Mild Steel MIG Wire ER70S-6 SG2 3GSi1 15KG

HARD CORE SG2 (G3Si1) – Premium Mild Steel MIG Welding Wire HARD CORE SG2 is a high-quality copper-coated solid wire designed for single pass or multi-pass MIG/MAG welding of unalloyed and low-alloyed carbon-manganese steels. It delivers excellent mechanical properties even in sub-zero environments, ensuring consistent performance across a wide range of structural and industrial applications. Key Features Versatile Performance: Suitable for single and multipass welds on a wide variety of carbon-manganese steels. Sub-Zero Toughness: Maintains mechanical properties down to -40°C, making it ideal for demanding environments. Precision Layer Wound: Engineered for smooth and stable wire feeding for superior weld quality. Industrial Applications: Commonly used in boiler fabrication, shipbuilding, automotive, bridges, rail, machinery, and structural steel projects. Reliable Raw Material Source: Produced using premium virgin raw materials for consistent quality and performance. Standards & Classifications EN/ISO Standard: ISO 14341-A AWS Standard: A5.18 EN/ISO Classification: G 42 3 C1 / G 42 4 M21 3Si1 AWS Classification: ER70S-6 Typical Applications Compatible with a wide range of base materials including: Steels: S185, S235, S275, S355 (Grades A, B, D), AH32 to DH36, L210–L360, P235T1–P275T2, etc. Pipes & Tubes: L210, L240, L290, L360, L415MB, X42, X46, X52, X60, etc. Plates & Structures: P235NH, P265GH, S275J2W, S355NL, S420ML, and more (List includes illustrative, not exhaustive, grades) Welding Parameters Wire DiameterVoltage (V)Current (A) 0.8 mm 18–22 V 60–180 A 1.0 mm 18–32 V 80–300 A 1.2 mm 18–34 V 120–380 A Polarity: DC (+) Shielding Gases: EN ISO 14175 – C1, M21 Welding Positions: PA, PB, PC, PD, PE, PF, PG (all positional) Mechanical Properties (Typical) With C1 Gas: Tensile Strength: 540 N/mm² Yield Strength: 440 N/mm² Elongation: 30% Impact Strength: 70 J @ -30°C With M21 Gas: Tensile Strength: 580 N/mm² Yield Strength: 460 N/mm² Elongation: 26% Impact Strength: 90 J @ -40°C Typical Chemical Composition (%)   CSiMnPSCuCrNiMoAlVZr+Ti 0.08 0.95 1.45 ≤0.025 ≤0.025 ≤0.35 ≤0.15 ≤0.15 ≤0.15 ≤0.020 ≤0.030 ≤0.15

Abicor Binzel Xfume Advanced Extractor 230V Package

Abicor Binzel xFume® Advanced Extraction Package – 230V Part Number: 601.0192.1 Product Overview: The Abicor Binzel xFume Advanced is a high-efficiency fume extraction system designed specifically for welding applications. This 230V unit is ideal for workshops, fabrication shops, and industrial environments where welding fume management is a priority. It integrates seamlessly with fume extraction MIG torches and other compatible systems to ensure the health and safety of welding operators. Key Features: High-Performance Extraction: The xFume Advanced uses a powerful turbine motor to deliver high airflow and static pressure, ensuring effective extraction directly at the source. Suitable for capturing welding fumes from manual welding processes, especially MIG/MAG and TIG. 3-Stage Filtration System: Includes a pre-filter, main filter, and activated carbon filter, offering up to 99.95% efficiency on particles down to 0.3 microns. HEPA-grade filtration ensures compliance with occupational safety regulations (such as W3 classification for stainless steel welding). Automatic Start/Stop: Optional signal integration with welding torches allows the unit to activate automatically when welding begins, conserving energy and prolonging filter life. Compact & Mobile: Rugged housing with castor wheels for mobility. Compact footprint ideal for use in tight workshop environments. Low Operating Noise: Operates quietly compared to comparable high-capacity systems, improving operator comfort. Technical Specifications: SpecificationValue Input Voltage 230V / 1-phase / 50–60 Hz Power Consumption Approx. 1.1 – 1.5 kW Max Airflow ~260 m³/h (varies by setup) Max Vacuum ~20,000 Pa Filtration Efficiency ≥ 99.95% (HEPA class H13) Noise Level ~70 dB(A) Filter Cleaning Manual or semi-automatic Dimensions (LxWxH) Approx. 600 x 400 x 900 mm Weight Approx. 35–40 kg Applications: Light to medium-duty welding fume extraction Stainless steel, aluminum, and mild steel MIG/MAG welding Ideal for workshops seeking a portable yet powerful extraction solution Designed for use with fume extraction MIG torches such as the xFume® MIG or FES-200 torch systems Included in the Package: xFume Advanced Extraction Unit – 230V (Part No. 601.0192.1) 2 x Pre-installed filter cartridges Automatic start-stop lead 1.5mtr Power cable and mobility kit (wheels and handle) User manual and setup instructions dust collection bags    

