweight titanium 0.5mm wall argon inlet tubes. Included in the Complete Silicone Purge Plug Kit: Exhaust Kit2.5″ Silicone Pipe Plug – Yellow x 23″ Silicone Pipe Plug – Green x 23.5″ Silicone Pipe Plug – Cyan x 24″ Silicone Pipe Plug – Blue x 2 Header Kit1.5″ Silicone Pipe Plug – Blue x 21.88″-2″ Silicone Pipe Plug – Magenta x 2 Turbo Manifold Kit1.25″ Silicone Pipe Plug – Magenta x 21.5″ Silicone Pipe Plug – Blue x 22″ Silicone Pipe Plug – Red x 2 Stainless Steel Mesh Diffuser x 18Titanium Argon Inlet Tubes x 9

Wilkinson Star Weld Star ER80S-Ni1 Low Temp MIG Wire 15KG 300MM Reel

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Precision layer wound for superior wire feeding characteristics. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1

CK Worldwide CK 3 Series Complete Pyrex Gas Saver Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 3 Series Complete Pink Ceramic Cup Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 2 Series Complete Pyrex Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available.   Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body. Part # Description Quantity 2P8GS CK #8 Pyrex Cup - 2/3 Series Gas Saver, 12.7mm bore x 32.6mm length 1 2C040GS CK Wedge Collet - 2 Series Gas Saver, 1.0mm 1 2HSGS CK Standard Heatshield - 2 Series Gas Saver 1 2CBGS CK Standard Collet Body - 2 Series Gas Saver, One Size Fits All 1 TAS040GS CK Tungsten Adapter - 2/3 Series Gas Saver, 1.0mm 1

CK Worldwide CK 2 Series Complete Pink Ceramic Front End Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK300 3 Series Flexi Head Watercooled Tig Torch 350A

CK300 3 Series Flexi Head Watercooled Tig Torch 350A Most popular water-cooled torch Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable

Hypertherm Powermax 45 XP Plasma Cutter Package 240V C/W 6.1M Torch

Powermax45 XP plasma cutter The Powermax45® XP delivers increased cut capacity – up to 16 mm (5/8″) metal – as well as faster cut speeds, and automatic gas adjustment for quick, simple setup and operation. Duramax® Lock torches support handheld and mechanized cutting of a wider range of metal thicknesses, along with precision gouging such as spot weld removal, and marking capabilities.

BÖHLER Bohler 1.2MM DiamondSpark 46 RC Flux Cored MIG Wire 16KG 300MM Metal Reel

DiamondSpark 46 RC Seamless cored wire Low hydrogen all-positional seamless rutile flux cored wire for welding carbon-manganese and fine grain steels using Argon-CO2 or pure CO2 shielding gas. DiamondSpark 46 RC is a seamless copper-coated rutile flux-cored wire, developed for modern shipyard requirements and daily construction challenges. The wire has excellent weldability, productivity for welding of low and medium alloyed steels using Argon-CO2 shielding gas or pure CO2. The weld deposit has excellent mechanical properties till -30°C in mix gas and till -20°C in pure CO2 shielding gas. DiamondSark 46 RC is approved with both shielding gases in the grade 3YSH5 and the hydrogen level guarantee is below 4 ml/100 g, tested at 27°C , 80%HR for 12 weeks without any increase.   Product Features: Seamless design Extremely clean manufacturing process Ultra-low-hydrogen weld metal Total resistance against moisture absorption during storage and use Optimal protection against hydrogen cracking No porosities observed Faster painting process Fast freezing rutile slag system Enhancing travel speed and arc stability in positional welding Productive positional welding Automatic slag detachability Wide parameter window More spray arc welding Easy arc setting Easy welding in overhead position Excellent feedability Low contact tip wear Trustable performance with long welding cable Less down-time for maintenance No wire breaks Stable arc Sharp arc Low spatter Good weldability Good wetting Less post-weld cleaning Very flat root pass No undercut Copper coated Excellent current transfer Rust resistance Easy handling Safer storage Designed chemistry Excellent CVN impact toughness down to –30°C mix gas and to -20°C in pure CO2 Highest welding performance in welding travel speed in particular in PF position Low fume emission Wide margin to cover both strength and CVN impact requirements Faster weld execution Healthy working place   Typical Applications: General construction Shipbuilding  

