Bohler Thermanit 308L TIG Filler Wire 5KG Pack

Bohler Thermanit E308L TIG Filler Wire 5KG Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion-resistant similar to matching low-carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. High toughness at subzero temperatures as low as –196 °C (–321 °F). For joning and surfacing applications with matching and similar – stabilized and non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels/cast steel grades. For joining and surfacing work on cryogenic matching / similar austenitic CrNi(N) steels / cast steel grades.ClassificationsAWS A5.9: ER308LEN ISO 14343-B: SS308LEN ISO 14343-A: W 19 9 L

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE

Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG

Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG Exaton 25.10.4.L is designed for gas shielded arc welding of superduplex stainless steels, such as UNS S32750 (e.g. SAF™ 2507), UNS S32760 and UNS S31803 / S32205 (e.g. SAF™ 2205). It combines high strength with excellent ductility. Exaton 25.10.4.L can also be used for joining UNS S32750 and S32760 to carbon steel or low-alloy steels. Exaton 25.10.4.L can also be used for welding duplex stainless steels when the highest possible corrosion resistance is required. The grade is characterized by excellent resistance to stress corrosion cracking in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. Its corrosion resistance is equal to UNS S31254 (e.g. Alleima® 254SMO™) in most applications.

Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weldstar ER307Si Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weldstar ER308L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Offers good corrosion resistance in nitric acid environments. Good mechanical properties at sub-zero temperatures down to -197ºC. Typically used on applications where a good atmospheric corrosion resistance in urban and rural medias is expected, pipes/tubes, boiler engineering, food processing and chemical industries etc.

Weldstar ER309L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Good performance under carburising atmospheres. High temperature oxidation and corrosion resistance. ER 309L can be used to weld dissimilar steels and buffer layers. Ideal for joining and overlay of stainless steels of similar composition, such as AISI 309 castings, and for joining of 3Cr12. Typically used on applications in industrial furnaces and boiler parts, annealing chambers, heat exchangers, fused salt treatment installations etc.    Typical Base Materials All 300 series austenitic stainless steel, 3Cr12, mild steels (cladding)* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 23 12 L AWS A5.9 - ER 309L

Weldstar ER310 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire most often used to weld base metals of similar composition. Excellent resistance to oxidation, especially at high working temperatures (lower than 1000°C) due to its high Cr content. Fully austenitic and therefore sensitive to hot cracking. Ideal for welding and overlay of stainless steels of similar chemical composition including dissimilar welding. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc.    Typical Base Materials 300 series austenitic stainless steel for welding (e.g. AISI 310, 304); mild and carbon steels for overlay works* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 20 AWS A5.9 - ER 310

Weldstar ER312 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire originally designed to weld cast alloys of similar composition. It gives a two-phase weld deposit with substantial percentages of ferrite in austenite matrix. Ideal for welding dissimilar metals such as carbon steel to stainless steel, particularly those grades high in nickel. Due to its high ferrite level, ER 312 is very adapted to heterogeneous welding, especially when one of the components is fully austenitic. Good corrosion oxidation resistance at high temperature due to its high content of Cr. Service temperatures should be below 420°C to prevent formation of secondary brittle phases. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc.    Typical Base Materials Mild and low alloy steels, stainless steel of similar composition, Buffer layers, armor plate, 409, 304, difficult to weld steels such as:, 25CrMo4, 42CrMo4, 50CrMo4, 42MnV7, 1.7218, 1.7225, 1.7228, 1.7223, AISI: 4130, 4140, 4150, C45, C60, tool steel repairs etc* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 29 9 AWS A5.9 - ER 312

Weldstar ER316L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. The presence of molybdenum provides creep resistance in a halide atmosphere. Ideal for joining and surfacing of stainless steels of similar composition (CrNi and CrNiMo steels/cast steels). Including low-carbon molybdenum-bearing austenitic alloys. Typically used in the food processing, dairy and chemical industries etc.    Typical Base Materials All 300 series austenitic stainless steel, mainly low-carbon molybdenum-bearing* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 19 12 3 L AWS A5.9 - ER 316L

Weldstar ER317L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire used for welding alloys of a similar chemical composition. Ideal for severely corrosive environments where crevice and pitting corrosion are of concern. Low carbon content reduces the possibilities of intergranular carbide precipitation. Not suitable for structural service above 400°C or for cryogenic applications. Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance. Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.    Typical Base Materials Stainless CrNiMo steels e.g. 317L or similar** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 15 3 L AWS A5.9 - ER 317 / 317L   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.43 0.45 <0.030 <0.030                   Ni% Cr% Mo% Cu%       13.60 18.82 3.55 <0.75         Mechanical Properties Tensile Strength ≥480 MPa   Yield Strength ≥300 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weldstar ER347 Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant presence of niobium, that provides resistance to intergranular chromium carbide precipitation, thus increasing the resistance to intergranular corrosion. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for welding and overlay of chromium-nickel stainless steel base metals of similar composition, stabilised either by Nb or Ti (e.g. types 321 and 347). Typically used on applications for the chemical industry, particularly at high temperatures (e.g. equipment intermittently heated within a temperature range varying from 400°C to 800°C). Including applications such as firewalls, pressure vessels, food processing, dairy, oil and textile industries etc.    Typical Base Materials All 300 series austenitic stainless steel, particularly 321 and 347 (stabilised)* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 19 9 Nb Si AWS A5.9 - ER 347Si

Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG Features and Applications Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion. ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure. Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many  engineering purposes. Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Typically used on applications for heat furnaces and turbine part production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 13 AWS A5.9 - ER 410   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.015 0.55 0.48 0.004 0.028                   Ni% Cr% Mo% Cu%       0.37 12.90 0.08 0.15         Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥250 MPa   Elongation ≥15 %