Mild Steel MIG Wire ER70S-6 SG2 3GSi1 Pallet Of 72 15KG Boxes

HARD CORE SG2 (G3Si1) – Premium Mild Steel MIG Welding Wire HARD CORE SG2 is a high-quality copper-coated solid wire designed for single pass or multi-pass MIG/MAG welding of unalloyed and low-alloyed carbon-manganese steels. It delivers excellent mechanical properties even in sub-zero environments, ensuring consistent performance across a wide range of structural and industrial applications. Key Features Versatile Performance: Suitable for single and multipass welds on a wide variety of carbon-manganese steels. Sub-Zero Toughness: Maintains mechanical properties down to -40°C, making it ideal for demanding environments. Precision Layer Wound: Engineered for smooth and stable wire feeding for superior weld quality. Industrial Applications: Commonly used in boiler fabrication, shipbuilding, automotive, bridges, rail, machinery, and structural steel projects. Reliable Raw Material Source: Produced using premium virgin raw materials for consistent quality and performance. Standards & Classifications EN/ISO Standard: ISO 14341-A AWS Standard: A5.18 EN/ISO Classification: G 42 3 C1 / G 42 4 M21 3Si1 AWS Classification: ER70S-6 Typical Applications Compatible with a wide range of base materials including: Steels: S185, S235, S275, S355 (Grades A, B, D), AH32 to DH36, L210–L360, P235T1–P275T2, etc. Pipes & Tubes: L210, L240, L290, L360, L415MB, X42, X46, X52, X60, etc. Plates & Structures: P235NH, P265GH, S275J2W, S355NL, S420ML, and more (List includes illustrative, not exhaustive, grades) Welding Parameters Wire DiameterVoltage (V)Current (A) 0.8 mm 18–22 V 60–180 A 1.0 mm 18–32 V 80–300 A 1.2 mm 18–34 V 120–380 A Polarity: DC (+) Shielding Gases: EN ISO 14175 – C1, M21 Welding Positions: PA, PB, PC, PD, PE, PF, PG (all positional) Mechanical Properties (Typical) With C1 Gas: Tensile Strength: 540 N/mm² Yield Strength: 440 N/mm² Elongation: 30% Impact Strength: 70 J @ -30°C With M21 Gas: Tensile Strength: 580 N/mm² Yield Strength: 460 N/mm² Elongation: 26% Impact Strength: 90 J @ -40°C Typical Chemical Composition (%)   CSiMnPSCuCrNiMoAlVZr+Ti 0.08 0.95 1.45 ≤0.025 ≤0.025 ≤0.35 ≤0.15 ≤0.15 ≤0.15 ≤0.020 ≤0.030 ≤0.15

ESAB Rogue ES 181iP MMA Stick Welder Package 240V

ESAB Rogue ES 181iP – High-Performance & Portable MMA Welder The ESAB Rogue ES 181i is an advanced MMA welder designed to deliver precise, professional, and consistent arc performance. Equipped with next-level technology, it provides smooth, stable arcs with minimal spatter, ensuring superior weld quality across all electrode types and welding positions. Its adjustable hot start guarantees easy arc ignition, even with difficult electrodes, while the adjustable arc force enhances penetration and prevents sticking. Built for durability, the Rogue ES 181i features a rugged fiberglass-moulded housing that withstands repeated impact, making it an ideal choice for both workshop and field applications. With an IP23S rating, it is weather-resistant and suited for demanding outdoor environments. Plus, ESAB’s three-year industry-leading warranty ensures long-term reliability and peace of mind. Key Features Stable Arc Performance – Ensures smooth welding with low spatter, even on tough electrodes. Adjustable Hot Start – Simplifies arc ignition for an effortless welding experience. Arc Force Control – Improves penetration and prevents electrode sticking. Rugged & Durable Build – Fiberglass-moulded housing withstands heavy-duty use. Weather-Resistant (IP23S Rated) – Designed for both indoor and outdoor use. Lightweight & Portable – Weighs just 6.8 kg, with a sturdy handle and included shoulder strap for easy transport. Supports Long Extension Cables – Delivers stable arc performance, even in remote locations. Three-Year Warranty – Backed by ESAB’s commitment to quality and durability. The ESAB Rogue ES 181i is the perfect choice for welders who need portability, reliability, and outstanding performance in an entry-level MMA welder. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Renegade ES 210i MMA Stick Welder Package