G-Tech Gas Equipment Gtec Single Flint Lighter With 5 Flints

SIngle Flint Lighter With 5 Flint Refills 

G-Tech Gas Equipment Gtec MIG Tip Nozzle Cleaner In Metal Case

Gtec MIG Tip Cleaner in Metal Case Essential Maintenance Tool for Prolonged MIG Torch Life and Consistent Weld Quality The Gtec MIG Tip Cleaner is a compact, reliable tool designed for cleaning and maintaining MIG welding contact tips. Housed in a durable metal case, this cleaner ensures your MIG tips remain free from spatter build-up, oxidation, and debris—improving electrical conductivity and ensuring stable arc performance. The rugged metal case keeps the reamers neatly stored and protected, while also doubling as a convenient handle for improved grip during cleaning. This is an essential tool for any welder looking to extend tip life, reduce downtime, and maintain optimal MIG torch performance. Key Features: Improves Arc Stability: Ensures smooth wire feed and consistent electrical contact Durable Metal Storage Case: Protects tools and provides a stable grip during use Compact and Portable: Fits easily into a toolbox or welding station drawer Extends Tip Life: Reduces spatter-related damage and helps maintain tip shape Easy to Use: Simple manual operation—no power or complex setup required Applications: MIG welding tip maintenance Cleaning contact tips in industrial, automotive, or fabrication settings Suitable for steel, stainless, and aluminum welding operations Typical Users: Professional welders Maintenance engineers Fabricators Workshop technicians   The Gtec MIG Tip Cleaner in Metal Case is a must-have addition to any welder’s toolkit—keeping your equipment in top condition and ensuring every weld starts clean and finishes strong.

G-Tech Gas Equipment Spindle Key

Starparts G Tech Spindle Key The Spindle key (cylinder key) is designed for the easy opening and closure of cylinder valves.To open a cylinder valve, simply rotate the spindle anti-clockwise using this spindle key. Turn clockwise to securely close the cylinder. Easy and safe opening and closure of cylinders  Fits square valve cylinders

G-Tech Gas Equipment Gtech Type 5 Gas Welding & Cutting Set In Carry Case

Starparts G-Tech Type 5 Welding & Cutting Set Versatile, Professional-Grade Oxy/Acetylene Kit for Welding, Cutting & Heating Operations The Starparts G-Tech Type 5 Welding & Cutting Set is a complete, heavy-duty gas welding and cutting kit designed for the demanding needs of modern fabrication, engineering, and maintenance environments. Engineered with durability, flexibility, and safety in mind, this set features Type 5 connections, allowing quick adaptation between welding, cutting, and heating tasks using the same ergonomic handle and mixer system. At the core of the kit is the Type 5 shank, a robust handle compatible with the included cutting attachment, welding mixer, and swaged welding nozzles. Combined with high-quality twin-gauge G-Tech regulators for precise gas control, 5m fitted hoses, flashback arrestors, and a full accessory set, this kit delivers everything needed for a wide range of oxy/acetylene gas processes. Neatly packaged in a stainless steel tool case, the set is portable, protective, and easy to transport—ideal for mobile welders, fabrication shops, and on-site maintenance teams. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Propane 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Propane 18/90 Cutting Set Complete, Heavy-Duty Gas Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Propane 18/90 Cutting Set is a premium, all-in-one gas cutting solution designed for professional metalworkers, fabricators, and site engineers. Housed in a durable stainless steel tool case, this complete kit is ready for immediate use with everything required for oxy/propane flame cutting operations—ideal for cutting ferrous metals with precision, safety, and efficiency. At the heart of the set is the trusted NM 18/90 cutting torch, known for its robust design, high flow rate, and reliable performance. Paired with single-stage, high-quality G-Tech regulators for both oxygen (300 bar) and propane (25 bar), the system ensures consistent and safe gas delivery under demanding conditions. This comprehensive kit also includes oxygen and fuel flashback arrestors, pre-fitted 10m hoses with 3/8" check valves, and two PNM cutting nozzles for different material thicknesses. A flint lighter and combination spanner add convenience, making the kit truly ready for action on arrival. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Acetylene 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set Complete Industrial-Grade Flame Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set is a fully equipped, high-performance gas cutting solution designed for industrial fabricators, engineers, and mobile welders. Built to handle demanding cutting tasks with speed and precision, this all-in-one kit provides everything required for professional oxy/acetylene cutting—neatly packed in a rugged stainless steel tool case. At the core of the set is the dependable NM 18/90 cutting torch, a proven industry standard renowned for its balanced design, powerful flame profile, and durability in tough environments. The kit includes G-Tech single-stage oxygen and acetylene regulators, delivering stable pressure control up to 300 bar (oxygen) and 25 bar (acetylene), ideal for precise flame adjustment. Also included are in-line flashback arrestors, 10m fitted hoses, and two ANM cutting nozzles to cover a range of material thicknesses. A flint lighter and combination spanner round out the kit, offering true "ready-to-go" functionality. Kit Contents:

G-Tech Gas Equipment Gtech Oxygen Re-Settable Flashback Arrestor Regulator Mounted

Starparts GTech Flashback Arrestor Resettable Oxygen Conforms to EN 730-1, ISO 5175 Stops flashback through flame arrestor (FA) Avoids dangerous gas mixtures by a gas non return valve (NV) A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV) Interrupts the further gas flow on pressure shocks by a resettable pressure sensitive cut-off valve (PV) Every safety device is 100% tested A dust filter protects the gas non return valve against contamination  

G-Tech Gas Equipment G-tech Fuel Flashback Arrestor Re-settable Regulator Mounted

Starparts G Tech Flashback Arrestor Resettable Fuel Gas Conforms to EN 730-1, ISO 5175  Stops flashback through flame arrestor (FA)  Avoids dangerous gas mixtures by a gas non return valve (NV)  A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Interrupts the further gas flow on pressure shocks by a resettable pressure sensitive cut-off valve (PV)  Every safety device is 100% tested  A dust filter protects the gas non return valve against contamination   

Starparts Argon/Co2 Gas Flow Meter With 3/8" BSP Fittings

Argon/CO₂ Gas Flow Meter – 3/8" BSP Fittings The Argon/CO₂ Gas Flow Meter is a precision instrument designed for accurate monitoring and regulation of shielding gas flow in MIG, TIG, and MAG welding applications. Ideal for both professional and workshop use, it ensures optimal gas coverage, improving weld quality and reducing porosity. Constructed from durable materials, this flow meter features a clear, easy-to-read scale and a stable rotameter for precise flow measurement. With 3/8" BSP fittings, it is compatible with a wide range of standard gas cylinders and welding setups, making it a versatile choice for controlling argon, CO₂, or mixed gases. Key Features: Accurate argon/CO₂ gas flow measurement for MIG/TIG welding Clear rotameter scale for easy reading Durable construction for long-lasting use 3/8" BSP fittings for universal compatibility Improves shielding gas efficiency and weld quality Typical Applications: MIG Welding | TIG Welding | MAG Welding | Workshop Use | Industrial Fabrication Type: Gas Flow Meter Gas Compatibility: Argon, CO₂, and Mixed Gases Fittings: 3/8" BSP Ranges Available: 0-14LPM 0-25LPM 0-40LPM

Harris 6290 VVC Cutting Nozzle

Harris 6290 VVC Cutting Nozzle The Harris 6290 VVC Cutting Nozzle is a high-performance, precision-engineered consumable designed for oxy-fuel cutting applications. Manufactured by Harris, it provides clean, accurate cuts and consistent flame control, making it ideal for professional welders, fabricators, and maintenance technicians. Constructed from durable, heat-resistant materials, the 6290 VVC nozzle ensures long service life even under frequent, high-temperature use. Its robust design delivers reliable performance across a wide range of mild steel and ferrous metal cutting tasks in industrial and workshop environments. Key Features: Precision-engineered Harris cutting nozzle Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard oxy-fuel cutting equipment Ideal for fabrication, industrial workshops, and maintenance applications Typical Applications: Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Harris Model: 6290 VVC Type: Cutting Nozzle Features: Minimizes kerf Increases Cutting Speed Reduces Heat Input High Quality Machine Cuts Reduces Afterwork Used with Low-cost Fuel Gases

3 Wheels Tyre Oxygen/Propane Cylinder Trolley

Solid Tyre Single Propane Cylinder Trolley

Solid Tyre Single Propane Cylinder Trolley Propane single cylinder trolley used for the safe transport and handling of size E propane gas bottles. Features include solid tyre wheels, chain and rubber grips. Dimensions: 850 x 340 x 290mm Weight approximately 11kg

Solid Tyre Y-Type Oxygen/Acetylene Cylinder Trolley

Solid tyre Y-type oxygen / acetylene cylinder trolley Key Features:  Designed to take half size bottles Cylinder Types: Oxygen Y and Acetylene J   Trolley Dimensions: 660mm x 470mm x 190mm  

Solid Tyre Heavy Duty Oxygen/Acetylene Midi Flame Pack Cylinder Trolley

Solid tyre heavy duty oxygen/ acetylene midi-flame cylinder trolley

Solid Tyre Oxygen/Acetylene Cylinder Trolley

Solid Tyre Oxygen/Acetylene Cylinder Trolley Twin cylinder oxy/acetylene trolley for transporting industrial gas bottles. Cylinder Types:Oxygen W and Acetylene F G H Trolley Dimensions:850mm x 590mm x 250mm

