Fein 150MM Circular Saw Blade For Steel
Extremely long service life thanks to very wear-resistant carbide substrate.|The special tooth geometry ensures minimal cutting forces and prevents high temperatures from developing, making excellent results possible when dry cutting construction steel. The vibration dampening laser ornaments ensure very smooth-running when sawing with the F-IRON Cut 57 AS. Technical data Material HM (carbide) Saw blade Ø 150 mm Teeth 30 Cutting width 1.2 mm
Fein CCG 18-125-15 AS Cordless 5"(125MM) Angle Grinder
Cordless angle grinder, 125 mm in diameter Powerful cordless angle grinder with the same output as a corresponding corded 1500 W device, for effective dividing, grinding and deburring tasks. Key features Powerful cordless angle grinder with brushless motor, which can handle very tough requirements and industrial applications, especially in combination with the ProCORE 18 V battery technology. Extensive user protection features include soft start, restart protection, kickback monitoring, electronic overload protection, fall monitoring and brake. It’s got the knack: manual speed settings via the intuitive control panel allow the speeds to be adapted perfectly to a large range of materials and grinding materials. Secure hold for all applications thanks to non-slip handle. Safety hood, which can be adjusted without the use of tools, and quick-clamping nuts make for short setup times. Compatible with all 18 V AMPShare ProCORE batteries and chargers for even more power and flexibility. Also suitable for 18 V Bosch Professional cordless devices. COOLPACK 2.0 technology delivers a 135% longer battery life and therefore makes longer operating times possible. State-of-the-art cell technology and intelligent battery management deliver 87% more power than with conventional batteries. ProCORE Li-Ion battery with high-power cells, charge status indicator and “Electronic Cell Protection” (ECP). ECP protects against overload, overheating and total discharge. Ideally equipped for every form of use. Mobile working with the L-BOXX system.
Fein CG15-125BLP Premium 5" 125MM Angle Grinder With Low HAVS
Details Outstanding service life thanks to brushless FEIN PowerDrive motor with fully enclosed motor housing and motor electronics fitted separately. Optimum protection for the motor from aggressive ceramic and mineral dusts and therefore reduction in downtimes and maintenance costs. Comprehensive user protection provided by soft start, restart protection, blockage monitoring, electronic overload protection, speed preselection, kick-back monitoring, anti-vibration handle and brake. Optimum cooling and temperature monitoring. Eye for carabiner to secure the angle grinder and prevent it falling off when working at height. Weighs just 2.2 kg with an output power of 1050 W for an excellent power-to-weight ratio. Quick-clamping nut included in scope of supply for changing grinding materials in a matter of seconds and without the need for any tools. Fatigue-free working thanks to narrow grip dimensions, compact design and a well-balanced low weight. New anti-vibration handle improves the grip by up to 16% compared with standard handles. Any vibration is also minimised. Industrial cable H07, length 4m.
Fein F-Iron Cut 57 AS Metal Cutting Circular Saw Bare Unit
Fein F-Iron Cut 57 AS Metal Cutting Circular Saw Bare Unit The Fein F-Iron Cut 57 AS cordless circular saw is a powerful cordless circular saw for fast, precise cold cuts in sheet metal, tubes, and profiles up to 57 mm cutting depth. High performance – low weight: 50% more material is removed than with standard metal circular saws as the brushless motor, ProCORE battery and optimally coordinated saw blade interact perfectly. And the tool weighs just 3Kg Housing and safety hood made from die-cast aluminium and swarf collecting vessel made from material with low flammability for maximum protection from hot metal chips with sharp edges. Thanks to the LED working lamp, the user has an unobstructed view of the cutting line at all times Pipes, profiles, metal grilles and sheet metals with a cutting depth of up to 57mm can be sawn rapidly and precisely. Guide rail adaptor for straight, long cuts – compatible with guide rails from Makita, BOSCH, Festool, Mafell Manual speed setting (6 levels) for optimum results with a whole host of materials and no rework Cold cuts for cuts with virtually no sparks or burrs The LED light is activated in advance by the release switch Safety hood closes in < 0.3s even after 50,000 cycles Better handling – low weight, ergonomic handles including Softgrip for right and left-handed users Electronic user protection: Efficient brake (0.2s), temperature-based shutdown to avoid permanent damage to tool and battery, restart protection, dead man’s switch Large swarf collecting vessel made from material with low flammability for long intervals between emptying Heat-resistant, scratch-resistant and impact-resistant housing made from die-cast aluminium Compatible with all 18V AMPShare ProCORE batteries and chargers for even more power and flexibility. Also suitable for 18V Bosch Professional cordless devices Maximum work progress with AMPShare 18V ProCORE batteries: COOLPACK 2.0 technology delivers a 135% longer battery life. State-of-the-art cell technology and intelligent battery management deliver 87% more power than conventional batteries. “Electronic Cell Protection” (ECP) protects the battery from overload, overheating and total discharge
Fein WSG 7-115 4-1/2" 700W Compact Angle Grinder - 230V
Details Perfect ergonomics thanks to lateral slide switch and small grip dimension. Fatigue-free working thanks to low weight. Solid metal gearbox head can be turned in 90° steps for maximum robustness and service life and very good access to difficult-to-reach spots. Enhanced safety through integrated restart protection.