Renegade ES 210i – High-Performance MMA & TIG Welding Machine The Renegade ES 210i is a robust and portable single-phase MMA and Live TIG welding machine, designed for demanding industrial environments. Featuring a durable IP23-rated housing, this unit is built to withstand tough job site conditions. The included high-quality carrying strap with multiple lift points ensures easy transport when mobility is essential. With an integrated active Power Factor Correction (PFC) circuit, the Renegade ES 210i maintains stable performance even when used with long extension cables—up to 100 meters. This machine delivers outstanding weld quality across various electrode types, including 6010 cellulosic rods. Operators can quickly access welding parameters and memory functions for a more efficient and user-friendly experience. Key Features Rugged & Durable – IP23-rated housing for reliable indoor and outdoor operation Professional MMA Performance – Handles electrodes up to 4mm with high output power Power Factor Correction (PFC) – Ensures a steady arc, even with long mains cables (up to 100m) Optimised Arc Control – Adjustable Hot Start and Arc Force for superior welding performance Enhanced Cellulosic Welding – Built-in voltage booster for better arc stability on 6010 rods User-Friendly Interface – Easy-to-read control panel for precise settings and reduced downtime Memory Function – Three programmable settings for quick parameter recall Complete Package – Includes a 3m work lead, 3m electrode holder, and a comfortable shoulder strap Ideal for Industries Shipbuilding & Offshore Civil & Structural Construction Pipe Welding & Fabrication Maintenance & Repair Work Heavy Industry & General Fabrication Mining & Steel Erection The Renegade ES 210i combines durability, portability, and top-tier welding performance, making it a reliable choice for professional welders. Please note: This item is a special order item that needs to be ordered from the manufacturer.

Milwaukee Fixtec M14 Quick Locking Angle Grinder Flange Nut

The Milwaukee 4932352473 Fixtec Quick Locking Flange Nut is designed to provide fast, tool-free disc changes for angle grinders, improving efficiency and convenience on the job. Ideal for professionals and DIY users, this innovative self-locking flange nut eliminates the need for a spanner wrench, allowing for quick and easy accessory swaps with minimal downtime. Key Features: Tool-Free Operation – Enables quick and easy disc changes without the need for additional tools, reducing downtime and increasing productivity. Universal Compatibility – Designed to fit most M14 spindle angle grinders, making it a versatile addition to your tool kit. Secure Locking Mechanism – Ensures a tight and reliable grip on cutting and grinding discs, preventing slippage during operation. Durable Construction – Made from high-quality steel for long-lasting performance and resistance to wear. Compact & Lightweight Design – Does not add unnecessary bulk to your grinder, maintaining balance and maneuverability. Ideal For: Professional tradespeople Construction and metalworking applications DIY users looking for a hassle-free disc change solution Cutting, grinding, and polishing tasks Why Choose Milwaukee? Milwaukee is known for its high-performance, innovative tool solutions, and the Fixtec Quick Locking Flange Nut is no exception. By allowing rapid, tool-free disc changes, this accessory enhances efficiency, safety, and convenience, making it an essential addition to any grinder setup.

Lessman Stainless Steel 125MM x 22.2MM Pipeline Twist Knot Wire Brush

Lessman Stainless Steel Pipeline Twist Knot Wire Brush – 125mm x 22.2mm The Lessman Stainless Steel Pipeline Twist Knot Wire Brush is a high-performance industrial brush designed for aggressive cleaning, deburring, and surface preparation of pipes, tubes, and other cylindrical surfaces. Its twist knot construction provides maximum stiffness and durability, making it ideal for heavy-duty metalworking and pipeline maintenance. Measuring 125mm in diameter with a 22.2mm bore, this brush fits most standard bench grinders and hand-held rotary tools. The stainless steel bristles resist corrosion and wear, delivering long-lasting performance even in demanding workshop or fabrication environments. Engineered for efficiency and safety, the Lessman twist knot wire brush is perfect for removing rust, scale, paint, and weld spatter, while maintaining the integrity of the workpiece. Key Features: 125mm diameter x 22.2mm bore – suitable for standard grinders and rotary tools Twist knot wire design – aggressive and durable for heavy-duty cleaning Stainless steel bristles – corrosion-resistant and long-lasting Ideal for pipe and tube cleaning – deburring, weld cleaning, and surface preparation High-quality construction – maintains performance in industrial and workshop environments Applications: Cleaning and deburring pipelines and tubular components Removal of rust, scale, paint, and welding residues Surface preparation before coating or welding Industrial, fabrication, and maintenance workshops This Lessmann Pipeline Brush has the following specification: Wire: Stainless SteelNumber of Knots: 40Diameter: 125mmWidth: 6mmBore: 22.2mmMax. Speed: 15,000/bpm