16" Pneumatic Tyre Oxygen/Acetylene Cylinder Trolley

16” pneumatic tyre oxygen/acetylene cylinder trolley

Solid Tyre Oxygen/Propane Cylinder Trolley

Solid Tyre Oxygen/Propane Cylinder Trolley Oxy/acetylene or oxy/propane twin cylinder trolley with 16″ pneumatic tyres ideally suited for transporting cylinders over rough or uneven ground. Oxy/Acetylene Trolley:Cylinder Types: Oxygen W and Acetylene F G HTrolley Dimensions: 890mm x 590mm x 250mm Oxy/Propane Trolley:Cylinder Types: Oxygen W and Propane ETrolley Dimensions: 850mm x 690mm x 310mm

Weldgas Light Weight Cutting & Welding Kit In Carry Case

Kit includes: • S/S 2g Oxygen regulator • S/S 2g Acetylene regulator • Oxygen FBA • Fuel gas FBA • Lightweight shank • Lightweight cutting attachment • Lightweight mixer • Lightweight swaged nozzles: 1,3,5,10,13 • Nozzle cleaners • Triple flint lighter • AFN 1/32 and 3/64 nozzle • DF combi spanner 28-21mm UK type

Weldgas Type 5 Cutting & Welding Kit In Carry Case

Kit includes: • S/S 2g Oxygen regulator • S/S 2g Acetylene regulator • Oxygen Flashback Arrestor • Fuel gas Flashback Arrestor • Type 5 shank • Type 5 cutting attachment • Type 5 mixer chamber • Type 5 swaged nozzles: 1,3,5,10,13 • Nozzle cleaners • Triple flint lighter • ANMS 3/64 and 1/16 nozzles, • DF combi spanner 28-21mm UK type

CK Worldwide CK Flexloc FL230 2 Series Water Cooled TIG Torch

The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes. 360 degree variable angle torch head Locks in any position Interchangeable head allows different configurations and head sizes Great for “walking the cup” on open root welds for pipe cutting Access hard to reach welds ergonomically Helps prevent carpal tunnel syndrome Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable   3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable

Furick BBW KOKN Ceramic TIG Cup Kit

Furick BBW Ceramic Cup Kit for 2.4mm The Furick BBW KOKN Ceramic TIG Cup Kit is a premium accessory set designed to deliver superior gas coverage and arc stability for precision TIG welding. Made from high-quality ceramic, the BBW (Big Bore Window) cup provides excellent durability, thermal resistance, and visibility, making it ideal for critical welds on stainless steel, titanium, and other sensitive materials.   Perfect for professional fabricators, stainless steel specialists, and those working in industries requiring ultra-clean welds, the Furick BBW KOKN Ceramic TIG Cup Kit ensures consistent performance, improved shielding, and extended service life. The Furick BBW ceramic cup threads on 45v44 gas lens if a welder has a 9, 20 torch and/or if one has 17, 18, 26 torches. Please purchase the adapter kit if the latter applies. This cup is recommended for DC applications and 3/32 tungsten only. This will provide excellent results with 30 CFH of argon flow.

CK Worldwide CK510 500Amp Watercooled TIG Torch With Superflex Cables

CK510 Water Cooled 500amp ACHF or DCSP @ 100%, 23.5cm (9-1/4 in), 191gm. 3 Series or 51 Series Head Accessories Applications: High amperage welds, heavy aluminium, heavy copper, job shops requiring a versatile torch using 0.5mm to 6.4mm tungsten. Smallest 500amp water-cooled torch at 100% duty cycle Most versatile water-cooled torch available Large water jacket cools torch more efficiently Cooler running torch allows longer life of electrodes Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon cable Blue water cable Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