Fein WSG 8-115 (4-1/2") Angle Grinder
Fein WSG 8-115 (4-1/2") Angle Grinder Carbon brushes last up to 30% longer and tool removes more material than comparable angle grinders. Solid metal gearbox head for maximum robustness and service life. The lightest model of its kind. H 07 industrial cable. The best vibration performance in its class. Safety hood can be adjusted without tools and has anti-twist protection. Spindle lock.
Features: Delivers up to 2.5x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (results depend on tool and application) REDLITHIUM-ION protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Durable metal frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Water protection routes water away from the electronics & out of the battery pack Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life On-board battery fuel gauge helps the user to maximize his battery run-time efficiency Specification: Voltage (V) 18 Battery pack capacity (Ah) 5.0
Milwaukee 18V Cordless 1" Impact Wrench One Key
THE WORLD'S FIRST CORDLESS 1" IMPACT WRENCH ON THE MARKET.Body Only - supplied WITHOUT batteries or charger.Comes with Case. 1" square drive tool reception. World's first cordless M18™ 1" high torque impact wrench replacing AC, petrol and pneumatic wrenches. The M18 FUEL™ high torque impact wrench delivers 2033 Nm of fastening torque at half the size and weight of AC, petrol or pneumatic solutions. Delivers up to 2400 Nm of nut-busting torque that enables bolts up M42 to open. The 4 -Mode DRIVE CONTROL™ allows the user to shift into four different speed and torque settings to maximise application versatility. The integrated blow counting sensor enhances the consistent repeatability of the chosen torque setting. ONE-KEY™ tool control enables wireless tool customisation for increased productivity and consistent results. ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention. Flexible battery system: works with all Milwaukee® M18™ batteries. Includes : side handle & metal hook
Milwaukee 18V Fuel 165MM Circular Saw
Features: Milwaukee® designed and built brushless POWERSTATE™ motor for up to 3x longer motor life and up to 2x more cuts per charge Integrated battery fuel gauge & LED light Flexible battery system: works with all Milwaukee® M18™ batteries REDLINK PLUS™ intelligence system delivers the most advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load Individual battery cell monitoring optimises tool run time and ensures long term pack durability 50° bevel capacity Magnesium upper and lower guards provide best in class durability for impact resistance Magnesium shoe reduces weight and maximises durability Integrated dust blower keeps cut line clear Hang hook allows safe storage of the tool Please note: This is a bodyonly item and does not include a battery or charger. Comes with: Saw blade Specification: Blade diameter (mm): 165 Bore size (mm): 15.87 Max. cutting depth 45° (mm): 41 Max. cutting depth 90° (mm): 55 No load speed (rpm): 5000 Sound power level (dB(A)): 91.8 Sound power level uncertainty (dB(A)): 3 Sound pressure level (dB(A)): 80.8 Sound pressure level uncertainty (dB(A)): 3 Vibration level (m/s²): 2.45 Vibration uncertainty (m/s²): 1.5 Voltage (V): 18
Milwaukee 18V Fuel 3/4" Impact Wrench Kit With Friction Ring