Pferd Polifan Strong CO-Freeze SGP 50Grit Stainless Ceramic Flap Disc 125mm (5")

Polifan® Strong CO-Freeze SGP Flap Disc – 125mm x 22.23mm – 50 Grit (Ceramic for Stainless Steel) Size: 125 mm (5") x 22.23 mm Grit: 50 Material: Ceramic oxide with CO-Freeze active grinding aid Application: Stainless steel, Inox, nickel alloys, high-temperature-resistant steels Product Overview The Polifan® Strong SGP CO-Freeze from PFERD is a premium-grade ceramic flap disc built for demanding stainless steel and exotic alloy grinding tasks. With a cool grinding aid (CO-Freeze) and aggressive ceramic grain, it delivers fast stock removal, extended service life, and significantly reduced heat build-up, making it ideal for stainless steel and heat-sensitive materials. Key Features Aggressive 50 Grit Ceramic Grain Optimized for fast material removal with a consistent, aggressive cut. CO-Freeze Grinding Aid A special coolant additive integrated into the flap design reduces heat buildup, preventing discoloration or warping on stainless steel and alloy workpieces. High Stock Removal Rate Especially effective for surface leveling, weld seam dressing, and edge work on stainless and exotic metals. Long Service Life Durable polycotton backing combined with top-tier ceramic abrasive provides extended usage per disc. Minimal Discolouration and Burr Formation The cool grinding effect preserves the finish and reduces post-processing. Consistent Performance Maintains cutting power throughout its lifespan due to uniform flap wear and ceramic self-sharpening effect. Technical Specifications PropertyValue Diameter 125 mm (5") Bore 22.23 mm Grit Size 50 (Medium Coarse) Abrasive Ceramic with CO-Freeze additive Max RPM ~12,200 Shape Flat (T27) or Conical (T29) Tool Compatibility Angle grinders Application Range Stainless steel, Inox, titanium, duplex, and nickel alloys Applications Weld seam removal and blending Surface grinding and leveling on stainless steel Edge deburring and prep work for TIG/MIG weld zones Grinding of nickel-based and heat-resistant alloys Use in fabrication, shipbuilding, food-grade stainless finishing, and pharma-grade fabrication Benefits High removal rates with minimal pressure Low heat generation – reduces risk of tempering colors Longer life than conventional flap discs Reduced disc changes during extended tasks Excellent for stainless steel surface protection and high finish requirements Compliance & Safety   Produced by PFERD to meet strict EN 13743 safety standards Marked for Inox compatibility Always wear appropriate PPE when grinding

Faithfull Faithful Engineer's Square Straight Edge

Faithfull Engineer's Square Straight Edge The Faithfull Engineer's Square Straight Edge is a precision measuring and marking tool designed to deliver accurate 90° angles for engineering, fabrication, woodworking, and general workshop applications. Manufactured from high-quality hardened steel, this engineer's square is built for durability and long-lasting accuracy, making it an essential tool for professionals and DIY users alike. The precision-machined blade and stock ensure reliable squareness when checking, marking, and setting out workpieces. Ideal for use in metalworking, welding, machining, joinery, and construction, the Faithfull Engineer's Square helps achieve accurate layouts and quality workmanship every time. Its robust construction resists wear and deformation, providing dependable performance in demanding workshop environments. Key Features Precision-machined for accurate 90° angle checking. High-quality hardened steel construction. Ideal for measuring, marking out, and inspection. Durable design for long service life. Suitable for metalworking, woodworking, and engineering applications. Accurate straight edge for layout and alignment tasks. Easy-to-read, professional workshop tool. Applications Metal fabrication Welding and engineering Machining Woodworking and joinery Construction Workshop inspection Marking out and layout work Quality control Specifications Brand: Faithfull Product Type: Engineer's Square Straight Edge Material: Hardened Steel Angle: Precision 90° Application: Measuring, marking, checking and inspection Finish: Ground and machined for accuracy   The Faithfull Engineer's Square Straight Edge is an indispensable tool for ensuring precise right angles and straight lines, helping fabricators, engineers, and tradespeople achieve accurate, professional results across a wide range of measuring and marking tasks