Gas Bottle Cylinder Key

The UK Spec Gas Bottle Cylinder Key is a simple and essential workshop tool designed for opening and closing compatible industrial gas cylinder valves. Ideal for welding, fabrication, engineering and maintenance environments, the cylinder key provides a convenient way to operate compatible gas bottle valves without relying on unsuitable tools. Its compact design makes it easy to keep alongside welding equipment, regulators and gas bottles, ensuring a suitable cylinder key is readily available when changing bottles or shutting down equipment. A useful addition to any professional fabrication shop, welding workshop, mobile welding setup or engineering department using compatible UK industrial gas cylinders. Key Features UK specification gas bottle cylinder key Designed for compatible industrial gas cylinder valves Quick and easy to use Compact and convenient workshop tool Ideal for keeping with welding and gas equipment Suitable for professional and industrial environments Useful for welding, fabrication and maintenance applications Ideal as a replacement or spare cylinder key Typical Applications Ideal for welding workshops, fabrication shops, engineering departments, maintenance teams and mobile welding setups using compatible industrial gas cylinders. Specification Product Type: Gas Bottle / Cylinder KeySpecification: UK SpecApplication: Opening & Closing Compatible Gas Cylinder ValvesSuitable For: Welding, Fabrication, Engineering & Industrial Use Please Note: Gas cylinder valve designs can vary. Always check that the key is compatible with your specific cylinder valve before use. Also Fits Most Regulator Nuts 

F-Tech 400A Air Cooled Fume Extraction Torch

Giving the user maximum extraction efficiency at the welding source The F-Tech range of Fume extraction torches are manufactured in Europe and offer a choice of air and water cooled fume torches in 3, 4 and 5 metre with euro fitting. KEY FEATURES Direct extraction at the arc to reduce the welder's exposure to hazardous welding fumes Simple extraction control at the front of the handle Lightweight and well balanced design for user comfort Patented optimal torch cooling - high durability The torch is ready to use for easy connection to the welding machine and extraction unit F-Tech 400A Fume Extraction Torch Air Cooled - Euro Connection Duty Cycle: 400A @ 60% (CO²) 300A @60% (Argon) Extraction Rate 70m³/h 0.8mm - 1.6mm Wires

F-Tech 300A Air-cooled Fume Extraction Torch

Giving the user maximum extraction efficiency at the welding source The F-Tech range of Fume extraction torches are manufactured in Europe and offer a choice of air and water cooled fume torches in 3, 4 and 5 metre with euro fitting. KEY FEATURES Direct extraction at the arc to reduce the welder's exposure to hazardous welding fumes Simple extraction control at the front of the handle Lightweight and well balanced design for user comfort Patented optimal torch cooling - high durability The torch is ready to use for easy connection to the welding machine and extraction unit F-Tech 300 Amp Fume Extraction Torch Air Cooled - Euro Connection Duty Cycle: 300A @ 60% (CO²) 200A @60% (Argon) Extraction Rate 80m³/h   0.8mm - 1.2mm Wires

SIF No.985 Silicone Copper TIG Brazing Rods

A high-quality copper TIG rod for full fusion welding of deoxidised copper sheet. The deposit is easy flowing and the finished weld is free from copper oxide inclusions. Commonly used in TIG welding for fabrication and repairs of copper pipes, tanks, buzz-bars, etc Used in a variety of coppersmith applications. Also provides good electrical conductivity so is often used in machinery construction and conductor manufacture.  Materials To Be Welded SifSilCopper 985 delivers a viscous weld pool and is typically best used on oxygen-free copper types. A pre-heat may be required on material thicknesses over 50mm (to a maximum of 50°C)

G-Tech Gas Equipment Gtech Argon/CO2 Regulator 2 Stage 2 Gauge 300Bar Bottom Entry

Gtech Argon/CO₂ Regulator – 2 Stage, 2 Gauge, 300 Bar Bottom Entry The Gtech Argon/CO₂ 2 Stage Regulator (2 Gauge, 300 Bar, Bottom Entry) is a premium gas control regulator designed to deliver exceptionally stable pressure and flow for critical MIG/MAG and TIG welding applications. Its two-stage design provides superior performance by reducing cylinder pressure in two steps, ensuring a constant outlet pressure even as the cylinder pressure drops—perfect for precision welding and long-duration jobs. Built from high-quality brass for strength and corrosion resistance, this regulator features a bottom-entry configuration, making it ideal for use with 300 Bar cylinders in tight or vertical setups. The dual gauges offer clear, at-a-glance readings of cylinder pressure and working/flow pressure, giving welders precise control over shielding gas delivery. Key Features: Two-stage regulation – delivers consistent outlet pressure throughout the cylinder’s life. Dual gauge display – easy monitoring of both cylinder pressure and outlet/flow pressure. Rated for 300 Bar cylinders – suitable for high-pressure Argon and Argon/CO₂ mixes. Bottom-entry design – ideal for vertical cylinder setups or confined spaces. Precision-machined brass construction – excellent durability and corrosion resistance. Fine adjustment control – ensures accurate gas flow for optimum weld quality and gas economy. Safety relief valve – protects against over-pressurisation.   Perfect for fabrication shops, industrial welding, and high-pressure applications, the Gtech Argon/CO₂ Regulator – 2 Stage, 2 Gauge, 300 Bar Bottom Entry provides the reliability and accuracy professionals demand for critical welding operations.