The Milwaukee M18ONEFHIWF34-502X bundle includes the Milwaukee impact wrench, x2 5Ah batteries, charger and case. The impact wrench is ideal to use in tight spaces with its compact design being only 213mm. The impact wrench delivers 1626Nm of fastening torque and has 4-mode drive control which gives the user the option to change into four different speed and torque settings. Mode 4 is ideal to use for bolt removal as it has a maximum nut-busting torque of 2033Nm which shifts to 750 rpm giving you unmatched control when removing fasteners. The M12-18FC rapid fast charger is ideal for charging your Milwaukee batteries from M12, M14 and M18 quickly. The charger can charge 2.0Ah, 4.0Ah, 5.0ah, 6.0Ah and 9.0Ah battery pack and can charge M18 and M12 at the same time. This Milwaukee M18CASEPP case is the perfect case to keep your Milwaukee M18FPD & M18FID or M18ONEPD-0 & M18ONEID-0 safe and protected from dust, debris and the elements. The Milwaukee 5.0Ah Red Lithium-Ion Battery has REDLITHIUM-ION™ sophisticated electronics (REDLINK™ Intelligence) and overload protection which stops the user from causing damage to their cordless power tools. The batteries also feature a temperature Management System which keeps the battery at the ideal temperature alongside individual cell monitoring which helps to provide maximum battery life whilst also preventing cell damage. The remaining charge of the battery can be seen on the fuel gauge. Features and Benefits:3/4" friction ring receptionMode 4 bolt removal, provides a maximum nut-busting torque of 1898 Nm then shifts to 750 rpm for unmatched control when removing fastenersThe integrated blow counting sensor enhances the consistent repeatability of the chosen torque settingONE-KEY tool control enables wireless tool customisation for increased productivity and consistent resultsONE-KEY tool tracking & security offers a Cloud-based inventory management platform that supports both location tracking and theft preventionTechnical Specifications:No load speed (rpm) 0 - 1850 / 0 - 2400Tool reception 3/4" squareMax. fastening torque [Nm] 1626Nut busting torque [Nm] 2033Fastening torque [Nm] 1626Weight with battery pack (kg) 3.3 (batteries not supplied)Supplied With x1 Impact Wrenchx2 5Ah Batteriesx1 Chargerx1 Case
Milwaukee 18V Fuel 9" Angle Grinder
The Milwaukee M18FLAG230XPDB 18v M18 Li-ion FUEL 9in Angle Grinder is designed to complete the toughest grinding, surface preparation, and cutting applications with any 180mm or 230mm accessory.The M18FLAG230XPDB-0 has a POWERSTATE brushless motor provides 6,600 RPM and higher speeds under load for corded grinding/cutting performance. Features and Benefits: 100% tool free: make all accessory changes and guard adjustments without a wrench for increased productivity Metal housing and gearing system providing legendary durability Advanced ergonomics for increased mobility and productivity Dual action trigger: eliminating accidental trigger actuation
Milwaukee 18V Fuel Packout 7Ltr Wet & Dry Vac Body Only
Milwaukee 18V Fuel Packout 7Ltr Wet & Dry Vac Body Only The M18 FUEL™ PACKOUT™ wet/ dry vacuum is fully compatible with the MILWAUKEE® PACKOUT™ Modular Storage System. POWERSTATE™ brushless motor delivers powerful performance to easily clean up common wet and dry jobsite debris. PACKOUT™ compatibility gives this cordless wet/ dry vac outstanding mobility, saving the time spent hauling tools on and off the jobsite. Usable on and off the PACKOUT™ stack makes this wet/ dry cleanup solution most portable and versatile. The highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 microns. Delivers up to 30 minutes of run time on a HIGH OUTPUT™ 8.0 Ah battery pack in high mode and over 50 minutes in low mode. Internal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipment. The DEK 26 power tool connector allows for efficient dust extraction from power tools. Extendable hose up to 1.6 m for extended reach and versatility. Flexible battery system: works with all MILWAUKEE® M18™ batteries. Specification: Voltage: 18V Battery type: Li-ion Capacity liquids: 7.0 L Dimensions: 430 x 280 x 330 mm Dust class: L Hose diameter: 41 mm Hose length: 1.5 m Max. vacuum: 117 mbar Weight: 5.6 kg Body only – not supplied with batteries or charger.