Norton Abrasives Norton ALU Cut Thin Cutting (Slitting) Disc For Aluminum 4.5"(115mm) & 5"(125mm)

Product Overview The Norton ALU Cut Thin Cutting (Slitting) Disc for Aluminium is a high-performance abrasive disc designed specifically for cutting aluminium and other non-ferrous metals. Manufactured using an advanced abrasive grain and bonding system, these discs provide fast, smooth cutting while preventing clogging or loading during operation. The ultra-thin design allows for precise cuts with minimal resistance, making it ideal for fabrication, maintenance, and general metalworking applications. Available in 4.5" (115 mm) and 5" (125 mm) sizes, the discs are suitable for use with standard angle grinders commonly used in workshop and industrial environments.  

EWM Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel

Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. Why we love the EWM Phoenix XQ350 Puls CW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead. Ideal for perfect MIG/MAG weld seams even with long welding leads. Seamless synergic control with one-knob operation. No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works. Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium. Fully manual operation for Non Synergic operation where requiried. Suitable for MIG/MAG, MMA welding, TIG welding and gouging. Individually configurable programmes for each welding task (JOB). Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires. Start and end-crater function fully adjustable. Infinitely adjustable arc dynamics (choke effect). Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts. LED information bar: Indicates the current operating status. High efficiency and standby function. Connection capability for remote control and function torch. Easy, tool-free change of welding polarity. Earth fault monitoring (PE protection). IP23 spray water protected. Network connectivity with the ewm Xnet software via an integrated or external gateway is optional. PC interface for PC300 XQ software. The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables. Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355. The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V

Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. This machine is not capable of Expert 2.0 technology, it does not have controls on the machine but it is controlled exclusively through the wire feeder selected.  Why we love the EWM Phoenix XQ600 Puls DW: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where requiried Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ400 Puls Expert Panel Seperate Digital Water-Cooled MIG Welder 415V

Titan XQ400 Puls Seperate Digital Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. Why we love the EWM Titan XQ400 Puls DW EX MIG/MAG inverter welding machine includes Expert XQ 2.0 Control, pulse and separate wire feeder. Equipment Provided: Welding machine with Expert XQ 2.0 Control, including wheel kit with single cylinder bracket, water cooling and 5m mains connection lead Perfect MIG/MAG weld seams even with long welding leads Synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld Has Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Manual setting of welding parameters is available using Non-Synergic operation. Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Start and end-crater functions adjustable Forever adjustable arc dynamics (choke effect) Accessories and optional extras fit with flexFit casing system: Using conventional slot nuts LED information bar: Indicates the current operating status Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires High efficiency and standby function available Connection capability for remote control and function torch No tools needed for change of welding polarity Monitoring of Earth fault available (PE protection) IP23 spray water protected Optional network connectivity with the ewm Xnet software via an integrated or external gateway PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Titan XQ 400 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ 350 Pulse Seperate Watercooled MIG Welder With Expert Panel

EWM Titan XQ 350 Puls DW EX MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. The welding machine has intuitive XQ Expert control which allows user to set all parameters easily, switch between processes and procedures such as ForceArc/ForceArc Puls to RootArc/RootArc Puls or Standard/pulse. This Expert machine with OLED screen also features; arc length correction, adjustment of arc dynamics (the choke effect), standby function, kilowatt display and effective arc power for calculating the energy per unit length. Why we love the EWM Titan XQ350 Puls DW EX Perfect for creating MIG/MAG seams, even with long welding leads. Innovative EWM Synergic characteristics- Rootarc XQ/Rootarc PulsXQ, Cold arcXQ/Coldarc PulsXQ, Forcearc/Forcearc PulsXQ, Wiredarc XQ/WiredarcPuls XQ, Puls/Superpuls and Positionweld. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/Aluminium. Non-synergic operation for manual setting of weld parameters. Also suitable for MMA welding, TIG welding and gouging Adjustable start and end-crater functions Infinitely adjustable arc dynamics (choke effect) flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nutse Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumablesg Adjustable hot start current and hot start time Optional network connectivity with the ewm Xnet software via an integrated or external gateway IP23 spray water protected Connection capability for remote control and function torch Energy-saving thanks to high efficiency and standby function Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires Equipment as supplied: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, 1.8Mtr Interconnecting Cables, water cooling and 5m mains connection lead The price shown includes the following components:   Titan XQ 350 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