G-Tech Gas Equipment Gtech Oxygen Regulator 2 Stage 2 Gauge

Gtec Bottom Entry Two Stage 2 Gauge Oxygen Regulator 300 Bar Two-Gauge Bottom Entry Oxygen Regulator. Designed for professional use, this robust and reliable regulator ensures optimal performance for welding, cutting, and other oxygen-based applications. Key Features: Two-Stage Regulation: Delivers consistent output pressure, even as cylinder pressure drops, ensuring a stable flow for precision tasks. Dual Gauges: Clear, easy-to-read gauges display both cylinder pressure and output pressure, providing full control and monitoring at a glance. Bottom Entry Design: Compact and ergonomic configuration for streamlined cylinder attachment and enhanced workspace efficiency. Durable Construction: Engineered with high-quality materials for long-lasting performance, even in demanding environments. Safety Focused: Built-in safety features meet industry standards for peace of mind during use. Whether you're a seasoned professional or an occasional user, the GTech Two-Stage Oxygen Regulator is a dependable addition to your toolkit, delivering efficiency and reliability every time.

G-Tech Gas Equipment Gtech Acetylene Regulator 2 Stage 2 Gauge

Gtec Bottom Entry Two Stage 2 Gauge Acetylene Regulator 25 Bar

G-Tech Gas Equipment Gtech Oxygen Regulator Single Stage 2 Gauge 300 Bar Side Entry

Gtec Single Stage 2 Gauge Oxygen Regulator 300 Bar Side Entry The G-Tech Single Stage Oxygen Regulator is designed for precise and reliable gas control in welding, cutting, and industrial applications. Built for durability and performance, this regulator features a side-entry design, making it ideal for setups where space and orientation are key factors. Key Features: Single-Stage Design – Ensures a steady and controlled oxygen flow for optimal performance. Dual Gauge Display – Provides clear readings of both cylinder pressure and outlet pressure for easy monitoring. 300 Bar Pressure Capacity – Suitable for high-pressure oxygen cylinders, delivering efficiency and reliability. Side Entry Connection – Designed for compatibility with various cylinder configurations. Robust & Durable Build – Manufactured with high-quality materials for long-lasting performance. Safety Compliant – Meets industry safety standards for secure and efficient gas regulation.   Ideal for professional welders, fabricators, and industrial users, the G-Tech Oxygen Regulator ensures precise pressure control and maximum safety, making it a trusted choice for all oxy-fuel applications.

G-Tech Gas Equipment Gtech Oxygen Regulator Single Stage 2 Gauge 300 Bar

Gtech Oxygen Regulator – Single Stage, 2 Gauge, 300 Bar The Gtech Oxygen Regulator is a high-quality, single-stage regulator designed for precise control of oxygen flow in welding, cutting, and industrial applications. Built for reliability and safety, it ensures consistent pressure delivery up to 300 Bar, making it ideal for both workshop and professional use. Featuring dual gauges for inlet and outlet pressure monitoring, this regulator allows accurate adjustment and control of oxygen flow. Its durable construction provides long-lasting performance and safe operation under demanding conditions, ensuring optimal efficiency for all oxy-fuel equipment. Key Features: Single-stage oxygen gas regulator Maximum pressure: 300 Bar Dual gauges for inlet and outlet pressure monitoring Durable construction for long-lasting use Ensures consistent and precise oxygen flow for welding and cutting Typical Applications: Oxy-Fuel Welding | Oxy-Acetylene Cutting | Industrial Fabrication | Workshop Use   Key Features • 50mm gauges conforming to ISO 5171 • Forged brass body & bonnet • Colour coded knobs for ease of use & clear identification of gas type • 300 bar capacity • Conform to ISO 2503 Brand: Gtech Type: Oxygen Regulator Model: Single Stage, 2 Gauge, 300 Bar

G-Tech Gas Equipment Gtech Argon Regulator Single Stage 2 Gauge With Nevoc Fitting

Single Stage 2 Gauge Argon Regulator with NEVOC Female threaded Connection For Energas 300Bar Bottles 