Milwaukee 18V Grease Gun Bare Unit
Powerful 18V motor delivers over 562 bar max. operating pressure REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability Best in class run time - dispenses up to 7 cartridges per charge Superior handle balance and ergonomics - only 355 mm long and 3.9 kg Air bleeder valve - priming mechanism for quick flow Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and less down time Three way loading - bulk, cartridge and suction capable Grease capacity 400 ml cartridge, 473 ml bulk Individual battery cell monitoring optimises tool run time and ensures long term pack durability REDLITHIUM™-ION battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life Flexible battery system: works with all MILWAUKEE® M18™ batteries Supplied with 1219 mm high pressure flex hose with spring guard
Milwaukee Fixtec M14 Quick Locking Angle Grinder Flange Nut
The Milwaukee 4932352473 Fixtec Quick Locking Flange Nut is designed to provide fast, tool-free disc changes for angle grinders, improving efficiency and convenience on the job. Ideal for professionals and DIY users, this innovative self-locking flange nut eliminates the need for a spanner wrench, allowing for quick and easy accessory swaps with minimal downtime. Key Features: Tool-Free Operation – Enables quick and easy disc changes without the need for additional tools, reducing downtime and increasing productivity. Universal Compatibility – Designed to fit most M14 spindle angle grinders, making it a versatile addition to your tool kit. Secure Locking Mechanism – Ensures a tight and reliable grip on cutting and grinding discs, preventing slippage during operation. Durable Construction – Made from high-quality steel for long-lasting performance and resistance to wear. Compact & Lightweight Design – Does not add unnecessary bulk to your grinder, maintaining balance and maneuverability. Ideal For: Professional tradespeople Construction and metalworking applications DIY users looking for a hassle-free disc change solution Cutting, grinding, and polishing tasks Why Choose Milwaukee? Milwaukee is known for its high-performance, innovative tool solutions, and the Fixtec Quick Locking Flange Nut is no exception. By allowing rapid, tool-free disc changes, this accessory enhances efficiency, safety, and convenience, making it an essential addition to any grinder setup.
Features: Delivers up to 2x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (results depend on tool and application) REDLITHIUM-ION™ protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life Discharge protection prevents cell damage from over-discharge
Features: Delivers up to 3x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (Results depend on tool and application) REDLITHIUM-ION™ protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life Discharge protection prevents cell damage from over-discharge
Milwaukee M18 Cordless Fuel 18V Air Compressor
Our M18 FUEL™ 2 Gallon Compact Quiet Compressor is designed for the professional carpenter and remodeler. This quiet air compressor is only 68dB(A), making it the quietest cordless compressor on the market and quieter than most corded options. We’ve designed this 2-gallon air compressor to be high performing while reducing the noise professionals deal with on jobsites. Its low profile and stackable design allow our portable air compressor to be easily stored and transported on, around, and back off the jobsite. It has run-time professionals need to stay productive, giving you up to 1,600 18ga brad nails per charge. It is compatible with all MILWAUKEE® M18™ REDLITHIUM™ batteries making it easy to swap packs and keep running to finish your job. Features: The quietest cordless compressor available at only 68dB(A) Compact for easy carrying & less fatigue while transporting Part of the M18™ System, featuring 200+ solutions Specifications Sound Level 68 dB(a) Tank Capacity 2 Gallons Max PSI 135 SCFM 1.2 @ 90 PSI Pump Type Oil Free Regulator Single Turn Length 16.25" Width 18.62" Weight 31.2lbs Height 10.62" Power Source Cordless
Milwaukee M18FB6 6AH Forge Battery