Weiler Abrasives Metalynx Pro 9"(230mm) Flap Disc 40 Grit

Weiler Abrasives Metalynx Pro 9" (230mm) Flap Disc – 40 Grit Aggressive Stock Removal Meets Long Life Performance for Heavy-Duty Metalworking The Weiler Metalynx Pro 9" (230mm) 40 Grit Flap Disc is built to handle tough grinding and blending applications with efficiency and consistency. Engineered for professional fabricators and metalworkers, this high-performance disc combines aggressive material removal with a longer operational life—reducing downtime and increasing productivity. This 40-grit disc features a high-quality zirconia alumina abrasive that self-sharpens under pressure, delivering a powerful cutting action on carbon steel, stainless steel, and alloyed metals. It's ideal for heavy stock removal, weld bead grinding, edge chamfering, and surface blending, jobs also handled by traditional metal grinding discs, though the flap format leaves a smoother finish in one pass. The larger 9-inch diameter provides a broader contact area, making it suitable for high-output applications and large surface coverage. The Type 29 conical shape and angled flaps offer maximum surface contact, optimal blending, and a smooth grinding feel, while the robust fiberglass backing adds strength and stability during demanding operations. Designed for use with 230mm angle grinders, the Metalynx Pro flap disc helps professionals maintain a consistent finish with fewer disc changes. Key Features: Abrasive Type: Premium zirconia alumina for fast, cool cutting and long life Grit Size: 40 – ideal for aggressive stock removal and rough surface prep Disc Size: 9" (230mm) diameter for large-scale grinding and blending Type 29 Conical Design: Angled flaps increase contact area and operator control Backing Material: High-strength fiberglass for safety and durability Max RPM: Typically rated to 6,600 RPM (confirm grinder specifications) Surface Compatibility: Suitable for carbon steel, stainless steel (INOX), and alloyed metals Application: Grinding, deburring, weld removal, edge prep, and surface blending Advantages: Longer lifespan compared to standard flap discs Maintains sharpness throughout its service life Reduced need for disc changes on large jobs Cooler cutting action helps protect heat-sensitive materials Typical Industries: Metal fabrication Structural steelwork Shipbuilding Heavy equipment manufacturing Maintenance and repair operations (MRO) When performance, longevity, and precision matter, the Weiler Metalynx Pro 9" 40 Grit Flap Disc delivers—making it an essential tool for serious metalworking professionals.

Pegatec Golden Professional Line 3MM Thick Steel Cutting Discs 4"(100mm) - 9"(230mm)

Pegatec Golden Professional Line – 3mm Thick Steel Cutting Discs Sizes: 4" (100mm), 4.5" (115mm), 5" (125mm), 7" (180mm), 9" (230mm) Thickness: 3.0 mm Application: Steel, mild steel, carbon steel, structural metals Type: Depressed centre (Type 41/42 depending on size) Product Overview The Pegatec Golden Line cutting discs are part of Pegatec's Professional Series, designed for aggressive, long-lasting cutting performance in general metalworking and fabrication environments. With a robust 3 mm thickness, these wheels are built for durability, longer life, and stability during straight cutting of thicker sections and profiles. Key Features Heavy-Duty 3 mm Thickness Built to handle tough cutting jobs with increased wheel life and stability. Reinforced Resin Bonded Construction Premium aluminium oxide grain with dual mesh reinforcement for enhanced safety and longer usage time. Golden Line Professional Grade Pegatec’s advanced formulation offers a balance of speed and longevity, making these discs suitable for both professionals and serious fabricators. Optimised for Carbon & Mild Steel Fast stock removal and smooth, burn-free cuts across general steels, structural profiles, rebar, angle iron, and more. Available in Multiple Sizes Covers all angle grinder sizes from 4" to 9", making it ideal for portable grinding setups or workshop use. Technical Specifications SizeDiameter (mm)Thickness (mm)Bore (mm)Max Speed (RPM) 4" 100 3.0 16 15,300 4.5" 115 3.0 22.23 13,300 5" 125 3.0 22.23 12,200 7" 180 3.0 22.23 8,600 9" 230 3.0 22.23 6,600 Applications Steel fabrication shops Construction and structural steel cutting Industrial maintenance and repair General-purpose cutting tasks in heavy-duty environments Benefits Long life even in harsh cutting conditions Reduced vibration and better control due to 3 mm thickness High cutting accuracy with minimal burring Reliable performance on all standard angle grinders Safety and Compliance Compliant with EN 12413 safety standards Manufactured under ISO 9001 quality control Reinforced to resist breakage under high RPM use Product advantages Application Materials Extra durability High-speed cutting High-break-resistance Comfortable cutting experience Economic Material of Thin-walled tube Various section bars Material of Solid Pipe Various Plates Stainless Steel Acid-resistant steel Tool steel High-tensile structural steel Mild steel