G-Tech Gas Equipment Gtech Argon/CO2 Regulator Single Stage 2 Gauge

Gtech Argon/CO₂ Regulator – Single Stage, 2 Gauge The Gtech Argon/CO₂ Regulator (Single Stage, 2 Gauge) is a high-quality gas control regulator designed for MIG, TIG, and general welding applications. Built for precision and reliability, this regulator ensures accurate gas flow and stable pressure, delivering clean, consistent shielding for superior weld quality. The two-gauge design provides clear, easy-to-read information: one gauge monitors cylinder pressure, while the second displays working/flow pressure, allowing precise adjustment for a variety of welding processes. Its single-stage construction ensures smooth and consistent output, even as cylinder pressure drops, making it ideal for professional and workshop use. Key Features: Single-stage regulator – delivers stable and consistent outlet pressure. Dual gauge design – monitors both cylinder pressure and outlet/flow pressure at a glance. Compatible with Argon, Argon/CO₂ mixes, and pure CO₂ – perfect for MIG/MAG and TIG welding. Precision brass body – durable, corrosion-resistant construction for long service life. Easy adjustment control – fine-tune gas flow for optimum weld quality and gas economy. Safety relief valve – protects against over-pressurisation.   Designed for reliability and ease of use, the Gtech Argon/CO₂ Regulator Single Stage 2 Gauge is the ideal choice for professional welders, fabrication shops, and maintenance teams requiring accurate gas control and consistent welding performance.

G-Tech Gas Equipment Gtech Acetylene Regulator Single Stage 2 Gauge

Single Stage 2 Gauge Acetylene Regulator 25 Bar Side Entry

G-Tech Gas Equipment G-tech Acetylene Regulator Single Stage 2 Gauge

Achieve precise gas control with the G-Tech Acetylene Regulator, designed for reliable performance in welding, cutting, and heating applications. This single-stage regulator ensures a steady and controlled gas flow, while the bottom entry design allows for easy connection in various setups. 25 Bar rated Key Features: Single-Stage Regulation – Provides consistent pressure control for smooth operation.Dual Gauge Display – Clearly indicates both cylinder pressure and working pressure for easy monitoring.Bottom Entry Design – Ideal for setups where space and hose routing require a bottom-mounted connection.High-Quality Construction – Built for durability and safety in demanding workshop environments.Compatible with Acetylene Gas – Suitable for a wide range of oxy-fuel welding and cutting applications.Safety Compliant – Meets industry standards for secure and efficient gas regulation. Whether you're a professional fabricator or a workshop operator, the G-Tech Acetylene Regulator delivers the precision and reliability you need for high-quality results.

Parweld PNME Gas Cutting Nozzle

PNM Cutting Nozzle   Parweld offers a wide range of gas cutting and welding equipment including regulators, torches and accessories for a variety of applications. Safety is always the focus, and all of our products are extensively tested and manufactured to the highest standards. • General Purpose Hand Cutting Propane Nozzle.• Longer than Standard PNM Nozzles to Give Improved Backfire Resistance and Accessibility.• Used with a Type 5 Cutting / Welding and Heating Torch.

Starparts Propane PNM Gas Cutting Nozzle

Starparts Propane PNM Gas Cutting Nozzle The Starparts Propane PNM Gas Cutting Nozzle is a precision-engineered consumable designed for reliable and efficient propane-based oxy-fuel cutting. Constructed from high-quality, heat-resistant materials, this nozzle ensures consistent flame performance, accurate cuts, and long service life, making it ideal for professional welders, fabricators, and maintenance technicians. Compatible with standard propane oxy-fuel cutting equipment, the PNM nozzle delivers clean, controlled cuts on mild steel and other ferrous metals. Its robust construction withstands high temperatures and frequent use, providing dependable performance in both workshop and industrial environments. Key Features: Precision-engineered Starparts cutting nozzle for propane Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard propane oxy-fuel cutting equipment Ideal for fabrication, maintenance, and industrial workshops Typical Applications: Propane Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Starparts Type: Propane Gas Cutting Nozzle Model: PNM

Parweld ANME Cutting Nozzle

ANME Cutting Nozzle Parweld offers a wide range of gas cutting and welding equipment including regulators, torches and accessories for a variety of applications. Safety is always the focus, and all of our products are extensively tested and manufactured to the highest standards. • General Purpose Hand Cutting Acetylene Nozzle • Promotes Improved Economy of Gases. • Used with a Type 5 18/90 Cutting / Welding and Heating Torch. Longer than standard ANM nozzles to give improved backfire resistance and accessibility 