Milwaukee M18FB6 6AH Forge Battery M18 REDLITHIUM™ FORGE™ 6.0 Ah battery delivers HIGH OUTPUT™ 12.0 Ah power in a smaller size with less weight. 15 min super charge to 80% with the M18™ dual bay super charger. The most powerful, fast charging and long lasting batteries within the REDLITHIUM™ battery range. Chemical resistant housing. REDLINK™ intelligence. Compatible with all M18™ tools in the range. Enhanced onboard fuel gauge. Delivers HIGH OUTPUT™ 12.0 Ah power in a smaller size and lighter weight 15 min super charge to 80% with the M18 dual bay super charger Longest life for the most recharges and best performance over the life of the pack REDLITHIUM™ FORGE™ provides the most powerful, fastest charging, and longest life batteries within REDLITHIUM™ Best protection from jobsite, weather, and environmental conditions Resistant housing designed to provide increased protection against common oils, solvents, and greases REDLINK™ intelligence, our battery circuitry provides optimised performance and overload protection using total system communication between tool, battery and charger Compatible with all M18 Milwaukee tools Enhanced onboard fuel gauge with readability in direct sun light Charge time with M12-18FC Charger – 60min Charge time with M12-18SC Charger – 35min
Milwaukee M18FPD3-0 Gen 4 Combi Drill Bare Unit
Milwaukee M18FPD3-0 Gen 4 Combi Drill M18FPD3: 13mm Chuck Max Drilling Masonry - 16mm Max Drilling Steel - 16mm Max Drilling Wood - 89mm Max Percussion Rate - 0-33,000 BPM Max Torque - 158 NM No Load Speed Gear 1 - 0-500RPM No Load Speed Gear 2 - 0-2100RPM Higher power efficiency under load with outstanding torque of 158 Nm Extremely compact design of 175 mm length for access into tight spaces AUTOSTOP™ control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up 13 mm metal chuck for quick bit changes and bit retention Fastest drilling and driving applications under load Brighter LED workspace illumination Fuel gauge displays remaining charge All metal reversible belt clip to hang your tool quickly and easily Individual battery cell monitoring optimises tool run time and ensures long term pack durability
Milwaukee M18FPD3-502X 18V Combi Drill Package C/W 2 x 5AH Batteries
Milwaukee M18FPD3-502X 18V Combi Drill Package C/W 2 x 5AH Batteries, Charger & Case Higher power efficiency under load with outstanding torque of 158N Extremely compact design of 175 mm length for access into tight spaces AUTOSTOP control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up 13 mm metal chuck for quick bit changes and bit retention Fastest drilling and driving applications under load Brighter LED workspace illumination Fuel gauge displays remaining charge All metal reversible belt clip to hang your tool quickly and easily Individual battery cell monitoring optimises tool run time and ensures long term pack durability
Milwaukee M18FSAGV115XPDB-0 Vari-Speed 115MM Angle Grinder
Why WE Love The Milwaukee M18FSAGV115XPDB-0 Angle Grinder The Milwaukee M18 FSAGV115XPDB-0 is an 18V angle grinder, delivering corded performance similar to a 1200W grinder. It has a 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal, allowing for maximum control for every application. Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack, and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time, and durability on the jobsite. Comes supplied as a bare unit (no batteries or charger included). M18 FSAGV115XPDB-0X Features: Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal Delivering corded performance similar to a 1200 W grinder RAPIDSTOP for fastest disc brake in less than 2 seconds and best user protection Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up Anti-vibration side handle for lower vibration Integrated FIXTEC system for tool-free wheel change Slim handle design Removable dust screen to prevent debris entrance, prolonging motor life 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite Flexible battery system: works with all MILWAUKEE M18 batteries M18 FSAGV115XPDB-0X Specification: Anti kickback protection: Yes Article Number: 4933478773 Battery pack capacity (Ah): No batteries supplied Battery type: Li-ion Brake: Yes Braking time [s]: < 2 Cutting depth (mm): 28 Disc diameter (mm): 115 Line lock out function: Yes No load speed (rpm): 3500 - 8500 No. of batteries supplied: 0 Soft start function: Yes Standard equipment: Quick release safety guard, cutting guard clip, AVS side handle, flange, flange nut, spanner, dust screen Supplied in: HD Box Switch type: Paddle (Deadman) switch Voltage (V): 18 What is included: 1x 18V Fuel 115mm Angle Grinder with Paddle Switch (Body Only) 1x HD Box