CK Worldwide CK Standard Split Collet 3 Series Fits WP17, 18 & 26

CK Standard Split Collet 3 Series – Fits WP17, WP18 & WP26 The CK Standard Split Collet 3 Series is engineered for precision, durability, and optimal performance in TIG welding applications. Manufactured by CK Worldwide, these high-quality collets are designed to provide a secure grip on the tungsten electrode, ensuring stable arc performance and excellent current transfer. Compatible with WP17, WP18, and WP26 torch series, the split design allows for easy installation and consistent clamping pressure, reducing heat build-up and extending both collet and torch life. Ideal for professional TIG welders demanding reliability and consistency across a wide range of materials and applications. Key Features: Genuine CK Worldwide replacement part Standard split design for consistent electrode grip and easy fitment Provides excellent current transfer and arc stability Precision-machined copper alloy for superior conductivity and durability Compatible with WP17, WP18, and WP26 TIG torches Available in all common tungsten diameters Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys   Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches   Available in the following sizes: 0.5MM 1.0MM 1.6MM 2.4MM 3.2MM 4.0MM Sold Singularly - If Packs Are Required Please Order In Quantities Of 5

Starparts WP9 / WP20 Standard TIG Torch Collet Body

WP9 / WP20 TIG Collet Bodies – Precision Fit, Consistent Gas Coverage Engineered for reliability and performance, WP9 / WP20 TIG Collet Bodies are a vital component for your TIG torch setup, ensuring precise tungsten alignment and optimal shielding gas flow. These collet bodies are designed to fit standard WP9 and WP20 series TIG torches, and are fully compatible with industry-standard consumables. Key Features Precision Machined Brass Construction Manufactured from high-quality brass to ensure corrosion resistance, durability, and excellent electrical conductivity for consistent arc performance. Accurate Tungsten Clamping Provides secure and centered tungsten alignment for a stable arc, reduced contamination, and improved weld quality. Optimized Gas Flow The design allows for uniform shielding gas distribution, protecting the weld pool from atmospheric contamination and improving arc stability. Versatile and Interchangeable Compatible with a wide range of TIG torch setups using WP9 or WP20 series torches – ideal for both air-cooled and water-cooled applications. Available in Multiple Sizes Designed to suit the most common tungsten diameters: 1.0mm (0.040”) 1.6mm (1/16”) 2.4mm (3/32”) 3.2mm (1/8”) Easy Installation and Removal Smooth threading and standardized sizing ensure quick changeover and minimal downtime during consumable replacement. Applications Stainless steel TIG welding Mild steel and carbon steel TIG welding Aluminium (with appropriate collet and tungsten) Precision welding tasks in fabrication, aerospace, automotive, and maintenance industries Suitable for both DC and AC TIG welding processes  

Starparts Propane PNM Gas Cutting Nozzle

Starparts Propane PNM Gas Cutting Nozzle The Starparts Propane PNM Gas Cutting Nozzle is a precision-engineered consumable designed for reliable and efficient propane-based oxy-fuel cutting. Constructed from high-quality, heat-resistant materials, this nozzle ensures consistent flame performance, accurate cuts, and long service life, making it ideal for professional welders, fabricators, and maintenance technicians. Compatible with standard propane oxy-fuel cutting equipment, the PNM nozzle delivers clean, controlled cuts on mild steel and other ferrous metals. Its robust construction withstands high temperatures and frequent use, providing dependable performance in both workshop and industrial environments. Key Features: Precision-engineered Starparts cutting nozzle for propane Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard propane oxy-fuel cutting equipment Ideal for fabrication, maintenance, and industrial workshops Typical Applications: Propane Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Starparts Type: Propane Gas Cutting Nozzle Model: PNM