Starparts Acetylene ANM Gas Cutting Nozzle

Starparts Gas Acetylene ANM Cutting Nozzle The Starparts Gas Acetylene ANM Cutting Nozzle is a durable, precision-engineered consumable designed for efficient and accurate oxy-acetylene cutting. Manufactured from high-quality materials, it ensures consistent flame performance and long service life, making it ideal for professional fabricators, welders, and maintenance technicians. Compatible with standard oxy-acetylene cutting equipment, this nozzle delivers clean, controlled cuts on mild steel and other ferrous metals. Its robust design withstands high temperatures and frequent use, providing reliable performance in industrial and workshop settings. Key Features: Precision-engineered Starparts cutting nozzle Compatible with acetylene gas and standard oxy-fuel cutting equipment Provides clean, controlled cutting performance Durable construction for long service life Suitable for industrial, workshop, and maintenance applications Material Thickness Gutting Guide Nozzle Selection:   1/32" 0.8mm 3–6mm 3/64" 1.2mm 5–12mm 1/16" 1.6mm 10–75mm 5/64" 2.0mm 70–100mm 3/32" 2.4mm 90–150mm 7/64" 2.8mm 140–200mm 1/8" 3.2mm 190–300mm Typical Applications: Oxy-Acetylene Cutting | Fabrication | Maintenance | Workshop Use | Metalworking   Brand: Starparts Type: Gas Acetylene Cutting Nozzle Model: ANM

Weldgas Single Stage 2 Gauge Argon/Co2 Bottom Entry Regulator

Weldgas Argon/Co2 single stage 2 gauge regulator 10Bar bottom entry  Comes with male thread fitting to go into the bottle standard for BOC, SGS, hobbyweld type Gas bottles etc  Used for MIG & TIG welding gas Spec: Description - Single stage 2 gauge argon/Co2 0-35L/min base entry Inlet Connection - BS341 No.3 (G5/8 BSP right hand) Outlet Connection - G3/8 BSP right hand Part No. 

Furick Mooseknuckle 14 Ceramic Cup Kit

Same great #14 as the glass version. This full ceramic model comes with and spare screen and this model threads on your 45V44 gas lens if you have a 9 or 20 torch. If you have a 17,18 or 26 torch you will need the adapter kit. This cup is recommended for DC only and 3/32 tungsten. It will give best results with 25-30 CFH of argon flow.

Furick Cup Mooseknuckle #14 Glass TIG Cup Kit

Furick Cup Mooseknuckle Pyrex 14 Kit The #14 cup (also known as the MooseKnuckle) carries an Issued US Patent on the Diffuser design and has an inside diameter of .750 inches/ 19mm. It is recommended for DC polarity applications only. It uses anywhere from 25-30 + CFH of Argon flow and is recommended for 3/32 / 2.4mm tungsten size. The cup has a 180amp rating on constant amperage. It can go higher if using pulse settings. Each kit comes complete with the pyrex cup, diffusers and o'rings for mounting straight onto a WP9/WP20 torch. They also fit WP17/18 and 26 torches but you will need to purchase the FURICK17 adapter kit for this to work.   Hand made in the USA of Borosilicate laboratory grade glass.   *** Due to the nature of the Glass “walking the Cup“ is not recommended. ***

CK Worldwide CK230 Rigid & Flexi Head- 300A Watercooled TIG Torch Package

CK230 Water Cooled 300amp ACHF or DCSP @ 100%, 20.9cm (8-1/4 in) 2 Series (WP9/20) Head Accessories Heavy Duty 300amp 100% duty cycle torch Uses Series 2 consumables (WP9/20) Larger water jacket design runs cooler Fully achieve 3.2mm tungsten electrode capability on thick aluminium joints Fitted with CK's Superflex Cable     Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable   3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

CK Worldwide CK20 (250A) 2 Series Watercooled TIG Torch With Superflex Cables

2 Series CK20 Water Cooled 250amp Rated TIG Torch Most popular water-cooled torch Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal   Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications   CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

BÖHLER Bohler Mild Steel SG2 Migwire A18 ER70S-6 G3Si1 - 15KG Plastic Reel

Experience top-quality welding with our Premium Bohler QG 3 SG2 copper-coated solid MIG welding wire, designed for gas metal arc welding (GMAW). This wire is a go-to choice for professionals working in boiler and vessel fabrication. It's also perfectly suited for structural and engineering projects involving unalloyed and low-alloyed carbon-manganese steels, making it a versatile addition to your welding toolkit. Key Specifications: Complies with EN ISO 14341-A G 42 3 M21 3Si1 / G 42 3C1 3Si1 and AWS A5.18: ER70S-6 standards. Compatible with an Argon/CO2 gas mix or pure CO2 as the shielding gas, offering flexibility in various welding scenarios.