Assorted Box Of Standard & Large Flange Rivets & Washers 350PCS

Assorted Box of Standard & Large Flange Rivets & Washers – 350pcs This assorted set of flange rivets and washers offers a versatile collection of 350 high-quality components suitable for a wide range of mechanical, automotive, and DIY fastening applications. The set includes both standard and large flange rivets, paired with compatible washers to provide secure, stable, and vibration-resistant connections. Manufactured from durable steel and finished for corrosion resistance, these rivets and washers are designed for long-lasting performance in demanding environments. Supplied in a practical, compartmentalized storage case, the assortment keeps all pieces organized and easy to identify, making it ideal for workshops, garages, and on-site projects. Key Features: 350-piece assortment – includes standard and large flange rivets with matching washers Durable steel construction – ensures long-lasting strength and reliability Corrosion-resistant finish – suitable for industrial, automotive, and general applications Versatile design – flange rivets and washers provide secure, vibration-resistant fastening Organized storage box – compartments keep components sorted and easy to access Applications:   Automotive repair and assembly Sheet metal and fabrication work Workshop, garage, and DIY projects General-purpose fastening and maintenance tasks Zinc Plated Washers Set Includes: Standard Flange Rivets: 1/8" x 5/16", 3/8". 5/32" x 1/2". 3/16" x 1/2", 3/4". Large Flange Rivets: 3/16" x 1/2", 5/8", 1". Rivet Washers: 1/8"

Assorted Box Of Serrated Flange Nuts Metric 225 PCS

Assorted Box of Serrated Flange Nuts – Metric (225pcs, M5–M12) This assorted set of serrated flange nuts provides a versatile selection of high-quality metric nuts designed for secure fastening in a wide range of mechanical, automotive, and maintenance applications. Each nut features an integrated serrated flange, which grips the surface to resist loosening due to vibration, eliminating the need for separate washers. Made from durable, corrosion-resistant steel, these nuts are built to provide long-lasting strength and reliability. The 225-piece set includes a variety of popular sizes from M5 to M12, neatly organized in a compartmentalized storage box for easy selection and storage. Perfect for workshops, garages, and DIY toolkits. Key Features: 225-piece metric assortment – includes M5, M6, M8, M10, and M12 Serrated flange design – provides secure locking and resists vibration Durable steel construction – long-lasting and reliable Corrosion-resistant finish – suitable for automotive, industrial, and general use Organized storage box – compartments keep nuts sorted and easily accessible Applications: Automotive repair and maintenance Machinery assembly and fabrication Construction and engineering projects General fastening and workshop use

BÖHLER Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE

Pegatec Professional Line Metal Cutting Disc 12"(300mm)

Pegatec Professional Line 12" (300 mm) Metal Cutting Disc Part of the Pegatec Professional Series Size: 12" (300 mm) x 3.0 mm x 25.4 mm Application: Mild steel, carbon steel, structural metals, and general ferrous materials Tool Compatibility: Chop saws, stationary cutting machines Product Overview The Pegatec Professional Line 12" Cutting Disc is a high-performance abrasive wheel designed for fast, clean, and reliable cutting of metal materials using chop saws or stationary cut-off machines. Engineered with premium grain and a reinforced bond structure, this disc ensures high cutting efficiency with minimal wheel wear and user fatigue. Key Features Heavy-Duty Construction A 3 mm thick profile provides excellent durability and stability, particularly during prolonged or deep cuts. Premium Aluminium Oxide Grain Fast-cutting and wear-resistant, ideal for tough metal cutting applications including solid bar, pipe, angle, and channel. Reinforced Safety Mesh Dual fiberglass mesh layers enhance wheel strength and reduce the risk of breakage during high-speed operation. Optimised for Stationary Machines Perfect for use with chop saws and bench-mounted cutting tools operating at standard RPMs for 300 mm discs. Smooth & Accurate Cutting Performance Designed for minimal vibration, clean cut edges, and reduced heat generation during operation. Technical Specifications PropertyValue Diameter 300 mm (12") Thickness 3.0 mm Bore Size 25.4 mm Max Speed 5,100 RPM Operating Speed Up to 80 m/s Abrasive Type Aluminium Oxide Bond Type Resin-bonded, reinforced Applications Cutting of solid steel sections and pipe Fabrication and metalworking shops Construction sites Engineering workshops Maintenance and repair operations Benefits Long service life under heavy workloads Consistent cutting performance throughout the disc’s lifespan Cost-effective for volume cutting applications Suitable for ferrous metals including carbon steel and rebar Safety & Compliance Manufactured under ISO 9001 quality systems Fully compliant with EN 12413 standards Fiberglass-reinforced for added user safety Always use appropriate PPE and ensure machine compatibility